Gabriel Zamora fire, May 2022
Gabriel Zamora, Uruapan
Out · last detection
The fire started on in Gabriel Zamora, Mexico, and satellites saw it burning for 15 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,840 hectares from heat detections, spread across 2 municipalities. According to CONAFOR, the largest of the 3 recorded fires was detected on 9 May 2022 and declared extinguished on 10 May 2022.
It is number 14 by size of the 106 fires with a page that started in Michoacan de Ocampo since 2016. Number 48 in Mexico in 2022, of 232.
This is an index computed from weather model data, not a measurement of the fire nor an official warning. Danger warnings are issued by each country’s authority. Emergency number and official warnings ›
Weather during the fire
model
32.1°C · 27% RH
High of 32.1 °C and minimum humidity of 27% on 10 May 2022; gusts of 48 km/h on 12 May 2022.
These are model values for a cell of about 25 km, not from a weather station: they may differ from what was measured on the ground.
Living inside
model
≈ 40people
Estimated residents inside the perimeter and 0.72 ha of built-up area (100 m grid, epoch 2020).
Source
GHSL R2023A · JRC
Date
calculated on 24 October 2026
+− cross-check
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.
ⓘThis page’s change log has been kept since 24 October 2026: every night what it publishes is compared and the difference is logged. Anything earlier is reconstructed from each source’s date and marked as reconstructed.
Show
· reconstructedofficial
Matched with the official CONAFOR record
Matches: 3,267 ha in the official record (records: 3).
A version keeps the area, dates, name and official record; the area as it was logged (changes under 2% are not logged). The map, hotspots and weather always show today’s data.
Citation
A lede of about 60 words figures only, no adjectives
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
People and buildings inside the perimeter
GHSL 2020
Built-up area0.72ha
Residents≈ 40
Inside the perimeter there were about 0.72 hectares of built-up land and about 40 residents (GHSL 2020, satellite-based estimate).
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.
According to CONAFOR, 3 fires started inside this perimeter on these dates, totalling 3,267 ha (the satellite measured 3,840 ha).
CONAFOR records each fire that started at a different time or place separately; the satellite sees a single burned area, so this page groups them together. The numbers on the map show where each one started.
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
It started with an FWI of 39.5, a minimum humidity of 37% and more than two months without rain. Fires in the area that started in weather like this since 2016: 30.
FWI at the start39.5
Minimum humidity37 %
Days without rain60+
this firechosen twinsrest of the area
Almost identicalSimilar
Outlines of the closest twins
This fire · Gabriel Zamora fire, May 2022
3,840 ha15 daysFWI 39.5Min. humidity 37 %
Técpan de Galeana fire, April 2018
1,977 ha5 daysFWI 39.4Min. humidity 38 %241 km away, in 2018
First rain (1 mm or more) after it ended: 1.2 mm on 7 May.
It was 1.6 times larger than the median of its twins and lasted 15 days, against 13 days.
Only 9 of its 30 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 17 of 30, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.6 mm.
This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it
How it ended
1.2 mmfirst rain
29 May9 days after it ended
48km/h · max. gust
It was considered over on 20 May, and on 29 May 1.2 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 13 of 30, with a median of 1.6 mm.
Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
How a twin is chosen
Same area: fires that have already ended, less than 250 km from this one, since 2016.
Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
They are sorted by similarity, and the outlines of the first five are drawn.
GWIS (Copernicus) dates it between 6 May 2022 and 20 May 2022: 15 days between the first and last heat detection of the perimeter. According to CONAFOR, the largest of the 3 recorded fires was detected on 9 May 2022 and declared extinguished on 10 May 2022.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,840 hectares (38.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Gabriel Zamora (2,699 ha, 7.3 %); Uruapan (1,162 ha, 1.1 %).
What was the weather like?
During the fire the temperature reached 32.1 °C, humidity dropped to 27 % and gusts hit 48 km/h. The fire danger index (FWI) reached 43, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Mexico (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 30. Their median duration was 13 days and their median area 2,345 ha; 100 % went past 1,000 ha. Only 9 of its 30 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 17 of 30, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.6 mm.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
⚑Report an errorHow we know this›
Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
Dates from the perimeter: the VIIRS detections inside it did not change them. 233 Suomi-NPP VIIRS detections on those dates.
Compared with CONAFOR: 3,267 official ha against 3,840 ha of perimeter; they agree within 25%.
Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.