Skip to content
worldfires
BO · Bolivia · –

Huacaraje fire, November 2026 Huacaraje

Burning · last detection 21 Nov 2026, 06:03 UTC

The fire started on 18 November 2026 in Huacaraje, Bolivia, and satellites saw it burning for 4 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 7,157 hectares from heat detections, spread across a single municipality.

Number 18 in Bolivia in 2026, of 88.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Is it still active?

Satellites detected fire on 21 Nov 2026, 06:03 UTC. Everything suggests it is still burning. Satellites pass a few times a day and cloud or smoke can hide the fire: a lack of detections is not an official extinction. Each country’s emergency service declares a fire contained or out.

Wind, humidity and rain for the next 72 h

Burnt area
7,157ha
GWIS perimeter (Copernicus)
Duration
4days
18 Nov 2026 – 21 Nov 2026
Municipalities hit
1
municipalities
Started on
18 Nov
2026
Heat detections
118
in a single hotspot: 46 MW
Danger at start
11
Low · FWI index
Average daily power
414MW
detected power per day, on average

The next 72 hours

The wind is blowing from the north and pushing southwards; around Mon 23, 20:00 it shifts and starts blowing from the north-east.

ECMWF IFS 0.25° at the centre of the fire · computed 21 Nov 2026, 09:23 UTC

Mon 23, 14:00 – Mon 23, 20:00, local time

The wind shifts 83° in 6 h

It stops blowing from the north-west and starts blowing from the north-east, at 15 km/h with gusts of 30 km/h. After a shift like this, the smoke and the most active side of the fire can move.

Checked, no warning: nights recover humidity (peaks of 79 % or more) no useful rain expected (3.3 mm in 72 h)

Hour by hour, local time

Tap the strip to see each hour

Mean wind Gusts where it blows to Relative humidity Night (8 pm to 8 am) Rain (mm) · chance in %

Where is it blowing? The next 48 h

geoBoundaries/GeoBolivia (Public Domain)

At this hour

Places the fan reaches

    Is it heading my way?

    We compare your point with the fan for each hour. Your location never leaves your device.

    or tap the map

    This is not an official warning. It is a global model forecast with cells of about 25 km, at the centre of the fire: it cannot see valley winds or the winds the fire itself creates. The fan shows where the wind blows, not where the fire will spread. If in doubt, follow what the authorities say.

    Emergencies · Bolivia 119 · 110 Emergency number and official warnings

    Forecast: ECMWF IFS 0.25° (European Centre for Medium-Range Weather Forecasts), served by our own Open-Meteo instance; the chance of rain comes from the ECMWF ensemble. Variables: wind and gusts at 10 m, wind at 850 hPa, relative humidity and temperature at 2 m, rain. Open-Meteo.com (CC BY 4.0).

    Fire: GWIS / Copernicus (reconstructed from VIIRS) (CC BY 4.0); hotspots from the last 24 h: VIIRS from NASA FIRMS. Boundaries: geoBoundaries/GeoBolivia (Public Domain).

    How it is worked out: wind shift = a change of more than 60° in 6 h or less, with at least 15 km/h before and after; no overnight recovery = peak humidity between 8 pm and 8 am stays below 55 %; useful rain = 2 mm or more in 6 h. The fan opens 18° plus however much the wind varies within ±3 h and reaches 25 km beyond the edge of the fire: one model cell, not a rate of spread. Methodology

    Where it burned

    HOTSPOTS BY DAY 18 Nov21 Nov
    21 Nov 2026

    How it evolved, day by day

    18 Nov 2026 · 547 MW · 28 19 Nov 2026 · 231 MW · 38 20 Nov 2026 · 464 MW · 52 21 Nov 2026 · 0 MW · 0
    18 Nov 19 Nov 20 Nov 21 Nov

    Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

    Fire front film How it spread from one satellite pass to the next (10 passes) and with what wind. Watch the film

    The weather it burned in

    36°high
    48km/h · peak gust
    49%lowest humidity

    It had gone 0 days without rain (1 mm or more) when it started.

