Skip to content
worldfires
AU · Australia · –

Halls Creek fire, June 2023 Halls Creek

Out · last detection

The fire started on in Halls Creek, Australia, and satellites saw it burning for 3 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 6,211 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
6,211ha
GWIS perimeter (Copernicus)
Duration
3days
3 Jun 2023 – 5 Jun 2023
Municipalities hit
1
local government areas
Started on
3 Jun
2023
Heat detections
152
in a single hotspot: 404 MW
Danger at start
59
Extreme · FWI index
Average daily power
2.7GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 3 Jun5 Jun
5 Jun 2023

How it evolved, day by day

3 Jun 2023 · 431 MW · 47 4 Jun 2023 · 552 MW · 35 5 Jun 2023 · 7,068 MW · 70
3 Jun 4 Jun 5 Jun

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

31°high
39km/h · peak gust
14%lowest humidity

It had gone 49 days without rain (1 mm or more) when it started.

This area had burned before

47% of the perimeter overlaps earlier fires recorded since 2016: 1,539 ha in 2016, 1,388 ha in 2017, 275 ha in 2022. Part of it burned more than once, so the yearly figures add up to more than the 2,914 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 3.9% of the area of London (62 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Halls Creek where it started
    6,268 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 43 % of the area in Australia Very dry air: 28 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
3 Jun 30.9 °C 14 % 32 km/h 0.0 mm Extreme 59
4 Jun 29.2 °C 20 % 33 km/h 0.0 mm Extreme 58
5 Jun 29.9 °C 30 % 39 km/h 0.0 mm Extreme 52
6 Jun after 28.7 °C 39 % 35 km/h 0.0 mm Very high 44
7 Jun after 28.0 °C 42 % 23 km/h 0.0 mm High 33
8 Jun after 30.0 °C 27 % 38 km/h 0.0 mm Extreme 57
9 Jun after 30.6 °C 22 % 36 km/h 0.0 mm Extreme 59
10 Jun after 31.1 °C 32 % 44 km/h 0.0 mm Extreme 66
11 Jun after 31.4 °C 28 % 22 km/h 0.0 mm High 38
12 Jun after 30.6 °C 26 % 26 km/h 0.0 mm Very high 40
13 Jun after 29.2 °C 20 % 46 km/h 0.0 mm Very extreme 76
14 Jun after 27.9 °C 19 % 39 km/h 0.0 mm Very extreme 70
15 Jun after 27.3 °C 17 % 36 km/h 0.0 mm Extreme 67

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 27 May 2023
After · 12 Jun 2023

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 6 June 2023 the air beside the fire reached 113 µg/m³ of PM2.5. That day averaged 59: 3.9 times the WHO daily guideline (15).

PM2.5 peak113 µg/m³
Days over the guideline3 days
PM10162 µg/m³
Optical depth0.49
1 Jun3 Jun5 Jun7 Jun
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 152Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Halls Creek fire last?
GWIS (Copernicus) dates it between 3 June 2023 and 5 June 2023: 3 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 6,211 hectares (62.1 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Halls Creek (6,268 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 30.9 °C, humidity dropped to 14 % and gusts hit 39 km/h. The fire danger index (FWI) reached 59, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 152 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.