Skip to content
worldfires
CD · Democratic Republic of the Congo · →

Gungu fire, 22 May 2026 Gungu, Kahemba, Feshi

Out · last detection 22 Jun 2026, 11:38 UTC

The fire started on 22 May 2026 in Gungu, Democratic Republic of the Congo, and satellites saw it burning for 32 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 17,034 hectares from heat detections, spread across 3 municipalities.

It is the 32th largest in Kwilu since 2016 (of 235 with a page). Number 95 in Democratic Republic of the Congo in 2026, of 523.

Compare with…
Burnt area
17,034ha
GWIS perimeter (Copernicus)
Duration
32days
22 May 2026 – 22 Jun 2026
Municipalities hit
3
territories
Started on
22 May
2026
Heat detections
467
in a single hotspot: 192 MW
Danger at start
8
Low · FWI index
Average daily power
306MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 22 May22 Jun
22 Jun 2026

How it evolved, day by day

22 May 2026 · 16 MW · 3 24 May 2026 · 10 MW · 3 25 May 2026 · 25 MW · 5 26 May 2026 · 24 MW · 6 27 May 2026 · 43 MW · 2 28 May 2026 · 41 MW · 3 29 May 2026 · 59 MW · 8 30 May 2026 · 61 MW · 10 31 May 2026 · 237 MW · 27 1 Jun 2026 · 625 MW · 33 2 Jun 2026 · 235 MW · 15 3 Jun 2026 · 302 MW · 21 4 Jun 2026 · 1,002 MW · 26 5 Jun 2026 · 26 MW · 5 6 Jun 2026 · 2,018 MW · 61 7 Jun 2026 · 40 MW · 6 9 Jun 2026 · 1,656 MW · 89 10 Jun 2026 · 338 MW · 13 11 Jun 2026 · 8 MW · 2 12 Jun 2026 · 577 MW · 27 13 Jun 2026 · 115 MW · 12 14 Jun 2026 · 117 MW · 15 15 Jun 2026 · 235 MW · 24 16 Jun 2026 · 3 MW · 1 17 Jun 2026 · 791 MW · 21 19 Jun 2026 · 43 MW · 3 20 Jun 2026 · 126 MW · 12 21 Jun 2026 · 78 MW · 11 22 Jun 2026 · 16 MW · 3
22 May 28 May 2 Jun 6 Jun 7 Jun 13 Jun 19 Jun

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

34°high
37km/h · peak gust
22%lowest humidity

It had gone 2 days without rain (1 mm or more) when it started.

This area had burned before

83% of the perimeter overlaps earlier fires recorded since 2016: 1,720 ha in 2016, 3,900 ha in 2017, 6,690 ha in 2018, 7,792 ha in 2019, 2,459 ha in 2020, 1,050 ha in 2021, 5,373 ha in 2022, 3,427 ha in 2023, 3,012 ha in 2024, 729 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 14,119 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 11% of the area of London (170 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Gungu where it started
    16,633 ha reached on 22 May
    1.1 %
  2. 366 ha reached on 29 May
    0.0 %
  3. 160 ha reached on 22 May
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area47 ha
Residents≈ 5,600

