Skip to content
worldfires
PG · Papua New Guinea · –

Ijivitari District fire, July 2026 Ijivitari District

Out · last detection 1 Aug 2026, 04:02 UTC

The fire started on 21 July 2026 in Ijivitari District, Papua New Guinea, and satellites saw it burning for 12 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 2,314 hectares from heat detections, spread across a single municipality.

Number 159 in Papua New Guinea in 2026, of 198.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Compare with…

Suggestions: Ijivitari District · 2026

Burnt area
2,314ha
GWIS perimeter (Copernicus)
Duration
12days
21 Jul 2026 – 1 Aug 2026
Municipalities hit
1
districts
Started on
21 Jul
2026
Heat detections
45
in a single hotspot: 137 MW
Danger at start
7
Low · FWI index
Average daily power
87MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 21 Jul1 Aug
1 Aug 2026

How it evolved, day by day

22 Jul 2026 · 16 MW · 6 23 Jul 2026 · 528 MW · 20 24 Jul 2026 · 47 MW · 3 26 Jul 2026 · 16 MW · 3 28 Jul 2026 · 3 MW · 1 29 Jul 2026 · 3 MW · 1 30 Jul 2026 · 65 MW · 9 1 Aug 2026 · 15 MW · 2
23 Jul 28 Jul 30 Jul

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

30°high
50km/h · peak gust
50%lowest humidity

It had gone 2 days without rain (1 mm or more) when it started. Rain came after the fire: 1.5 mm on 8 Aug.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 1.5% of the area of London (23 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Ijivitari District where it started
    2,332 ha reached on 22 Jul
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
21 Jul 27.7 °C 57 % 44 km/h 0.1 mm Low 7
22 Jul 28.1 °C 52 % 37 km/h 0.0 mm Low 9
23 Jul 28.2 °C 52 % 50 km/h 0.0 mm Moderate 12
24 Jul 28.5 °C 50 % 50 km/h 0.0 mm Moderate 14
25 Jul 28.4 °C 53 % 28 km/h 0.0 mm Low 10
26 Jul 28.6 °C 53 % 32 km/h 0.0 mm Low 11
27 Jul 29.3 °C 54 % 28 km/h 0.0 mm Moderate 11
28 Jul 29.5 °C 51 % 31 km/h 0.0 mm Low 11
29 Jul 28.9 °C 55 % 26 km/h 0.0 mm Moderate 11
30 Jul 29.4 °C 52 % 43 km/h 0.0 mm Moderate 17
31 Jul 29.3 °C 54 % 39 km/h 0.0 mm Moderate 15
1 Aug 29.2 °C 52 % 22 km/h 0.0 mm Moderate 12
2 Aug after 30.2 °C 48 % 24 km/h 0.0 mm Moderate 14
3 Aug after 27.8 °C 52 % 50 km/h 0.0 mm Moderate 18
4 Aug after 27.9 °C 53 % 43 km/h 0.0 mm Moderate 20
5 Aug after 28.6 °C 53 % 33 km/h 0.0 mm Moderate 17
6 Aug after 30.2 °C 53 % 24 km/h 0.0 mm Moderate 16
7 Aug after 30.5 °C 58 % 27 km/h 0.4 mm Moderate 16
8 Aug after 27.9 °C 70 % 21 km/h 1.5 mm Low 9

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 14 Jul 2026
After · 8 Aug 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 22 July 2026 the air beside the fire reached 41 µg/m³ of PM2.5. That day averaged 23: 1.6 times the WHO daily guideline (15).

PM2.5 peak41 µg/m³
Days over the guideline4 days
PM1042 µg/m³
Optical depth0.28
19 Jul23 Jul27 Jul31 Jul4 Aug
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 45Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Papua New Guinea

Frequently asked questions

How long did the Ijivitari District fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 21 July 2026 to 1 August 2026 (12 days). The perimeter dates it from 22 July 2026 to 26 July 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 2,314 hectares (23.1 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Ijivitari District (2,332 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 29.5 °C, humidity dropped to 50 % and gusts hit 50 km/h. The fire danger index (FWI) reached 17, class Moderate.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Papua New Guinea (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 5 November 2026.
  1. Page published (2,314 ha).

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 22 July 2026 to 26 July 2026. 45 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.