Skip to content
worldfires
PY · Paraguay · –

Fuerte Olimpo fire, 16 July 2020 Fuerte Olimpo, Bahía Negra

Out · last detection 20 Jul 2020, 17:24 UTC

The fire started on 16 July 2020 in Fuerte Olimpo, Paraguay, and satellites saw it burning for 5 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,398 hectares from heat detections, spread across 2 municipalities.

It is the 84th largest in ALTO PARAGUAY since 2016 (of 383 with a page). Number 119 in Paraguay in 2020, of 422.

Burnt area
3,398ha
GWIS perimeter (Copernicus)
Duration
5days
16 Jul 2020 – 20 Jul 2020
Municipalities hit
2
districts
Started on
16 Jul
2020
Heat detections
139
in a single hotspot: 274 MW
Danger at start
20
Moderate · FWI index
Average daily power
617MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 16 Jul20 Jul
20 Jul 2020

How it evolved, day by day

16 Jul 2020 · 490 MW · 29 17 Jul 2020 · 1,861 MW · 48 18 Jul 2020 · 671 MW · 55 19 Jul 2020 · 13 MW · 5 20 Jul 2020 · 47 MW · 2
16 Jul 17 Jul 18 Jul 19 Jul 20 Jul

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

35°high
50km/h · peak gust
21%lowest humidity

It had gone 7 days without rain (1 mm or more) when it started.

This area had burned before

43% of the perimeter overlaps earlier fires recorded since 2016: 65 ha in 2016, 1,458 ha in 2019.

How big is it?

10 km
It burned the equivalent of 2.1% of the area of London (34 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Fuerte Olimpo where it started
    3,412 ha reached on 16 Jul
    0.2 %
  2. 0 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
16 Jul 33.6 °C 34 % 31 km/h 0.0 mm Moderate 20
17 Jul 34.5 °C 21 % 39 km/h 0.0 mm High 31
18 Jul 35.0 °C 25 % 50 km/h 0.0 mm Very high 42
19 Jul 34.4 °C 27 % 49 km/h 0.0 mm Very high 44
20 Jul 33.6 °C 26 % 48 km/h 0.0 mm Very high 43
21 Jul after 33.3 °C 28 % 49 km/h 0.0 mm Very high 45
22 Jul after 34.4 °C 24 % 46 km/h 0.0 mm Very high 42
23 Jul after 34.5 °C 25 % 46 km/h 0.0 mm Very high 41
24 Jul after 31.4 °C 31 % 52 km/h 0.0 mm High 24
25 Jul after 16.6 °C 56 % 56 km/h 0.0 mm Moderate 21
26 Jul after 24.8 °C 43 % 16 km/h 0.0 mm Moderate 13
27 Jul after 33.2 °C 28 % 42 km/h 0.0 mm High 34
28 Jul after 31.3 °C 38 % 42 km/h 0.0 mm High 31
29 Jul after 19.4 °C 39 % 40 km/h 0.0 mm High 28
30 Jul after 24.7 °C 36 % 23 km/h 0.0 mm Moderate 16

Its twins: fires that started in the same weather

It started with an FWI of 19.8, a minimum humidity of 34% and 7 days without rain. Fires in the area that started in weather like this since 2016: 30.

FWI at the start 19.8
Minimum humidity 34 %
Days without rain 7
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Corumbá fire, September 2016
10,435 ha 8 days FWI 18.0 Min. humidity 34 % 82 km away, in 2016

First rain (1 mm or more) after it ended: 9.8 mm on 4 Oct.

What happened to them

6 days
median duration
4,427 ha
median area
20 %
went past 10,000 ha
7.6 mm
rain at the end (median; 24 of 30 had it)

It burned an area similar to its twins (3,398 ha against a median of 4,427 ha) and lasted 5 days, against 6 days.

In 6 of 30, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 7.6 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
50km/h · max. gust

It was considered over on 20 Jul, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 24 of 30, with a median of 7.6 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 9 Jul 2020
After · 27 Jul 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 139Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Paraguay

Frequently asked questions

How long did the Fuerte Olimpo fire last?
GWIS (Copernicus) dates it between 16 July 2020 and 20 July 2020: 5 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,398 hectares (34.0 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Fuerte Olimpo (3,412 ha, 0.2 %); Bahía Negra (0 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 35.0 °C, humidity dropped to 21 % and gusts hit 50 km/h. The fire danger index (FWI) reached 44, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Paraguay (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 30. Their median duration was 6 days and their median area 4,427 ha; 20 % went past 10,000 ha. In 6 of 30, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 7.6 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 132 · 911 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 132 · 911.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 139 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.