Burned area
satellite only201ha
Perimeter published by EFFIS (Copernicus).
- Source
- EFFIS (Copernicus)
- Date
- perimeter revised on 26 January 2022
+− cross-check
No official record is matched to this page to compare it with.
TR · Türkiye ·
Gelibolu fire, September 2020 Gelibolu
Out · last detection 15 Sept 2020, 11:28 UTC
The fire started on 15 September 2020 in Gelibolu, Türkiye, and satellites saw it burning for 1 day. Copernicus mapped a burnt perimeter of 201 hectares from satellite imagery, spread across a single municipality.
Number 115 in Türkiye in 2020, of 212.
Use this data
Compare with…
Suggestions: Urla · 2021Çeşme · 2020Gelibolu · 2025Şarköy · 2025
Use this data
Fire page data · version 2026-10-24matches the official recordwith caveatssatellite onlymodel
When copying, the sentence is
Tick the figures you want: they make up the lede and the CSV.
Duration by satellite
satellite only1day
15 Sept 2020 to 15 Sept 2020: first and last day with fire on the page.
- Source
- EFFIS (Copernicus) · NASA FIRMS · VIIRS
- Date
- last detection: 15 Sept 2020, 11:28 UTC
+− cross-check
Satellites pass a few times a day and cloud or smoke can hide the fire: a lack of detections is not an official extinction. Each country’s emergency service declares a fire contained or out.
Start
satellite only15 Sept 2020
First day with fire seen by the satellites or the perimeter.
- Source
- EFFIS (Copernicus) · NASA FIRMS · VIIRS
- Date
- 15 Sept 2020
+− cross-check
No official record is matched to this page, so the alert time and the cause are not known here.
Hotspots
satellite only1
VIIRS detections at 375 m. Most intense hotspot: 65 MW.
- Source
- NASA FIRMS · VIIRS (Suomi NPP)
- Date
- 15 Sept 2020 – 15 Sept 2020
+− cross-check
There is no official record to compare with. Each hotspot is a pixel detected in one satellite pass, not a separate fire.
The worst day
satellite only65MW
Total radiative power on 15 September 2020; hotspots that day: 1.
- Source
- NASA FIRMS · VIIRS (FRP)
- Date
- 15 Sept 2020
+− cross-check
Fire radiative power (FRP) measures the energy the fire gives off when the satellite passes. Added up by day, it compares intensity, not area.
Danger at the start
model50.1FWI · extreme
Fire Weather Index (Canadian system) computed by WorldFires for the day the fire started. Consecutive days without rain before: 60.
- Source
- WorldFires calculation (Canadian FWI system)
- Date
- 15 Sept 2020, local noon
- Model
- ERA5 0,25° (ECMWF · Copernicus C3S) · Open-Meteo.com
+− cross-check
This is an index computed from weather model data, not a measurement of the fire nor an official warning. Danger warnings are issued by each country’s authority. Emergency number and official warnings
Weather during the fire
model27.8°C · 47% RH
High of 27.8 °C and minimum humidity of 47% on 15 September 2020; gusts of 49 km/h on 15 September 2020.
- Source
- weather model at the fire’s grid cell
- Date
- 15 Sept 2020 – 15 Sept 2020
- Model
- ERA5 0,25° (ECMWF · Copernicus C3S) · Open-Meteo.com
+− cross-check
These are model values for a cell of about 25 km, not from a weather station: they may differ from what was measured on the ground.
This page’s change log has been kept since 24 October 2026: every night what it publishes is compared and the difference is logged. Anything earlier is reconstructed from each source’s date and marked as reconstructed.
Show
-
· reconstructed weatherWeather and FWI computed from the ERA5 reanalysis
-
· reconstructed perimeterEFFIS (Copernicus) revises the perimeter
What was saved on 24 October 2026
Every night a snapshot of what the page shows is saved. If anything changes, it appears in the list as a log entry.
- Area
- 201 ha
- Dates
- 15 Sept 2020 – 15 Sept 2020
- Name
- Gelibolu
- Official record
- —
Versioned permanent link
https://worldfires.org/en/fire/gelibolu-2020-09?v=2026-10-24A version keeps the area, dates, name and official record; the area as it was logged (changes under 2% are not logged). The map, hotspots and weather always show today’s data.
