Skip to content
worldfires
AU · Australia · –

Halls Creek fire, 9 August 2025 Halls Creek

Out · last detection

The fire started on in Halls Creek, Australia, and satellites saw it burning for 4 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 6,636 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Compare with…

Suggestions: Halls Creek · 2023Halls Creek · 2018

Burnt area
6,636ha
GWIS perimeter (Copernicus)
Duration
4days
9 Aug 2025 – 12 Aug 2025
Municipalities hit
1
local government areas
Started on
9 Aug
2025
Heat detections
246
in a single hotspot: 225 MW
Danger at start
82
Very extreme · FWI index
Average daily power
1.6GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 9 Aug12 Aug
12 Aug 2025

How it evolved, day by day

9 Aug 2025 · 4 MW · 3 10 Aug 2025 · 381 MW · 42 11 Aug 2025 · 2,075 MW · 99 12 Aug 2025 · 3,786 MW · 102
9 Aug 10 Aug 11 Aug 12 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

31°high
50km/h · peak gust
13%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

20% of the perimeter overlaps earlier fires recorded since 2016: 245 ha in 2022, 1,063 ha in 2023, 26 ha in 2024.

How big is it?

10 km
It burned the equivalent of 4.2% of the area of London (66 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Halls Creek where it started
    6,618 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 43 % of the area in Australia 60 days without rain: 8.2 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
9 Aug 30.9 °C 20 % 46 km/h 0.0 mm Very extreme 82
10 Aug 30.4 °C 19 % 35 km/h 0.0 mm Extreme 58
11 Aug 30.5 °C 17 % 37 km/h 0.0 mm Extreme 61
12 Aug 30.3 °C 13 % 50 km/h 0.0 mm Very extreme 92
13 Aug after 29.2 °C 17 % 57 km/h 0.0 mm Very extreme 101
14 Aug after 30.1 °C 19 % 46 km/h 0.0 mm Very extreme 80
15 Aug after 29.8 °C 15 % 38 km/h 0.0 mm Very extreme 71
16 Aug after 29.7 °C 13 % 42 km/h 0.0 mm Very extreme 80
17 Aug after 28.6 °C 14 % 46 km/h 0.0 mm Very extreme 87
18 Aug after 27.2 °C 13 % 44 km/h 0.0 mm Very extreme 76
19 Aug after 27.3 °C 9 % 50 km/h 0.0 mm Very extreme 84
20 Aug after 27.9 °C 12 % 40 km/h 0.0 mm Very extreme 71
21 Aug after 29.5 °C 10 % 34 km/h 0.0 mm Extreme 63
22 Aug after 31.5 °C 8 % 37 km/h 0.0 mm Very extreme 80

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 2 Aug 2025
After · 19 Aug 2025

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 12 August 2025 the air beside the fire reached 5 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak5 µg/m³
Days over the guideline0 days
PM105 µg/m³
Optical depth0.09
7 Aug9 Aug11 Aug13 Aug15 Aug
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 246Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Halls Creek fire last?
GWIS (Copernicus) dates it between 9 August 2025 and 12 August 2025: 4 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 6,636 hectares (66.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Halls Creek (6,618 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 30.9 °C, humidity dropped to 13 % and gusts hit 50 km/h. The fire danger index (FWI) reached 92, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 246 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.