Skip to content
worldfires
LA · Laos · –

Huoixai fire, 25 March 2020 Huoixai

Out · last detection

The fire started on in Huoixai, Laos, and satellites saw it burning for 15 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,079 hectares from heat detections, spread across a single municipality.

It is number 33 by size of the 60 fires with a page that started in Bokeo since 2016. Number 94 in Laos in 2020, of 188.

The power measured by the satellite is low (29.9 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
3,079ha
GWIS perimeter (Copernicus)
Duration
15days
25 Mar 2020 – 8 Apr 2020
Municipalities hit
1
districts
Started on
25 Mar
2020
Heat detections
136
in a single hotspot: 30 MW
Danger at start
47
Very high · FWI index
Average daily power
46MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 25 Mar8 Apr
8 Apr 2020

How it evolved, day by day

25 Mar 2020 · 30 MW · 1 26 Mar 2020 · 1 MW · 1 27 Mar 2020 · 1 MW · 1 28 Mar 2020 · 7 MW · 3 31 Mar 2020 · 6 MW · 3 1 Apr 2020 · 96 MW · 13 2 Apr 2020 · 176 MW · 52 3 Apr 2020 · 102 MW · 29 4 Apr 2020 · 44 MW · 11 6 Apr 2020 · 20 MW · 5 7 Apr 2020 · 46 MW · 9 8 Apr 2020 · 17 MW · 8
25 Mar 28 Mar 2 Apr 6 Apr

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

37°high
47km/h · peak gust
18%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started. Rain came after the fire: 12.9 mm on 13 Apr.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 1.9% of the area of London (31 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Huoixai where it started
    3,095 ha reached on 25 Mar
    1.8 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with 60 days without rain: 3.6 % of the area in Laos

Day High Min. humidity Peak gust Rain Danger (FWI)
25 Mar 34.3 °C 21 % 46 km/h 0.0 mm Very high 47
26 Mar 34.4 °C 19 % 44 km/h 0.0 mm Extreme 51
27 Mar 34.8 °C 21 % 39 km/h 0.0 mm Very high 50
28 Mar 35.3 °C 22 % 38 km/h 0.0 mm Very high 47
29 Mar 35.9 °C 25 % 41 km/h 0.0 mm Extreme 52
30 Mar 36.2 °C 25 % 39 km/h 0.0 mm Very high 48
31 Mar 36.5 °C 24 % 35 km/h 0.0 mm Very high 45
1 Apr 36.9 °C 21 % 42 km/h 0.0 mm Extreme 53
2 Apr 36.2 °C 18 % 44 km/h 0.0 mm Extreme 54
3 Apr 36.5 °C 19 % 39 km/h 0.0 mm Extreme 52
4 Apr 36.3 °C 21 % 37 km/h 0.0 mm Extreme 51
5 Apr 35.7 °C 26 % 47 km/h 0.2 mm Very high 50
6 Apr 35.1 °C 25 % 43 km/h 0.0 mm Very high 49
7 Apr 35.8 °C 21 % 40 km/h 0.0 mm Very high 48
8 Apr 35.1 °C 25 % 42 km/h 0.0 mm Very high 44
9 Apr after 33.9 °C 35 % 45 km/h 0.3 mm Very high 44
10 Apr after 35.5 °C 22 % 47 km/h 0.0 mm Very high 45
11 Apr after 35.3 °C 27 % 30 km/h 0.0 mm High 36
12 Apr after 35.9 °C 25 % 42 km/h 0.1 mm Very high 42
13 Apr after 25.4 °C 65 % 32 km/h 12.9 mm Very low 1

Its twins: fires that started in the same weather

It started with an FWI of 46.6, a minimum humidity of 21% and more than two months without rain. Fires in the area that started in weather like this since 2016: 34.

FWI at the start 46.6
Minimum humidity 21 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Wiang Pa Pao fire, April 2019
1,078 ha 7 days FWI 47.6 Min. humidity 21 % 193 km away, in 2019

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

9 days
median duration
2,294 ha
median area
100 %
went past 1,000 ha
1.6 mm
rain at the end (median; 14 of 34 had it)

It burned an area similar to its twins (3,079 ha against a median of 2,294 ha) and lasted 15 days, against 9 days.

In 20 of 34, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.6 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

12.9 mmfirst rain
13 Apr5 days after it ended
47km/h · max. gust

It was considered over on 8 Apr, and on 13 Apr 12.9 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 14 of 34, with a median of 1.6 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 18 Mar 2020
After · 15 Apr 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 136Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Laos

Frequently asked questions

How long did the Huoixai fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 25 March 2020 to 8 April 2020 (15 days). The perimeter dates it from 31 March 2020 to 8 April 2020.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,079 hectares (30.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Huoixai (3,095 ha, 1.8 %).
What was the weather like?
During the fire the temperature reached 36.9 °C, humidity dropped to 18 % and gusts hit 47 km/h. The fire danger index (FWI) reached 54, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Laos (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 34. Their median duration was 9 days and their median area 2,294 ha; 100 % went past 1,000 ha. In 20 of 34, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.6 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 31 March 2020 to 8 April 2020. 136 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.