Skip to content
worldfires
AU · Australia · –

Goulburn Mulwaree fire, January 2020 Wingecarribee, Goulburn Mulwaree

Out · last detection 1 Feb 2020, 14:55 UTC

The fire started on 22 January 2020 in Goulburn Mulwaree, Australia, and satellites saw it burning for 11 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 8,176 hectares from heat detections, spread across 2 municipalities.

It is the 71th largest in New South Wales since 2016 (of 121 with a page). Number 33 in Australia in 2020, of 67.

Compare with…
Burnt area
8,176ha
GWIS perimeter (Copernicus)
Duration
11days
22 Jan 2020 – 1 Feb 2020
Municipalities hit
2
local government areas
Started on
22 Jan
2020
Heat detections
405
in a single hotspot: 269 MW
Danger at start
19
Moderate · FWI index
Average daily power
404MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 22 Jan1 Feb
1 Feb 2020

How it evolved, day by day

22 Jan 2020 · 16 MW · 3 23 Jan 2020 · 935 MW · 226 24 Jan 2020 · 1,131 MW · 58 25 Jan 2020 · 11 MW · 4 26 Jan 2020 · 1,558 MW · 52 27 Jan 2020 · 80 MW · 5 29 Jan 2020 · 11 MW · 8 30 Jan 2020 · 63 MW · 11 31 Jan 2020 · 85 MW · 22 1 Feb 2020 · 146 MW · 16
22 Jan 24 Jan 26 Jan 29 Jan 31 Jan

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

41°high
95km/h · peak gust
13%lowest humidity

It had gone one day without rain (1 mm or more) when it started. Rain came after the fire: 2.9 mm on 2 Feb.

This area had burned before

43% of the perimeter overlaps earlier fires recorded since 2016: 3,576 ha in 2019.

How big is it?

10 km
It burned the equivalent of 5.2% of the area of London (82 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. 7,597 ha
    2.8 %
  2. Goulburn Mulwaree where it started
    617 ha
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area5.5 ha
Residents≈ 150

Inside the perimeter there were about 5.5 hectares of built-up land and about 150 residents (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
22 Jan 33.3 °C 17 % 38 km/h 0.0 mm Moderate 19
23 Jan 37.1 °C 13 % 95 km/h 0.4 mm Extreme 63
24 Jan 29.2 °C 31 % 46 km/h 0.4 mm Moderate 21
25 Jan 30.3 °C 42 % 49 km/h 2.6 mm Low 7
26 Jan 34.0 °C 18 % 44 km/h 0.7 mm High 30
27 Jan 33.2 °C 33 % 35 km/h 0.3 mm Moderate 17
28 Jan 34.5 °C 21 % 45 km/h 0.7 mm High 27
29 Jan 29.7 °C 39 % 42 km/h 0.0 mm High 21
30 Jan 34.5 °C 25 % 34 km/h 0.0 mm High 26
31 Jan 39.8 °C 24 % 32 km/h 0.0 mm High 29
1 Feb 41.1 °C 21 % 50 km/h 0.0 mm Extreme 51
2 Feb after 33.7 °C 41 % 50 km/h 2.9 mm High 37

Its twins: fires that started in the same weather

It started with an FWI of 19.3, a minimum humidity of 17% and 1 day without rain. Fires in the area that started in weather like this since 2018: 3.

FWI at the start 19.3
Minimum humidity 17 %
Days without rain 1
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Shoalhaven fire, November 2019
151,942 ha 46 days FWI 17.9 Min. humidity 27 % 76 km away, in 2019

First rain (1 mm or more) after it ended: 2.9 mm on 11 Jan.

What happened to them

Fires in the area that started in similar weather: 3. With fewer than 15 we give no figures: they would be more noise than signal.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

2.9 mmfirst rain
2 Febthe day after it ended
95km/h · max. gust

It was considered over on 1 Feb, and on 2 Feb 2.9 mm fell. We do not know whether the rain or the firefighters put it out.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2018.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 15 Jan 2020
After · 8 Feb 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 405Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Goulburn Mulwaree fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 22 January 2020 to 1 February 2020 (11 days). The perimeter dates it from 22 January 2020 to 27 January 2020.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 8,176 hectares (81.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Wingecarribee (7,597 ha, 2.8 %); Goulburn Mulwaree (617 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 41.1 °C, humidity dropped to 13 % and gusts hit 95 km/h. The fire danger index (FWI) reached 63, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Name: Wingecarribee → Goulburn Mulwaree.
  2. Last day with fire: 27 January 2020 → 1 February 2020.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 22 January 2020 to 27 January 2020. 405 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.