Fouli fire, October 2021 Fouli, Kaya
The fire started on 23 October 2021 in Fouli, Chad, and satellites saw it burning for 6 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 6,311 hectares from heat detections, spread across 2 municipalities.
It is the 7th largest in Lac since 2016 (of 44 with a page). Number 14 in Chad in 2021, of 197.
Compare with…
Suggestions: Kaya · 2016Kaya · 2018Fouli · 2017Fouli · 2019
- Burnt area
- 6,311ha
- GWIS perimeter (Copernicus)
- Duration
- 6days
- 23 Oct 2021 – 28 Oct 2021
- Municipalities hit
- 2
- departments
- Started on
- 23 Oct
- 2021
- Heat detections
- 199
- in a single hotspot: 64 MW
- Danger at start
- 56
- Extreme · FWI index
- Average daily power
- 556MW
- detected power per day, on average
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone 5 days without rain (1 mm or more) when it started.
This area had burned before
100% of the perimeter overlaps earlier fires recorded since 2016: 5,497 ha in 2016, 5,515 ha in 2017, 4,547 ha in 2018, 1,751 ha in 2019. Part of it burned more than once, so the yearly figures add up to more than the 6,333 ha that had burned before.
- 5,497 ha Kaya fire, September 2016 57,635 ha in total; the hectares shown are those it shares with this fire
- 4,547 ha Kaya fire, October 2018 23,249 ha in total; the hectares shown are those it shares with this fire
- 3,152 ha Fouli fire, October 2017 42,926 ha in total; the hectares shown are those it shares with this fire
- 1,751 ha Fouli fire, October 2019 2,567 ha in total; the hectares shown are those it shares with this fire
- 1,645 ha Fouli fire, October 2017 4,876 ha in total; the hectares shown are those it shares with this fire
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
Berlin boundary: geoBoundaries · Federal Agency for Cartography and Geodesy (dl-de/by-2-0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
Fouli where it started5,984 ha reached on 23 Oct0.8 %
-
356 ha reached on 25 Oct0.1 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
People and buildings inside the perimeter
GHSL 2020Inside the perimeter there were about 3.7 hectares of built-up land and about 650 residents (GHSL 2020, satellite-based estimate).
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.
Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 23 Oct | 40.2 °C | 6 % | 36 km/h | 0.0 mm | Extreme 56 |
| 24 Oct | 42.2 °C | 5 % | 38 km/h | 0.0 mm | Extreme 61 |
| 25 Oct | 41.2 °C | 6 % | 42 km/h | 0.0 mm | Extreme 66 |
| 26 Oct | 40.3 °C | 6 % | 40 km/h | 0.0 mm | Extreme 66 |
| 27 Oct | 39.8 °C | 6 % | 35 km/h | 0.0 mm | Extreme 63 |
| 28 Oct | 40.3 °C | 5 % | 35 km/h | 0.0 mm | Extreme 63 |
| 29 Oct after | 40.7 °C | 6 % | 38 km/h | 0.0 mm | Extreme 65 |
| 30 Oct after | 40.6 °C | 7 % | 42 km/h | 0.0 mm | Very extreme 73 |
| 31 Oct after | 40.7 °C | 5 % | 47 km/h | 0.0 mm | Very extreme 81 |
| 1 Nov after | 40.1 °C | 12 % | 45 km/h | 0.0 mm | Very extreme 74 |
| 2 Nov after | 40.5 °C | 9 % | 47 km/h | 0.0 mm | Very extreme 74 |
| 3 Nov after | 39.8 °C | 11 % | 42 km/h | 0.0 mm | Very extreme 70 |
| 4 Nov after | 39.9 °C | 7 % | 46 km/h | 0.0 mm | Very extreme 80 |
| 5 Nov after | 38.8 °C | 8 % | 41 km/h | 0.0 mm | Very extreme 72 |
| 6 Nov after | 39.6 °C | 10 % | 44 km/h | 0.0 mm | Very extreme 74 |
| 7 Nov after | 39.0 °C | 11 % | 38 km/h | 0.0 mm | Extreme 68 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
Detections table · 199Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
- 23,249 haKayaOctober 2018 · 24 days · 8 km away
- 57,635 haKaya27 September 2016 · 38 days · 11 km away
- 42,926 haFouli2 October 2017 · 16 days · 12 km away
- 27,753 haAbadam28 October 2019 · 10 days · 19 km away
- 32,284 haKukawa12 October 2018 · 14 days · 21 km away
- 43,877 haAbadam8 October 2021 · 36 days · 26 km away
Frequently asked questions
- How long did the Fouli fire last?
- GWIS (Copernicus) dates it between 23 October 2021 and 28 October 2021: 6 days between the first and last heat detection of the perimeter.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 6,311 hectares (63.1 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire entered 2 municipalities: Fouli (5,984 ha, 0.8 %); Kaya (356 ha, 0.1 %).
- What was the weather like?
- During the fire the temperature reached 42.2 °C, humidity dropped to 5 % and gusts hit 42 km/h. The fire danger index (FWI) reached 66, class Extreme.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Chad (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Satellite cross-check
History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
No changes since 24 October 2026.
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
- Dates from the perimeter: the VIIRS detections inside it did not change them. 199 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
- Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.