Skip to content
worldfires
MZ · Mozambique · –

Gurué fire, 11 September 2020 Namarrói, Gurué

Out · last detection 29 Sept 2020, 11:49 UTC

The fire started on 11 September 2020 in Gurué, Mozambique, and satellites saw it burning for 19 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,277 hectares from heat detections, spread across 2 municipalities.

It is the 462th largest in Zambézia since 2016 (of 562 with a page). Number 163 in Mozambique in 2020, of 193.

Burnt area
3,277ha
GWIS perimeter (Copernicus)
Duration
19days
11 Sept 2020 – 29 Sept 2020
Municipalities hit
2
districts
Started on
11 Sept
2020
Heat detections
129
in a single hotspot: 60 MW
Danger at start
32
High · FWI index
Average daily power
90MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 11 Sept29 Sept
29 Sept 2020

How it evolved, day by day

11 Sept 2020 · 4 MW · 1 13 Sept 2020 · 28 MW · 4 14 Sept 2020 · 49 MW · 6 16 Sept 2020 · 15 MW · 2 17 Sept 2020 · 31 MW · 3 18 Sept 2020 · 770 MW · 57 19 Sept 2020 · 107 MW · 13 20 Sept 2020 · 44 MW · 8 21 Sept 2020 · 210 MW · 10 22 Sept 2020 · 23 MW · 5 24 Sept 2020 · 8 MW · 3 25 Sept 2020 · 63 MW · 5 26 Sept 2020 · 30 MW · 1 27 Sept 2020 · 15 MW · 2 28 Sept 2020 · 5 MW · 1 29 Sept 2020 · 45 MW · 8
11 Sept 18 Sept 21 Sept 26 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

34°high
48km/h · peak gust
23%lowest humidity

It had gone 7 days without rain (1 mm or more) when it started.

This area had burned before

43% of the perimeter overlaps earlier fires recorded since 2016: 1,022 ha in 2016, 1,178 ha in 2017, 2 ha in 2018. Part of it burned more than once, so the yearly figures add up to more than the 1,413 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 2.1% of the area of London (33 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. 3,292 ha
    1.1 %
  2. Gurué where it started
    0 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
11 Sept 27.3 °C 35 % 36 km/h 0.0 mm High 32
12 Sept 26.2 °C 44 % 41 km/h 0.0 mm High 35
13 Sept 27.7 °C 44 % 33 km/h 0.0 mm High 31
14 Sept 31.9 °C 31 % 22 km/h 0.0 mm High 29
15 Sept 32.3 °C 30 % 26 km/h 0.0 mm High 34
16 Sept 31.8 °C 30 % 26 km/h 0.0 mm High 34
17 Sept 32.7 °C 29 % 27 km/h 0.0 mm High 36
18 Sept 30.4 °C 25 % 37 km/h 0.0 mm Very high 46
19 Sept 30.9 °C 27 % 28 km/h 0.0 mm Very high 40
20 Sept 31.8 °C 25 % 26 km/h 0.0 mm High 36
21 Sept 31.9 °C 26 % 30 km/h 0.0 mm High 36
22 Sept 28.7 °C 39 % 46 km/h 0.0 mm Very high 47
23 Sept 25.3 °C 52 % 45 km/h 2.0 mm Moderate 16
24 Sept 28.1 °C 38 % 31 km/h 0.0 mm High 27
25 Sept 31.6 °C 28 % 19 km/h 0.0 mm High 29
26 Sept 33.5 °C 23 % 46 km/h 0.0 mm Very high 45
27 Sept 34.0 °C 25 % 48 km/h 0.0 mm Very high 48
28 Sept 33.8 °C 28 % 39 km/h 0.0 mm Very high 42
29 Sept 33.3 °C 27 % 30 km/h 0.0 mm Very high 43
30 Sept after 32.3 °C 29 % 40 km/h 0.0 mm Very high 44
1 Oct after 33.8 °C 27 % 28 km/h 0.0 mm High 38
2 Oct after 35.4 °C 23 % 44 km/h 0.0 mm Very high 43
3 Oct after 34.1 °C 26 % 38 km/h 0.0 mm Very high 45
4 Oct after 33.6 °C 34 % 30 km/h 0.0 mm Very high 38
5 Oct after 31.9 °C 43 % 38 km/h 0.4 mm High 37
6 Oct after 27.2 °C 52 % 31 km/h 0.0 mm High 28
7 Oct after 28.5 °C 40 % 38 km/h 0.0 mm High 30
8 Oct after 28.0 °C 47 % 29 km/h 0.0 mm High 25
9 Oct after 31.2 °C 37 % 23 km/h 0.0 mm High 26

Its twins: fires that started in the same weather

It started with an FWI of 32.4, a minimum humidity of 35% and 7 days without rain. Fires in the area that started in weather like this since 2016: 38.

FWI at the start 32.4
Minimum humidity 35 %
Days without rain 7
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Lugela fire, October 2017
14,441 ha 25 days FWI 31.7 Min. humidity 35 % 62 km away, in 2017

First rain (1 mm or more) after it ended: 10.0 mm on 29 Oct.

What happened to them

19 days
median duration
4,572 ha
median area
26 %
went past 10,000 ha
3.6 mm
rain at the end (median; 32 of 38 had it)

It burned an area similar to its twins (3,277 ha against a median of 4,572 ha) and lasted 19 days, against 19 days.

In 6 of 38, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.6 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
48km/h · max. gust

It was considered over on 29 Sept, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 32 of 38, with a median of 3.6 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 4 Sept 2020
After · 6 Oct 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 129Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Mozambique

Frequently asked questions

How long did the Gurué fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 11 September 2020 to 29 September 2020 (19 days). The perimeter dates it from 17 September 2020 to 22 September 2020.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,277 hectares (32.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Namarrói (3,292 ha, 1.1 %); Gurué (0 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 34.0 °C, humidity dropped to 23 % and gusts hit 48 km/h. The fire danger index (FWI) reached 48, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Mozambique (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 38. Their median duration was 19 days and their median area 4,572 ha; 26 % went past 10,000 ha. In 6 of 38, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.6 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 3 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Name: Namarrói → Gurué.
  2. Last day with fire: 22 September 2020 → 29 September 2020.
  3. Start date: 17 September 2020 → 11 September 2020.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 17 September 2020 to 22 September 2020. 129 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.