Skip to content
worldfires
US · United States · –

Ikheenjik Fire, June 2025 Yukon-Koyukuk

Out · last detection 19 Jul 2025, 22:36 UTC

The fire started on 20 June 2025 in Yukon-Koyukuk, United States, and satellites saw it burning for 30 days. United States agencies (MTBS / NIFC) mapped an official burnt perimeter of 14,562 hectares, spread across a single county.

It is the 72th largest in Alaska since 2016 (of 472 with a page). Number 23 in United States in 2025, of 325.

Burnt area
14,562ha
official perimeter (MTBS / NIFC)
Duration
≈ 30days
20 Jun 2025 – 19 Jul 2025
Counties hit
1
counties
Started on
20 Jun
2025
Heat detections
727
in a single hotspot: 507 MW
Danger at start
31
High · FWI index
Average daily power
1.0GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 20 Jun19 Jul
19 Jul 2025

How it evolved, day by day

20 Jun 2025 · 3,318 MW · 132 21 Jun 2025 · 3,427 MW · 53 22 Jun 2025 · 372 MW · 26 23 Jun 2025 · 383 MW · 34 2 Jul 2025 · 150 MW · 6 3 Jul 2025 · 494 MW · 48 4 Jul 2025 · 2,474 MW · 78 5 Jul 2025 · 2,214 MW · 162 6 Jul 2025 · 1,706 MW · 161 7 Jul 2025 · 36 MW · 10 8 Jul 2025 · 24 MW · 6 13 Jul 2025 · 6 MW · 1 18 Jul 2025 · 16 MW · 3 19 Jul 2025 · 24 MW · 7
21 Jun 4 Jul 7 Jul 18 Jul

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

30°high
48km/h · peak gust
18%lowest humidity

It had gone 14 days without rain (1 mm or more) when it started. Rain came after the fire: 1.7 mm on 21 Jul.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 9.2% of the area of London (146 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each county

  1. Yukon-Koyukuk where it started
    14,721 ha reached on 20 Jun
    0.0 %

Burnt area inside each county, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
20 Jun 29.6 °C 23 % 31 km/h 1.6 mm High 31
21 Jun 28.8 °C 21 % 22 km/h 0.1 mm Moderate 21
22 Jun 27.5 °C 30 % 27 km/h 1.5 mm High 22
23 Jun 23.5 °C 49 % 34 km/h 3.4 mm Low 9
24 Jun 20.3 °C 60 % 24 km/h 6.4 mm Very low 0
25 Jun 23.9 °C 44 % 36 km/h 0.8 mm Very low 4
26 Jun 21.7 °C 41 % 24 km/h 0.5 mm Low 8
27 Jun 23.2 °C 31 % 18 km/h 0.0 mm Moderate 12
28 Jun 23.1 °C 39 % 19 km/h 0.2 mm Moderate 16
29 Jun 22.2 °C 43 % 27 km/h 2.8 mm Moderate 19
30 Jun 23.9 °C 35 % 16 km/h 0.0 mm Very low 4
1 Jul 26.3 °C 33 % 24 km/h 0.1 mm Moderate 14
2 Jul 25.1 °C 33 % 37 km/h 0.0 mm High 24
3 Jul 26.8 °C 28 % 22 km/h 0.0 mm High 22
4 Jul 28.2 °C 27 % 27 km/h 0.0 mm High 27
5 Jul 29.0 °C 18 % 30 km/h 0.0 mm High 37
6 Jul 27.3 °C 29 % 24 km/h 0.8 mm High 30
7 Jul 25.6 °C 33 % 30 km/h 0.7 mm High 24
8 Jul 19.8 °C 60 % 45 km/h 5.2 mm Moderate 16
9 Jul 17.5 °C 69 % 48 km/h 11.4 mm Very low 0
10 Jul 18.1 °C 60 % 27 km/h 3.3 mm Very low 0
11 Jul 22.9 °C 38 % 23 km/h 0.0 mm Very low 2
12 Jul 23.9 °C 36 % 30 km/h 0.0 mm Low 10
13 Jul 24.8 °C 34 % 28 km/h 0.1 mm Moderate 15
14 Jul 24.6 °C 40 % 38 km/h 1.1 mm Moderate 18
15 Jul 18.6 °C 49 % 42 km/h 0.6 mm Moderate 13
16 Jul 20.2 °C 47 % 19 km/h 0.0 mm Low 9
17 Jul 20.8 °C 52 % 18 km/h 0.0 mm Low 10
18 Jul 25.3 °C 34 % 23 km/h 0.0 mm Moderate 16
19 Jul 25.7 °C 37 % 25 km/h 0.0 mm Moderate 17
20 Jul after 26.0 °C 35 % 21 km/h 0.0 mm Moderate 16
21 Jul after 22.4 °C 39 % 42 km/h 1.7 mm Low 10

Its twins: fires that started in the same weather

It started with an FWI of 30.9, a minimum humidity of 23% and 14 days without rain. Fires in the area that started in weather like this since 2016: 13.

FWI at the start 30.9
Minimum humidity 23 %
Days without rain 14
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Goose Fire, June 2022
4,690 ha 44 days FWI 34.4 Min. humidity 24 % 150 km away, in 2022

First rain (1 mm or more) after it ended: 5.1 mm on 14 Aug.

What happened to them

Fires in the area that started in similar weather: 13. With fewer than 15 we give no figures: they would be more noise than signal.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.7 mmfirst rain
21 Jul2 days after it ended
48km/h · max. gust

It was considered over on 19 Jul, and on 21 Jul 1.7 mm fell. We do not know whether the rain or the firefighters put it out.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 13 Jun 2025
After · 26 Jul 2025

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 23 June 2025 the air beside the fire reached 83 µg/m³ of PM2.5. That day averaged 66: 4.4 times the WHO daily guideline (15).

PM2.5 peak83 µg/m³
Days over the guideline3 days
PM1088 µg/m³
Optical depth2.05
18 Jun20 Jun22 Jun
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 727Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in United States

Frequently asked questions

How long did the Ikheenjik Fire last?
The official perimeter only gives the start date (20 June 2025). The end comes from the heat detections inside the perimeter: it burned until 19 July 2025 (30 days from 20 June 2025), the last day with detections before more than 10 days in a row without any, so it is approximate.
How much area did it burn?
The official perimeter published by United States agencies (MTBS / NIFC) is 14,562 hectares (145.6 km²). Other tallies, such as daily incident reports, may give slightly different figures.
Which counties burned?
The fire only entered Yukon-Koyukuk (14,721 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 29.6 °C, humidity dropped to 18 % and gusts hit 48 km/h. The fire danger index (FWI) reached 37, class High.
Where does this data come from?
From the official burnt perimeter of United States agencies (MTBS / NIFC, public domain), NASA FIRMS VIIRS hotspots and the administrative boundaries of United States. It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

How we know this
  • Perimeter: NIFC WFIGS (United States), official; 2 polygons grouped in this page.
  • The official perimeter has no end date: the end is the last day with VIIRS detections inside the perimeter before a gap of more than 10 days (150 days at most), so it is approximate. 727 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter is official and in the public domain. For past years it comes from MTBS (Monitoring Trends in Burn Severity), run by the U.S. Geological Survey and the USDA Forest Service, which map it on Landsat and Sentinel-2 imagery. For the current and last year it comes from WFIGS at the National Interagency Fire Center (NIFC): incident perimeters mapped by fire crews, aircraft and imagery. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. County boundaries come from geoBoundaries ADM2 (Public Domain). The area per county is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from official figures.