Skip to content
worldfires
CD · Democratic Republic of the Congo · →

Idiofa fire, 12 August 2026 Idiofa

Out · last detection 28 Aug 2026, 12:23 UTC

The fire started on 12 August 2026 in Idiofa, Democratic Republic of the Congo, and satellites saw it burning for 17 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 5,298 hectares from heat detections, spread across a single municipality.

It is the 221th largest in Kwilu since 2016 (of 236 with a page). Number 476 in Democratic Republic of the Congo in 2026, of 523.

Compare with…
Burnt area
5,298ha
GWIS perimeter (Copernicus)
Duration
17days
12 Aug 2026 – 28 Aug 2026
Municipalities hit
1
territories
Started on
12 Aug
2026
Heat detections
122
in a single hotspot: 87 MW
Danger at start
21
Moderate · FWI index
Average daily power
121MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 12 Aug28 Aug
28 Aug 2026

How it evolved, day by day

12 Aug 2026 · 7 MW · 1 13 Aug 2026 · 22 MW · 4 14 Aug 2026 · 20 MW · 4 15 Aug 2026 · 16 MW · 2 16 Aug 2026 · 20 MW · 2 17 Aug 2026 · 51 MW · 3 20 Aug 2026 · 187 MW · 12 22 Aug 2026 · 161 MW · 2 23 Aug 2026 · 158 MW · 15 24 Aug 2026 · 354 MW · 25 25 Aug 2026 · 272 MW · 18 27 Aug 2026 · 188 MW · 22 28 Aug 2026 · 115 MW · 12
12 Aug 14 Aug 16 Aug 20 Aug 23 Aug 24 Aug 25 Aug 28 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

36°high
31km/h · peak gust
34%lowest humidity

It had gone 4 days without rain (1 mm or more) when it started. Rain came after the fire: 7.5 mm on 29 Aug.

This area had burned before

97% of the perimeter overlaps earlier fires recorded since 2016: 1,250 ha in 2016, 1,031 ha in 2017, 896 ha in 2019, 3,254 ha in 2021, 1,602 ha in 2023, 2,117 ha in 2024, 2,670 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 5,118 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 3.3% of the area of London (53 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Idiofa where it started
    5,330 ha reached on 12 Aug
    0.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area1.5 ha
Residents≈ 150

Inside the perimeter there were about 1.5 hectares of built-up land and about 150 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
12 Aug 33.8 °C 39 % 22 km/h 0.0 mm Moderate 21
13 Aug 34.0 °C 44 % 20 km/h 0.1 mm Moderate 20
14 Aug 32.7 °C 46 % 22 km/h 0.1 mm High 22
15 Aug 31.7 °C 46 % 24 km/h 0.0 mm High 22
16 Aug 32.6 °C 43 % 23 km/h 0.1 mm High 22
17 Aug 33.6 °C 34 % 30 km/h 0.0 mm High 27
18 Aug 33.3 °C 34 % 23 km/h 0.0 mm High 26
19 Aug 33.5 °C 35 % 29 km/h 0.0 mm High 27
20 Aug 31.7 °C 47 % 31 km/h 0.3 mm High 25
21 Aug 31.8 °C 46 % 20 km/h 0.0 mm High 24
22 Aug 32.4 °C 53 % 27 km/h 4.4 mm Low 5
23 Aug 31.9 °C 58 % 25 km/h 1.5 mm Low 6
24 Aug 32.5 °C 45 % 22 km/h 0.0 mm Moderate 15
25 Aug 34.4 °C 43 % 26 km/h 0.1 mm Moderate 21
26 Aug 31.2 °C 56 % 26 km/h 3.4 mm Very low 5
27 Aug 35.5 °C 38 % 19 km/h 0.0 mm Moderate 18
28 Aug 32.4 °C 56 % 31 km/h 12.5 mm Very low 2
29 Aug after 29.5 °C 61 % 28 km/h 7.5 mm Very low 1

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 5 Aug 2026
After · 4 Sept 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 19 August 2026 the air beside the fire reached 380 µg/m³ of PM2.5. That day averaged 204: 14 times the WHO daily guideline (15).

PM2.5 peak380 µg/m³
Days over the guideline21 days
PM10395 µg/m³
Optical depth3.92
111213141516171819202122232425262728293031
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 122Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Democratic Republic of the Congo ›

Frequently asked questions

How long did the Idiofa fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 12 August 2026 to 28 August 2026 (17 days). The perimeter dates it from 18 August 2026 to 28 August 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 5,298 hectares (53.0 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Idiofa (5,330 ha, 0.3 %).
What was the weather like?
During the fire the temperature reached 35.5 °C, humidity dropped to 34 % and gusts hit 31 km/h. The fire danger index (FWI) reached 27, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Democratic Republic of the Congo (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 13 August 2026 → 12 August 2026.

RSS Changes to this page

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 18 August 2026 to 28 August 2026. 122 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology ›

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.