    This area had burned before

    52% of the perimeter overlaps earlier fires recorded since 2016: 1,639 ha in 2016, 270 ha in 2017, 1,831 ha in 2018, 394 ha in 2019, 995 ha in 2020, 3,417 ha in 2021, 4,441 ha in 2022, 2,529 ha in 2023, 4,879 ha in 2024. Part of it burned more than once, so the yearly figures add up to more than the 3,688 ha that had burned before.

    How big is it?

    10 km
    It burned the equivalent of 4.5% of the area of London (72 km² against 1,583 km²).

    London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

    This compares size, not location: both shapes are at the same scale, north up, centred on each other.

    What happened to each town

    1. Huacaraje 4,630 inhabitants where it started
      7,199 ha reached on 18 Nov
      1.3 %

    Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

    The weather day by day

    ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

    Open-Meteo.com (CC BY 4.0) · forecast models, provisional until the ERA5 reanalysis arrives

    Day High Min. humidity Peak gust Rain Danger (FWI)
    18 Nov 34.2 °C 52 % 48 km/h 3.2 mm Low 11
    19 Nov 34.8 °C 54 % 40 km/h 1.6 mm Moderate 13
    20 Nov 35.7 °C 49 % 39 km/h 0.7 mm Moderate 15

    Before and after, from space

    Drag the line to compare the same ground before the fire and after it.

    Before · 11 Nov 2026
    After · 20 Nov 2026

    If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

    The smoke

    CAMS · Copernicus

    On 19 November 2026 the air beside the fire reached 36 µg/m³ of PM2.5. That day averaged 16: 1.1 times the WHO daily guideline (15).

    PM2.5 peak36 µg/m³
    Days over the guideline1 day
    PM1036 µg/m³
    Optical depth0.43
    16171819
    Good Fair Moderate Poor Very poor Extremely poor

    Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

    Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

    Detections table · 118Every satellite heat detection, one by one, with time, satellite, power and coordinates.
    ⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
    Date and timeSatelliteFRP (MW)LatLon

    Other fires nearby

    All fires in Bolivia

    Frequently asked questions

    How long did the Huacaraje fire last?
    GWIS (Copernicus) dates it between 18 November 2026 and 21 November 2026: 4 days between the first and last heat detection of the perimeter.
    How much area did it burn?
    The perimeter GWIS (Copernicus) rebuilt from heat detections is 7,157 hectares (71.6 km²). It is an estimate: official national figures may differ.
    Which municipalities burned?
    The fire only entered Huacaraje (7,199 ha, 1.3 %).
    Is the Huacaraje fire still active?
    Yes: satellites detected fire on 21 Nov 2026, 06:03 UTC. Check the emergency service for the official status.
    What was the weather like?
    During the fire the temperature reached 35.7 °C, humidity dropped to 49 % and gusts hit 48 km/h. The fire danger index (FWI) reached 15, class Moderate.
    What weather is expected at the fire over the next 72 hours?
    The wind is blowing from the north and pushing southwards; around Mon 23, 20:00 it shifts and starts blowing from the north-east. The wind shifts 83° in 6 h (Mon 23, 14:00 – Mon 23, 20:00). Times are local time at the fire. ECMWF IFS forecast (Open-Meteo) computed 21 Nov 2026, 09:23 UTC; this is not an official warning.
    Where does this data come from?
    From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Bolivia (geoBoundaries). It is not an official report.

    Where to verify it

    A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

    Emergency number: 119 · 110 · Emergency number and official warnings

    Satellite cross-check

    History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 20 November 2026.
    1. Page published (3,688 ha).

    RSS Changes to this page With cross-checks and a citable version

    Does something look wrong on this page?

    This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

    Report an error
    What do you think is wrong?

    We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 119 · 110.

    How we know this
    • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
    • Dates from the perimeter: the VIIRS detections inside it did not change them. 118 Suomi-NPP VIIRS detections on those dates.
    • We have not matched this page with any official record.
    • Weather: ECMWF IFS model, provisional until the ERA5 reanalysis arrives.

    How we build fire pages: methodology

    Where this data comes from

    The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.