Gualeguay fire, 2 September 2022 Gualeguay
The fire started on 2 September 2022 in Gualeguay, Argentina, and satellites saw it burning for 16 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 2,402 hectares from heat detections, spread across a single municipality.
It is the 102th largest in Buenos Aires since 2016 (of 210 with a page). Number 219 in Argentina in 2022, of 441.
Compare with…
- Burnt area
- 2,402ha
- GWIS perimeter (Copernicus)
- Duration
- 16days
- 2 Sept 2022 – 17 Sept 2022
- Municipalities hit
- 1
- departments
- Started on
- 2 Sept
- 2022
- Heat detections
- 179
- in a single hotspot: 135 MW
- Danger at start
- 24
- High · FWI index
- Average daily power
- 181MW
- detected power per day, on average
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone 11 days without rain (1 mm or more) when it started. Rain came after the fire: 1.8 mm on 18 Sept.
This area had burned before
96% of the perimeter overlaps earlier fires recorded since 2016: 2,298 ha in 2020, 2,309 ha in 2021. Part of it burned more than once, so the yearly figures add up to more than the 2,315 ha that had burned before.
- 709 ha Gualeguay fire, July 2021 1,984 ha in total; the hectares shown are those it shares with this fire
- 301 ha Gualeguay fire, September 2020 2,365 ha in total; the hectares shown are those it shares with this fire
- 271 ha Gualeguay fire, August 2020 29,172 ha in total; the hectares shown are those it shares with this fire
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
Berlin boundary: geoBoundaries · Federal Agency for Cartography and Geodesy (dl-de/by-2-0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
Gualeguay where it started2,416 ha reached on 2 Sept0.4 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
People and buildings inside the perimeter
GHSL 2020Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.
Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 8 Sept | 24.1 °C | 51 % | 56 km/h | 0.5 mm | High 24 |
| 9 Sept | 15.0 °C | 35 % | 52 km/h | 0.0 mm | High 22 |
| 10 Sept | 19.4 °C | 26 % | 21 km/h | 0.0 mm | Moderate 16 |
| 11 Sept | 18.4 °C | 31 % | 25 km/h | 0.0 mm | Moderate 18 |
| 12 Sept | 20.6 °C | 27 % | 19 km/h | 0.0 mm | Moderate 18 |
| 13 Sept | 22.3 °C | 35 % | 25 km/h | 0.0 mm | Moderate 20 |
| 14 Sept | 22.6 °C | 35 % | 21 km/h | 0.0 mm | Moderate 20 |
| 15 Sept | 23.0 °C | 32 % | 32 km/h | 0.0 mm | High 22 |
| 16 Sept | 24.5 °C | 36 % | 49 km/h | 0.0 mm | High 29 |
| 17 Sept | 26.6 °C | 34 % | 52 km/h | 0.0 mm | High 29 |
| 18 Sept after | 23.0 °C | 53 % | 35 km/h | 1.8 mm | Low 8 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · CopernicusOn 14 September 2022 the air beside the fire reached 120 µg/m³ of PM2.5. That day averaged 46: 3.1 times the WHO daily guideline (15).
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table · 179Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
- 23,596 haGualeguay29 July 2022 · 44 days · 6 km away
- 29,172 haGualeguay10 August 2020 · 21 days · 12 km away
- 14,934 haIslas del Ibicuy12 August 2020 · 18 days · 15 km away
- 9,567 haGualeguay2 September 2022 · 18 days · 22 km away
- 10,415 haGualeguay29 July 2022 · 29 days · 24 km away
- 7,983 haGualeguay11 August 2022 · 16 days · 26 km away
Frequently asked questions
- How long did the Gualeguay fire last?
- According to the heat detections seen by satellite inside the perimeter, it burned from 2 September 2022 to 17 September 2022 (16 days). The perimeter dates it from 8 September 2022 to 17 September 2022.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 2,402 hectares (24.0 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire only entered Gualeguay (2,416 ha, 0.4 %).
- What was the weather like?
- During the fire the temperature reached 26.6 °C, humidity dropped to 26 % and gusts hit 56 km/h. The fire danger index (FWI) reached 29, class High.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Argentina (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 911 · 100 · Emergency number and official warnings ›
Satellite cross-check
History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
- Start date: 8 September 2022 → 2 September 2022.
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
- Dates adjusted with the VIIRS detections inside the perimeter, which said 8 September 2022 to 17 September 2022. 179 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
- Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.