Skip to content
worldfires
ML · Mali · –

Guidimé fire, 26 October 2022 Guidimé, Soumpou

Out · last detection 2 Nov 2022, 02:07 UTC

The fire started on 26 October 2022 in Guidimé, Mali, and satellites saw it burning for 8 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 2,000 hectares from heat detections, spread across 2 municipalities.

It is the 164th largest in Kayes since 2016 (of 164 with a page). Number 67 in Mali in 2022, of 67.

Burnt area
2,000ha
GWIS perimeter (Copernicus)
Duration
8days
26 Oct 2022 – 2 Nov 2022
Municipalities hit
2
communes
Started on
26 Oct
2022
Heat detections
52
in a single hotspot: 36 MW
Danger at start
38
High · FWI index
Average daily power
96MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 26 Oct2 Nov
2 Nov 2022

How it evolved, day by day

29 Oct 2022 · 95 MW · 6 30 Oct 2022 · 292 MW · 22 31 Oct 2022 · 37 MW · 4 1 Nov 2022 · 33 MW · 12 2 Nov 2022 · 22 MW · 8
29 Oct 30 Oct 31 Oct 1 Nov 2 Nov

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

39°high
40km/h · peak gust
15%lowest humidity

It had gone 2 days without rain (1 mm or more) when it started.

This area had burned before

48% of the perimeter overlaps earlier fires recorded since 2016: 945 ha in 2016, 107 ha in 2017, 5 ha in 2018, 299 ha in 2020. Part of it burned more than once, so the yearly figures add up to more than the 961 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 1.3% of the area of London (20 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Guidimé where it started
    1,407 ha
    1.5 %
  2. 604 ha
    1.5 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
26 Oct 37.7 °C 22 % 28 km/h 0.0 mm High 38
27 Oct 39.4 °C 24 % 17 km/h 0.0 mm High 30
28 Oct 37.8 °C 31 % 22 km/h 0.0 mm High 31
29 Oct 37.2 °C 17 % 29 km/h 0.0 mm Very high 45
30 Oct 37.0 °C 20 % 30 km/h 0.0 mm Very high 46
31 Oct 37.0 °C 16 % 27 km/h 0.0 mm Very high 44
1 Nov 37.7 °C 16 % 40 km/h 0.0 mm Extreme 62
2 Nov 37.8 °C 15 % 35 km/h 0.0 mm Extreme 56
3 Nov after 37.3 °C 15 % 35 km/h 0.0 mm Extreme 59
4 Nov after 37.0 °C 14 % 32 km/h 0.0 mm Extreme 57
5 Nov after 37.3 °C 17 % 32 km/h 0.0 mm Extreme 57
6 Nov after 38.3 °C 19 % 28 km/h 0.0 mm Extreme 53
7 Nov after 38.8 °C 19 % 26 km/h 0.0 mm Very high 50
8 Nov after 37.7 °C 14 % 34 km/h 0.0 mm Extreme 63
9 Nov after 37.6 °C 12 % 34 km/h 0.0 mm Extreme 64
10 Nov after 36.2 °C 12 % 35 km/h 0.0 mm Extreme 69
11 Nov after 36.0 °C 15 % 28 km/h 0.0 mm Extreme 61
12 Nov after 36.0 °C 19 % 20 km/h 0.0 mm Very high 46

Its twins: fires that started in the same weather

It started with an FWI of 37.6, a minimum humidity of 22% and 2 days without rain. Fires in the area that started in weather like this since 2016: 15.

FWI at the start 37.6
Minimum humidity 22 %
Days without rain 2
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Fanga fire, October 2017
3,453 ha 9 days FWI 38.2 Min. humidity 22 % 36 km away, in 2017

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

7 days
median duration
3,167 ha
median area
0 %
went past 10,000 ha
1.5 mm
rain at the end (median; 1 of 15 had it)

It stayed below its twins: 2,000 ha against a median of 3,167 ha. It lasted 8 days, against 7 days.

In 14 of 15, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.5 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
40km/h · max. gust

It was considered over on 2 Nov, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 1 of 15, with a median of 1.5 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 19 Oct 2022
After · 9 Nov 2022

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 28 October 2022 the air beside the fire reached 245 µg/m³ of PM2.5. That day averaged 165: 11 times the WHO daily guideline (15).

PM2.5 peak245 µg/m³
Days over the guideline9 days
PM10409 µg/m³
Optical depth1.19
28 Oct30 Oct1 Nov3 Nov5 Nov
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 52Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Mali

Frequently asked questions

How long did the Guidimé fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 26 October 2022 to 2 November 2022 (8 days). The perimeter dates it from 30 October 2022 to 2 November 2022.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 2,000 hectares (20.0 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Guidimé (1,407 ha, 1.5 %); Soumpou (604 ha, 1.5 %).
What was the weather like?
During the fire the temperature reached 39.4 °C, humidity dropped to 15 % and gusts hit 40 km/h. The fire danger index (FWI) reached 62, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Mali (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 15. Their median duration was 7 days and their median area 3,167 ha; 0 % went past 10,000 ha. In 14 of 15, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.5 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Name: Soumpou → Guidimé.
  2. Start date: 30 October 2022 → 26 October 2022.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 30 October 2022 to 2 November 2022. 52 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.