Skip to content
worldfires
ET · Ethiopia · –

Gida Ayana fire, 20 March 2020 Gida Ayana, Kiremu

Out · last detection

The fire started on in Gida Ayana, Ethiopia, and satellites saw it burning for 14 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 2,841 hectares from heat detections, spread across 2 municipalities.

It is number 106 by size of the 223 fires with a page that started in Oromia since 2016. Number 87 in Ethiopia in 2020, of 177.

Compare with…
Burnt area
2,841ha
GWIS perimeter (Copernicus)
Duration
14days
20 Mar 2020 – 2 Apr 2020
Municipalities hit
2
districts
Started on
20 Mar
2020
Heat detections
108
in a single hotspot: 45 MW
Danger at start
47
Very high · FWI index
Average daily power
65MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 20 Mar2 Apr
2 Apr 2020

How it evolved, day by day

20 Mar 2020 · 5 MW · 5 21 Mar 2020 · 8 MW · 6 22 Mar 2020 · 93 MW · 21 23 Mar 2020 · 100 MW · 13 25 Mar 2020 · 241 MW · 19 26 Mar 2020 · 33 MW · 8 27 Mar 2020 · 52 MW · 6 30 Mar 2020 · 14 MW · 6 31 Mar 2020 · 89 MW · 22 2 Apr 2020 · 15 MW · 2
20 Mar 22 Mar 25 Mar 27 Mar 31 Mar

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

39°high
44km/h · peak gust
2%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started. Rain came after the fire: 1.5 mm on 10 Apr.

This area had burned before

83% of the perimeter overlaps earlier fires recorded since 2016: 2,270 ha in 2016, 213 ha in 2017, 480 ha in 2018, 1,443 ha in 2019. Part of it burned more than once, so the yearly figures add up to more than the 2,354 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 1.8% of the area of London (28 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Gida Ayana where it started
    2,630 ha reached on 20 Mar
    1.5 %
  2. 232 ha reached on 30 Mar
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents≈ 30

Inside the perimeter there were about 0.08 hectares of built-up land and about 30 residents (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Very dry air: 26 % of the area in Ethiopia 60 days without rain: 37 % of the area in Ethiopia

Day High Min. humidity Peak gust Rain Danger (FWI)
20 Mar 35.3 °C 11 % 25 km/h 0.0 mm Very high 47
21 Mar 35.1 °C 15 % 28 km/h 0.0 mm Very high 47
22 Mar 35.2 °C 12 % 44 km/h 0.0 mm Very high 50
23 Mar 35.5 °C 11 % 39 km/h 0.0 mm Extreme 54
24 Mar 35.6 °C 9 % 41 km/h 0.0 mm Extreme 59
25 Mar 34.7 °C 7 % 44 km/h 0.0 mm Extreme 69
26 Mar 36.8 °C 2 % 33 km/h 0.0 mm Extreme 58
27 Mar 38.0 °C 3 % 31 km/h 0.0 mm Extreme 60
28 Mar 38.1 °C 7 % 37 km/h 0.0 mm Extreme 66
29 Mar 37.3 °C 13 % 35 km/h 0.0 mm Extreme 62
30 Mar 37.5 °C 9 % 32 km/h 0.0 mm Extreme 54
31 Mar 38.8 °C 10 % 36 km/h 0.0 mm Extreme 51
1 Apr 39.1 °C 11 % 22 km/h 0.0 mm Very high 50
2 Apr 37.6 °C 11 % 38 km/h 0.0 mm Extreme 57
3 Apr after 37.9 °C 17 % 25 km/h 0.0 mm Extreme 52
4 Apr after 35.9 °C 19 % 25 km/h 0.1 mm Very high 49
5 Apr after 37.8 °C 10 % 25 km/h 0.0 mm Extreme 51
6 Apr after 37.6 °C 14 % 32 km/h 0.0 mm Extreme 50
7 Apr after 37.4 °C 18 % 34 km/h 0.0 mm Extreme 57
8 Apr after 37.5 °C 17 % 26 km/h 0.0 mm Extreme 51
9 Apr after 37.2 °C 21 % 33 km/h 0.0 mm Extreme 54
10 Apr after 33.5 °C 30 % 31 km/h 1.5 mm Very high 43

Its twins: fires that started in the same weather

It started with an FWI of 47.0, a minimum humidity of 11% and more than two months without rain. Fires in the area that started in weather like this since 2016: 30.

FWI at the start 47.0
Minimum humidity 11 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Dibat fire, March 2019
4,965 ha 4 days FWI 47.5 Min. humidity 11 % 63 km away, in 2019

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

7 days
median duration
2,960 ha
median area
100 %
went past 1,000 ha
—
rain at the end (median; 0 of 30 had it)

It burned an area similar to its twins (2,841 ha against a median of 2,960 ha) and lasted 14 days, against 7 days.

In none of them did 1 mm fall in the ten days after the end: they all went out without rain.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.5 mmfirst rain
10 Apr8 days after it ended
44km/h · max. gust

It was considered over on 2 Apr, and on 10 Apr 1.5 mm fell. We do not know whether the rain or the firefighters put it out. None of its 30 twins had rain when they ended.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 13 Mar 2020
After · 9 Apr 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 108Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Ethiopia

Frequently asked questions

How long did the Gida Ayana fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 20 March 2020 to 2 April 2020 (14 days). The perimeter dates it from 20 March 2020 to 27 March 2020.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 2,841 hectares (28.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Gida Ayana (2,630 ha, 1.5 %); Kiremu (232 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 39.1 °C, humidity dropped to 2 % and gusts hit 44 km/h. The fire danger index (FWI) reached 69, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Ethiopia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 30. Their median duration was 7 days and their median area 2,960 ha; 100 % went past 1,000 ha. In none of them did 1 mm fall in the ten days after the end: they all went out without rain.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 27 March 2020 → 2 April 2020.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 20 March 2020 to 27 March 2020. 108 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.