Skip to content
worldfires
MX · Mexico · –

Guevea de Humboldt fire, May 2019 Guevea de Humboldt, San Juan Mazatlán, Santa María Guienagati

Out · last detection

The fire started on in Guevea de Humboldt, Mexico, and satellites saw it burning for 17 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 8,422 hectares from heat detections, spread across 5 municipalities.

It is number 8 by size of the 185 fires with a page that started in Oaxaca since 2016. Number 32 in Mexico in 2019, of 363.

Burnt area
8,422ha
GWIS perimeter (Copernicus)
Duration
17days
3 May 2019 – 19 May 2019
Municipalities hit
5
municipalities
Started on
3 May
2019
Heat detections
438
in a single hotspot: 0 MW
Danger at start
31
High · FWI index
Average daily power
210MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 3 May19 May
20 May 2019

How it evolved, day by day

3 May 2019 · 130 MW · 7 4 May 2019 · 94 MW · 15 6 May 2019 · 3 MW · 3 7 May 2019 · 32 MW · 8 8 May 2019 · 210 MW · 22 9 May 2019 · 666 MW · 80 10 May 2019 · 837 MW · 101 11 May 2019 · 399 MW · 53 12 May 2019 · 350 MW · 66 13 May 2019 · 244 MW · 40 14 May 2019 · 10 MW · 6 15 May 2019 · 182 MW · 8 17 May 2019 · 4 MW · 1 18 May 2019 · 129 MW · 11 19 May 2019 · 55 MW · 12 20 May 2019 · 21 MW · 5
3 May 10 May 17 May

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

36°high
77km/h · peak gust
27%lowest humidity

It had gone 6 days without rain (1 mm or more) when it started. Rain came after the fire: 1.8 mm on 24 May.

This area had burned before

40% of the perimeter overlaps earlier fires recorded since 2016: 3,395 ha in 2017.

How big is it?

10 km
It burned the equivalent of 5.3% of the area of London (84 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Guevea de Humboldt where it started
    4,112 ha
    15 %
  2. 3,525 ha
    2.2 %
  3. 648 ha
    1.7 %
  4. 232 ha
    0.7 %
  5. 230 ha
    0.5 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area1.4 ha
Residents≈ 200

Inside the perimeter there were about 1.4 hectares of built-up land and about 200 residents (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
3 May 34.1 °C 45 % 42 km/h 0.0 mm High 31
4 May 34.1 °C 43 % 60 km/h 0.0 mm Very high 41
5 May 33.4 °C 39 % 29 km/h 0.0 mm High 26
6 May 35.9 °C 34 % 44 km/h 0.0 mm High 36
7 May 36.1 °C 36 % 50 km/h 0.0 mm Very high 44
8 May 34.8 °C 34 % 66 km/h 0.0 mm Extreme 52
9 May 34.3 °C 36 % 77 km/h 0.0 mm Very extreme 71
10 May 33.7 °C 34 % 64 km/h 0.0 mm Extreme 59
11 May 35.0 °C 27 % 44 km/h 0.0 mm Very high 42
12 May 35.0 °C 33 % 49 km/h 0.0 mm Extreme 52
13 May 34.8 °C 31 % 46 km/h 0.0 mm Very high 47
14 May 34.6 °C 40 % 49 km/h 0.0 mm Very high 49
15 May 33.2 °C 52 % 36 km/h 1.1 mm High 32
16 May 32.1 °C 55 % 33 km/h 5.8 mm Moderate 17
17 May 34.3 °C 50 % 44 km/h 5.0 mm Low 6
18 May 34.2 °C 51 % 61 km/h 0.0 mm High 30
19 May 34.0 °C 46 % 51 km/h 0.0 mm High 35
20 May after 34.1 °C 47 % 37 km/h 0.5 mm High 22
21 May after 33.7 °C 52 % 64 km/h 0.0 mm Very high 41
22 May after 33.9 °C 47 % 56 km/h 0.0 mm Very high 42
23 May after 33.6 °C 49 % 36 km/h 0.6 mm High 25
24 May after 32.4 °C 56 % 54 km/h 1.8 mm Moderate 19

Its twins: fires that started in the same weather

It started with an FWI of 30.6, a minimum humidity of 45% and 6 days without rain. Fires in the area that started in weather like this since 2016: 41.

FWI at the start 30.6
Minimum humidity 45 %
Days without rain 6
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Cintalapa fire, March 2017
1,863 ha 12 days FWI 31.0 Min. humidity 45 % 141 km away, in 2017

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

9 days
median duration
2,547 ha
median area
100 %
went past 1,000 ha
2.4 mm
rain at the end (median; 36 of 41 had it)

It was 3.3 times larger than the median of its twins and lasted 17 days, against 9 days.

Only 1 of its 41 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 5 of 41, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.4 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.8 mmfirst rain
24 May5 days after it ended
77km/h · max. gust

It was considered over on 19 May, and on 24 May 1.8 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 36 of 41, with a median of 2.4 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 26 Apr 2019
After · 26 May 2019

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 0Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Mexico

Frequently asked questions

How long did the Guevea de Humboldt fire last?
GWIS (Copernicus) dates it between 3 May 2019 and 19 May 2019: 17 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 8,422 hectares (84.2 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 5 municipalities: Guevea de Humboldt (4,112 ha, 15 %); San Juan Mazatlán (3,525 ha, 2.2 %); Santa María Guienagati (648 ha, 1.7 %); Santo Domingo Petapa (232 ha, 0.7 %); Santiago Lachiguiri (230 ha, 0.5 %).
What was the weather like?
During the fire the temperature reached 36.1 °C, humidity dropped to 27 % and gusts hit 77 km/h. The fire danger index (FWI) reached 71, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Mexico (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 41. Their median duration was 9 days and their median area 2,547 ha; 100 % went past 1,000 ha. Only 1 of its 41 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 5 of 41, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.4 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · Emergency number and official warnings

Satellite cross-check

History of this page · 5 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Area: 8,701 → 8,422 ha.
  2. Last day with fire: 24 May 2019 → 19 May 2019.
  3. Start date: 30 April 2019 → 3 May 2019.
  4. Last day with fire: 19 May 2019 → 24 May 2019.
  5. Start date: 3 May 2019 → 30 April 2019.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. No Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.