Citation
A lede of about 60 words figures only, no adjectives
CSV for this fire gelibolu-2020-09.csv · daily, no individual hotspots
| fecha | focos_viirs | frp_mw | tmax_c | tmin_c | hr_min_pct | viento_max_kmh | racha_max_kmh | precip_mm | fwi | clase_fwi | dentro_del_incendio |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2020-09-15 | 1 | 65 | 27.8 | 22.2 | 47 | 30.8 | 49.3 | 0 | 50.1 | extremo | 1 |
| 2020-09-16 | 0 | 0 | 26.4 | 21.3 | 58 | 30.8 | 49.7 | 0 | 48.3 | muy_alto | 0 |
| 2020-09-17 | 0 | 0 | 26.1 | 20.3 | 59 | 19.7 | 31.7 | 0 | 31.1 | alto | 0 |
| 2020-09-18 | 0 | 0 | 25.9 | 20.7 | 62 | 26.2 | 42.5 | 0 | 31 | alto | 0 |
| 2020-09-19 | 0 | 0 | 23.9 | 18.9 | 55 | 33.9 | 54.4 | 0 | 47.2 | muy_alto | 0 |
| 2020-09-20 | 0 | 0 | 22.1 | 17.5 | 56 | 27.3 | 45.7 | 0 | 37.6 | alto | 0 |
| 2020-09-21 | 0 | 0 | 24.4 | 19.9 | 55 | 26.5 | 42.8 | 0 | 36.1 | alto | 0 |
| 2020-09-22 | 0 | 0 | 24.3 | 19 | 55 | 21.9 | 35.6 | 0 | 31 | alto | 0 |
| 2020-09-23 | 0 | 0 | 24.9 | 18.2 | 59 | 10.8 | 21.2 | 0 | 20 | moderado | 0 |
| 2020-09-24 | 0 | 0 | 26.1 | 19.6 | 52 | 9.3 | 22.3 | 0 | 19.3 | moderado | 0 |
| 2020-09-25 | 0 | 0 | 26.2 | 19.2 | 56 | 18.1 | 29.9 | 0 | 16.6 | moderado | 0 |
It is generated in your browser from this page’s data: one file per fire, aggregated by day and without individual hotspots.
Live widget for your story
It updates itself while the fire is still active and links to this page. Free, with the attribution shown at the bottom.
Sources for this page: EFFIS (Copernicus), NASA FIRMS (VIIRS), ERA5 (ECMWF/Copernicus C3S) · Open-Meteo.com (CC BY 4.0). Open-Meteo.com · How we build fire pages: methodology
- Burnt area
- 201ha
- Copernicus perimeter
- Duration
- 1day
- 15 Sept 2020 – 15 Sept 2020
- Municipalities hit
- 1
- districts
- Started on
- 15 Sept
- 2020
- Heat detections
- 1
- in a single hotspot: 65 MW
- Danger at start
- 50
- Extreme · FWI index
- Average daily power
- 65MW
- detected power per day, on average
Where it burned
HOTSPOTS BY DAY
15 Sept15 Sept
How it evolved, day by day
15 Sept 2020 · 65 MW · 1
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
28°high
49km/h · peak gust
47%lowest humidity
It had gone more than two months without rain (1 mm or more) when it started.
This area had burned before
No earlier perimeters overlap this fire since 2016, when the satellite record begins.
What happened to each town
-
202 ha reached on 15 Sept0.2 %
Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
What burned
- Scrub and transitional woodland82 %
- Coniferous forest14 %
- Agricultural areas3.4 %
Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
Started with Extreme FWI: 61 % of the area in Türkiye 60 days without rain: 10 % of the area in Türkiye
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 15 Sept | 27.8 °C | 47 % | 49 km/h | 0.0 mm | Extreme 50 |
| 16 Sept after | 26.4 °C | 58 % | 50 km/h | 0.0 mm | Very high 48 |
| 17 Sept after | 26.1 °C | 59 % | 32 km/h | 0.0 mm | High 31 |
| 18 Sept after | 25.9 °C | 62 % | 42 km/h | 0.0 mm | High 31 |
| 19 Sept after | 23.9 °C | 55 % | 54 km/h | 0.0 mm | Very high 47 |
| 20 Sept after | 22.1 °C | 56 % | 46 km/h | 0.0 mm | High 38 |
| 21 Sept after | 24.4 °C | 55 % | 43 km/h | 0.0 mm | High 36 |
| 22 Sept after | 24.3 °C | 55 % | 36 km/h | 0.0 mm | High 31 |
| 23 Sept after | 24.9 °C | 59 % | 21 km/h | 0.0 mm | Moderate 20 |
| 24 Sept after | 26.1 °C | 52 % | 22 km/h | 0.0 mm | Moderate 19 |
| 25 Sept after | 26.2 °C | 56 % | 30 km/h | 0.0 mm | Moderate 17 |
Its twins: fires that started in the same weather
It started with an FWI of 50.1, a minimum humidity of 47% and more than two months without rain. Fires in the area that started in weather like this since 2016: 9.
