Skip to content
worldfires
UA · Ukraine ·

Holo Prystan fire, 30 July 2026 Скадовський район · Ukraine

Out · last detection 30 Jul 2026, 11:40 UTC

The fire started on 30 July 2026 in Holo Prystan, Ukraine, and satellites saw it burning for 1 day. Copernicus mapped a burnt perimeter of 127 hectares from satellite imagery, spread across a single municipality.

It is the 905th largest in Kherson Oblast since 2016 (of 1102 with a page). Number 755 in Ukraine in 2026, of 984.

Burnt area
127ha
Copernicus perimeter
Duration
≈ 1day
30 Jul 2026 – 30 Jul 2026
Municipalities hit
0
districts
Started on
30 Jul
2026
Heat detections
7
in a single hotspot: 103 MW
Danger at start
32
High · FWI index
Average daily power
158MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 30 Jul30 Jul

How it evolved, day by day

30 Jul 2026 · 158 MW · 7

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

27°high
32km/h · peak gust
36%lowest humidity

It had gone one day without rain (1 mm or more) when it started.

This area had burned before

32% of the perimeter overlaps earlier fires recorded since 2016: 40 ha in 2024, 6 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 41 ha that had burned before.

What burned

  • Other natural land92 %
  • Agricultural areas6.3 %
  • Artificial surfaces1.6 %

Land cover inside the perimeter as reported by Copernicus EFFIS (outside the Corine Land Cover area).

People and buildings inside the perimeter

GHSL 2025
Built-up area0.45 ha
Residents< 20

Inside the perimeter there were about 0.45 hectares of built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
30 Jul 27.4 °C 36 % 32 km/h 0.0 mm High 32
31 Jul after 29.7 °C 30 % 25 km/h 0.0 mm High 30
1 Aug after 31.6 °C 23 % 30 km/h 0.0 mm Very high 40
2 Aug after 33.4 °C 22 % 24 km/h 0.0 mm High 36
3 Aug after 33.9 °C 24 % 36 km/h 0.0 mm Very high 47
4 Aug after 35.3 °C 25 % 41 km/h 0.0 mm Extreme 57
5 Aug after 35.2 °C 26 % 21 km/h 0.0 mm High 34
6 Aug after 35.7 °C 28 % 22 km/h 0.0 mm High 37
7 Aug after 36.2 °C 24 % 44 km/h 0.0 mm Extreme 58
8 Aug after 35.8 °C 22 % 42 km/h 0.1 mm Extreme 52
9 Aug after 31.2 °C 40 % 45 km/h 0.0 mm Extreme 55

Its twins: fires that started in the same weather

It started with an FWI of 31.6, a minimum humidity of 36% and 1 day without rain. Fires in the area that started in weather like this since 2022: 20.

FWI at the start 31.6
Minimum humidity 36 %
Days without rain 1
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Oleshky fire, August 2023
365 ha 6 days FWI 32.0 Min. humidity 36 % 81 km away, in 2023

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

4 days
median duration
216 ha
median area
5 %
went past 1,000 ha
2.4 mm
rain at the end (median; 17 of 20 had it)

It stayed below its twins: 127 ha against a median of 216 ha. It lasted 1 day, against 4 days.

In 3 of 20, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.4 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
32km/h · max. gust

It was considered over on 30 Jul, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 17 of 20, with a median of 2.4 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2022.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 23 Jul 2026
After · 6 Aug 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 2 August 2026 the air beside the fire reached 14 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak14 µg/m³
Days over the guideline0 days
PM1017 µg/m³
Optical depth0.38
28 Jul30 Jul1 Aug
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 7Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Ukraine

Frequently asked questions

How long did the Holo Prystan fire last?
The official perimeter only gives the start date (30 July 2026). The end comes from the heat detections inside the perimeter: it burned until 30 July 2026 (1 day from 30 July 2026), the last day with detections before more than 10 days in a row without any, so it is approximate.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 127 hectares (1.3 km²). Official national figures may differ.
What was the weather like?
During the fire the temperature reached 27.4 °C, humidity dropped to 36 % and gusts hit 32 km/h. The fire danger index (FWI) reached 32, class High.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Ukraine (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2022 with a similar FWI, humidity and dry spell: 20. Their median duration was 4 days and their median area 216 ha; 5 % went past 1,000 ha. In 3 of 20, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.4 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 101 · 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 101 · 112.

How we know this
  • Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
  • The official perimeter has no end date: the end is the last day with VIIRS detections inside the perimeter before a gap of more than 10 days (150 days at most), so it is approximate. 7 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.