Inside the perimeter there were about 47 hectares of built-up land and about 5,600 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
22 May 31.0 °C 51 % 35 km/h 0.2 mm Low 8
23 May 30.6 °C 53 % 26 km/h 0.1 mm Low 8
24 May 32.8 °C 35 % 33 km/h 0.0 mm Moderate 14
25 May 33.2 °C 33 % 36 km/h 0.0 mm Moderate 16
26 May 33.0 °C 34 % 34 km/h 0.0 mm Moderate 16
27 May 32.5 °C 33 % 32 km/h 0.0 mm Moderate 16
28 May 32.5 °C 30 % 33 km/h 0.0 mm Moderate 18
29 May 33.0 °C 30 % 31 km/h 0.0 mm Moderate 18
30 May 33.3 °C 28 % 32 km/h 0.0 mm Moderate 19
31 May 33.0 °C 27 % 30 km/h 0.0 mm Moderate 20
1 Jun 33.3 °C 26 % 35 km/h 0.0 mm High 22
2 Jun 33.1 °C 29 % 32 km/h 0.0 mm High 22
3 Jun 33.3 °C 30 % 27 km/h 0.0 mm Moderate 21
4 Jun 33.1 °C 24 % 18 km/h 0.0 mm High 22
5 Jun 33.7 °C 24 % 20 km/h 0.0 mm High 23
6 Jun 32.7 °C 31 % 23 km/h 0.0 mm High 23
7 Jun 32.6 °C 36 % 27 km/h 0.0 mm High 22
8 Jun 31.1 °C 42 % 27 km/h 0.0 mm Moderate 19
9 Jun 33.6 °C 27 % 37 km/h 0.0 mm High 27
10 Jun 32.8 °C 29 % 31 km/h 0.0 mm High 25
11 Jun 33.3 °C 33 % 24 km/h 0.0 mm High 25
12 Jun 32.6 °C 25 % 26 km/h 0.0 mm High 25
13 Jun 32.3 °C 22 % 30 km/h 0.0 mm High 28
14 Jun 32.5 °C 24 % 31 km/h 0.0 mm High 28
15 Jun 32.2 °C 29 % 23 km/h 0.0 mm High 27
16 Jun 30.9 °C 38 % 22 km/h 0.0 mm High 25
17 Jun 30.0 °C 49 % 24 km/h 0.3 mm Moderate 19
18 Jun 30.0 °C 46 % 22 km/h 0.1 mm Moderate 20
19 Jun 32.8 °C 38 % 24 km/h 0.0 mm Moderate 21
20 Jun 32.9 °C 40 % 30 km/h 0.0 mm High 23
21 Jun 32.9 °C 38 % 23 km/h 0.1 mm High 21
22 Jun 31.8 °C 34 % 25 km/h 0.0 mm High 25
23 Jun after 31.1 °C 37 % 23 km/h 0.1 mm High 24
24 Jun after 32.6 °C 28 % 30 km/h 0.0 mm High 28
25 Jun after 33.2 °C 20 % 30 km/h 0.0 mm High 32
26 Jun after 32.5 °C 24 % 23 km/h 0.0 mm High 31
27 Jun after 34.0 °C 26 % 26 km/h 0.0 mm High 32
28 Jun after 32.1 °C 32 % 24 km/h 0.0 mm High 30
29 Jun after 33.0 °C 27 % 24 km/h 0.0 mm High 31
30 Jun after 33.5 °C 23 % 24 km/h 0.0 mm High 32
1 Jul after 33.6 °C 23 % 24 km/h 0.0 mm High 32
2 Jul after 32.3 °C 32 % 24 km/h 0.0 mm High 31

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 15 May 2026
After · 29 Jun 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 7 June 2026 the air beside the fire reached 100 µg/m³ of PM2.5. That day averaged 64: 4.3 times the WHO daily guideline (15).

PM2.5 peak100 µg/m³
Days over the guideline23 days
PM10106 µg/m³
Optical depth0.96
262728293031123456789101112131415161718
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 467Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Democratic Republic of the Congo ›

Frequently asked questions

How long did the Gungu fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 22 May 2026 to 22 June 2026 (32 days). The perimeter dates it from 28 May 2026 to 15 June 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 17,034 hectares (170.3 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 3 municipalities: Gungu (16,633 ha, 1.1 %); Kahemba (366 ha, 0.0 %); Feshi (160 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 33.7 °C, humidity dropped to 22 % and gusts hit 37 km/h. The fire danger index (FWI) reached 28, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Democratic Republic of the Congo (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 15 June 2026 → 22 June 2026.
  2. Start date: 28 May 2026 → 22 May 2026.

RSS Changes to this page

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 28 May 2026 to 15 June 2026. 467 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology ›

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.