Skip to content
worldfires
VE · Venezuela · –

Independencia fire, April 2018 Independencia, Libertador

Out · last detection

The fire started on in Independencia, Venezuela, and satellites saw it burning for 12 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 5,154 hectares from heat detections, spread across 2 municipalities.

It is number 10 by size of the 112 fires with a page that started in Anzoátegui since 2016. Number 9 in Venezuela in 2018, of 107.

Burnt area
5,154ha
GWIS perimeter (Copernicus)
Duration
12days
3 Apr 2018 – 14 Apr 2018
Municipalities hit
2
municipalities
Started on
3 Apr
2018
Heat detections
160
in a single hotspot: 77 MW
Danger at start
37
High · FWI index
Average daily power
125MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 3 Apr14 Apr
14 Apr 2018

How it evolved, day by day

3 Apr 2018 · 1 MW · 1 5 Apr 2018 · 6 MW · 6 6 Apr 2018 · 15 MW · 2 7 Apr 2018 · 2 MW · 1 10 Apr 2018 · 335 MW · 10 11 Apr 2018 · 15 MW · 12 12 Apr 2018 · 405 MW · 55 13 Apr 2018 · 320 MW · 58 14 Apr 2018 · 31 MW · 15
3 Apr 6 Apr 10 Apr 12 Apr 14 Apr

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

36°high
49km/h · peak gust
29%lowest humidity

It had gone 12 days without rain (1 mm or more) when it started. Rain came after the fire: 6.6 mm on 16 Apr.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 3.3% of the area of London (52 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Independencia 30,016 inhabitants where it started
    3,111 ha reached on 3 Apr
    0.4 %
  2. Libertador 45,274 inhabitants
    2,075 ha reached on 11 Apr
    0.6 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
3 Apr 34.7 °C 42 % 45 km/h 0.6 mm High 37
4 Apr 36.1 °C 38 % 43 km/h 0.4 mm High 29
5 Apr 35.8 °C 32 % 36 km/h 0.0 mm High 33
6 Apr 36.1 °C 29 % 37 km/h 0.0 mm High 32
7 Apr 35.0 °C 34 % 44 km/h 0.0 mm High 35
8 Apr 34.7 °C 37 % 40 km/h 0.0 mm High 37
9 Apr 35.1 °C 41 % 42 km/h 0.5 mm Very high 39
10 Apr 34.4 °C 41 % 44 km/h 0.1 mm Very high 38
11 Apr 34.2 °C 40 % 42 km/h 0.0 mm Very high 40
12 Apr 34.8 °C 37 % 44 km/h 0.0 mm Very high 40
13 Apr 35.4 °C 37 % 49 km/h 0.2 mm Very high 43
14 Apr 33.9 °C 45 % 46 km/h 1.3 mm Very high 38
15 Apr after 33.9 °C 46 % 49 km/h 0.6 mm High 31
16 Apr after 34.4 °C 47 % 43 km/h 6.6 mm High 23

Its twins: fires that started in the same weather

It started with an FWI of 36.6, a minimum humidity of 42% and 12 days without rain. Fires in the area that started in weather like this since 2016: 28.

FWI at the start 36.6
Minimum humidity 42 %
Days without rain 12
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Maturín fire, March 2019
14,047 ha 5 days FWI 37.9 Min. humidity 41 % 31 km away, in 2019

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

6 days
median duration
2,382 ha
median area
100 %
went past 1,000 ha
2.4 mm
rain at the end (median; 16 of 28 had it)

It was 2.2 times larger than the median of its twins and lasted 12 days, against 6 days.

Only 6 of its 28 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 12 of 28, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.4 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

6.6 mmfirst rain
16 Apr2 days after it ended
49km/h · max. gust

It was considered over on 14 Apr, and on 16 Apr 6.6 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 16 of 28, with a median of 2.4 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 27 Mar 2018
After · 21 Apr 2018

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 160Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Venezuela

Frequently asked questions

How long did the Independencia fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 3 April 2018 to 14 April 2018 (12 days). The perimeter dates it from 10 April 2018 to 14 April 2018.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 5,154 hectares (51.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Independencia (3,111 ha, 0.4 %); Libertador (2,075 ha, 0.6 %).
What was the weather like?
During the fire the temperature reached 36.1 °C, humidity dropped to 29 % and gusts hit 49 km/h. The fire danger index (FWI) reached 43, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Venezuela (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 28. Their median duration was 6 days and their median area 2,382 ha; 100 % went past 1,000 ha. Only 6 of its 28 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 12 of 28, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.4 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 10 April 2018 → 3 April 2018.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 10 April 2018 to 14 April 2018. 160 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.