FWI at the start
50.1
Minimum humidity
47 %
Days without rain
60+
this fire
chosen twins
rest of the area
Almost identicalSimilar
Outlines of the closest twins
This fire · Gelibolu fire, September 2020
201 ha
1 day
FWI 50.1
Min. humidity 47 %
Urla fire, August 2021
184 ha
1 day
FWI 49.3
Min. humidity 46 %
242 km away, in 2021
First rain (1 mm or more) after it ended: none in the following ten days.
Çeşme fire, August 2020
1,609 ha
2 days
FWI 49.0
Min. humidity 45 %
242 km away, in 2020
First rain (1 mm or more) after it ended: none in the following ten days.
Bayramiç fire, August 2025
2,864 ha
2 days
FWI 63.4
Min. humidity 45 %
85 km away, in 2025
First rain (1 mm or more) after it ended: none in the following ten days.
Aliağa fire, August 2023
122 ha
1 day
FWI 44.3
Min. humidity 42 %
193 km away, in 2023
First rain (1 mm or more) after it ended: none in the following ten days.
Chios fire, August 2025
7,914 ha
5 days
FWI 49.1
Min. humidity 37 %
242 km away, in 2025
First rain (1 mm or more) after it ended: none in the following ten days.
What happened to them
Fires in the area that started in similar weather: 9. With fewer than 15 we give no figures: they would be more noise than signal.
This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it
How it ended
—first rain
—no rain in ten days
49km/h · max. gust
It was considered over on 15 Sept, and not even 1 mm fell in the following ten days: it went out without rain.
Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
How a twin is chosen
- Same area: fires that have already ended, less than 250 km from this one, since 2016.
- Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
- Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
- Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
- They are sorted by similarity, and the outlines of the first five are drawn.
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
↔
Before · 8 Sept 2020
After · 22 Sept 2020
Sentinel-2 did not pass over on that day. Try another date, or use false colour, which is daily.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · CopernicusOn 15 September 2020 the air beside the fire reached 16 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).
PM2.5 peak16 µg/m³
Days over the guideline0 days
PM1034 µg/m³
WHO 15
13 Sept15 Sept17 Sept
Good
Fair
Moderate
Poor
Very poor
Extremely poor
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table · 1Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV
Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
Frequently asked questions
- How long did the Gelibolu fire last?
- Copernicus dates it between 15 September 2020 and 15 September 2020: 1 day between the first and last image with fire.
- How much area did it burn?
- The perimeter Copernicus measured from satellite imagery is 201 hectares (2.0 km²). Official national figures may differ.
- Which municipalities burned?
- The fire only entered Gelibolu (202 ha, 0.2 %).
- Did the fire reach a town?
- The fire started in Gelibolu and came within 22.1 km of its centre. That is the distance from the perimeter, or the nearest hotspot, to the point marking the centre; it does not mean it entered the houses.
- What was the weather like?
- During the fire the temperature reached 27.8 °C, humidity dropped to 47 % and gusts hit 49 km/h. The fire danger index (FWI) reached 50, class Extreme.
- Where does this data come from?
- From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Türkiye (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 112 · Emergency number and official warnings
Satellite cross-check
History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
No changes since 24 October 2026.
RSS Changes to this page With cross-checks and a citable version
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
- Dates from the perimeter: the VIIRS detections inside it did not change them. One Suomi-NPP VIIRS detection on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
Where this data comes from
The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.