Skip to content
worldfires
ZA · South Africa · –

Greater Tzaneen fire, October 2022 Greater Tzaneen, Polokwane

Out · last detection 15 Oct 2022, 12:01 UTC

The fire started on 3 October 2022 in Greater Tzaneen, South Africa, and satellites saw it burning for 12 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 2,233 hectares from heat detections, spread across 2 municipalities.

It is the 130th largest in Limpopo since 2016 (of 161 with a page). Number 123 in South Africa in 2022, of 143.

Burnt area
2,233ha
GWIS perimeter (Copernicus)
Duration
12days
3 Oct 2022 – 14 Oct 2022
Municipalities hit
2
municipalities
Started on
3 Oct
2022
Heat detections
154
in a single hotspot: 0 MW
Danger at start
27
High · FWI index
Average daily power
406MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 3 Oct14 Oct
15 Oct 2022

How it evolved, day by day

3 Oct 2022 · 88 MW · 6 6 Oct 2022 · 1 MW · 1 7 Oct 2022 · 1,236 MW · 10 8 Oct 2022 · 437 MW · 19 9 Oct 2022 · 1,081 MW · 42 10 Oct 2022 · 1,319 MW · 41 11 Oct 2022 · 157 MW · 13 12 Oct 2022 · 81 MW · 8 13 Oct 2022 · 31 MW · 4 14 Oct 2022 · 26 MW · 9 15 Oct 2022 · 6 MW · 1
3 Oct 10 Oct 14 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

33°high
51km/h · peak gust
9%lowest humidity

It had gone 11 days without rain (1 mm or more) when it started. Rain came after the fire: 1.2 mm on 16 Oct.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 1.4% of the area of London (22 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Greater Tzaneen where it started
    2,213 ha
    0.8 %
  2. 30 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area1.2 ha
Residents≈ 70

Inside the perimeter there were about 1.2 hectares of built-up land and about 70 residents (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
3 Oct 31.8 °C 21 % 29 km/h 0.0 mm High 27
4 Oct 30.3 °C 28 % 50 km/h 0.0 mm High 34
5 Oct 24.7 °C 36 % 37 km/h 0.0 mm High 25
6 Oct 29.5 °C 22 % 39 km/h 0.0 mm High 29
7 Oct 30.0 °C 22 % 49 km/h 0.0 mm High 34
8 Oct 22.8 °C 40 % 43 km/h 0.0 mm High 25
9 Oct 32.9 °C 9 % 39 km/h 0.0 mm Very high 40
10 Oct 23.9 °C 28 % 51 km/h 0.0 mm High 35
11 Oct 24.9 °C 42 % 35 km/h 0.0 mm High 23
12 Oct 29.4 °C 23 % 38 km/h 0.0 mm High 30
13 Oct 28.6 °C 25 % 38 km/h 0.2 mm High 30
14 Oct 30.7 °C 21 % 36 km/h 0.0 mm High 33
15 Oct after 23.4 °C 43 % 49 km/h 0.0 mm High 29
16 Oct after 18.8 °C 59 % 40 km/h 1.2 mm Low 10

Its twins: fires that started in the same weather

It started with an FWI of 26.6, a minimum humidity of 21% and 11 days without rain. Fires in the area that started in weather like this since 2018: 3.

FWI at the start 26.6
Minimum humidity 21 %
Days without rain 11
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Lepele-Nkumpi fire, September 2018
3,980 ha 6 days FWI 28.5 Min. humidity 19 % 27 km away, in 2018

First rain (1 mm or more) after it ended: 7.7 mm on 8 Sept.

What happened to them

Fires in the area that started in similar weather: 3. With fewer than 15 we give no figures: they would be more noise than signal.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.2 mmfirst rain
16 Oct2 days after it ended
51km/h · max. gust

It was considered over on 14 Oct, and on 16 Oct 1.2 mm fell. We do not know whether the rain or the firefighters put it out.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2018.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 26 Sept 2022
After · 21 Oct 2022

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 11 October 2022 the air beside the fire reached 38 µg/m³ of PM2.5. That day averaged 21: 1.4 times the WHO daily guideline (15).

PM2.5 peak38 µg/m³
Days over the guideline7 days
PM1056 µg/m³
Optical depth0.51
1 Oct5 Oct9 Oct13 Oct17 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 0Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in South Africa

Frequently asked questions

How long did the Greater Tzaneen fire last?
GWIS (Copernicus) dates it between 3 October 2022 and 14 October 2022: 12 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 2,233 hectares (22.3 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Greater Tzaneen (2,213 ha, 0.8 %); Polokwane (30 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 32.9 °C, humidity dropped to 9 % and gusts hit 51 km/h. The fire danger index (FWI) reached 40, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of South Africa (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 10177 · 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 10177 · 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. No Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.