Skip to content
worldfires
MX · Mexico · →

Huetamo fire, March 2023 Huetamo, San Lucas

Out · last detection 31 Mar 2023, 20:10 UTC

The fire started on 28 March 2023 in Huetamo, Mexico, and satellites saw it burning for 4 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 1,637 hectares from heat detections, spread across 2 municipalities. According to CONAFOR, it was detected on 29 March 2023 and declared extinguished on 2 April 2023.

It is the 89th largest in Michoacan de Ocampo since 2016 (of 111 with a page). Number 253 in Mexico in 2023, of 285.

The power measured by the satellite is low (24.8 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Compare with…
Burnt area
1,637ha
GWIS perimeter (Copernicus)
Duration
4days
28 Mar 2023 – 31 Mar 2023
Municipalities hit
2
municipalities
Started on
28 Mar
2023
Heat detections
59
in a single hotspot: 25 MW
Danger at start
55
Extreme · FWI index
Average daily power
102MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 28 Mar31 Mar
31 Mar 2023

How it evolved, day by day

28 Mar 2023 · 35 MW · 4 29 Mar 2023 · 126 MW · 30 30 Mar 2023 · 8 MW · 4 31 Mar 2023 · 241 MW · 21
28 Mar 29 Mar 30 Mar 31 Mar

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

37°high
41km/h · peak gust
12%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

100% of the perimeter overlaps earlier fires recorded since 2016: 1,464 ha in 2017, 1,508 ha in 2021. Part of it burned more than once, so the yearly figures add up to more than the 1,640 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 1% of the area of London (16 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Huetamo where it started
    1,410 ha reached on 28 Mar
    0.7 %
  2. 236 ha reached on 29 Mar
    0.5 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

Official record

According to CONAFOR, this fire started on 29 March 2023 and burned 1,454 ha (the satellite measured 1,637 ha).

CONAFOR (Comisión Nacional Forestal), estadística de incendios forestales en datos.gob.mx (CC BY 4.0). This is the agency’s consolidated statistic: it measures the area in its own way, which is why it can differ from the satellite.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
28 Mar 36.6 °C 12 % 41 km/h 0.0 mm Extreme 55
29 Mar 36.9 °C 20 % 40 km/h 0.0 mm Extreme 52
30 Mar 35.1 °C 21 % 41 km/h 0.0 mm Very high 49
31 Mar 37.1 °C 18 % 36 km/h 0.0 mm Very high 46
1 Apr after 37.4 °C 15 % 42 km/h 0.0 mm Extreme 50
2 Apr after 38.0 °C 15 % 41 km/h 0.0 mm Extreme 51
3 Apr after 37.6 °C 16 % 47 km/h 0.0 mm Extreme 52
4 Apr after 35.7 °C 21 % 41 km/h 0.0 mm Extreme 51
5 Apr after 36.0 °C 21 % 38 km/h 0.0 mm Very high 48
6 Apr after 35.2 °C 28 % 44 km/h 0.0 mm Very high 47
7 Apr after 36.6 °C 21 % 43 km/h 0.0 mm Very high 47
8 Apr after 36.3 °C 19 % 38 km/h 0.0 mm Very high 45
9 Apr after 36.7 °C 23 % 42 km/h 0.0 mm Very high 46
10 Apr after 36.7 °C 22 % 39 km/h 0.0 mm Very high 48

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 21 Mar 2023
After · 7 Apr 2023

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 1 April 2023 the air beside the fire reached 28 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak28 µg/m³
Days over the guideline0 days
PM1042 µg/m³
Optical depth0.61
262728293031123
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 59Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Mexico ›

Frequently asked questions

How long did the Huetamo fire last?
GWIS (Copernicus) dates it between 28 March 2023 and 31 March 2023: 4 days between the first and last heat detection of the perimeter. According to CONAFOR, it was detected on 29 March 2023 and declared extinguished on 2 April 2023.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 1,637 hectares (16.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Huetamo (1,410 ha, 0.7 %); San Lucas (236 ha, 0.5 %).
What was the weather like?
During the fire the temperature reached 37.1 °C, humidity dropped to 12 % and gusts hit 41 km/h. The fire danger index (FWI) reached 55, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Mexico (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · Emergency number and official warnings ›

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

No changes since 24 October 2026.

RSS Changes to this page

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 59 Suomi-NPP VIIRS detections on those dates.
  • Compared with CONAFOR: 1,454 official ha against 1,637 ha of perimeter; they agree within 25%.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology ›

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.