Feshi fire, July 2020 Feshi, Kenge, Masi-Manimba
The fire started on 29 July 2020 in Feshi, Democratic Republic of the Congo, and satellites saw it burning for 29 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 7,949 hectares from heat detections, spread across 3 municipalities.
It is the 69th largest in Kwango since 2016 (of 219 with a page). Number 64 in Democratic Republic of the Congo in 2020, of 165.
Compare with…
- Burnt area
- 7,949ha
- GWIS perimeter (Copernicus)
- Duration
- 29days
- 29 Jul 2020 – 26 Aug 2020
- Municipalities hit
- 3
- territories
- Started on
- 29 Jul
- 2020
- Heat detections
- 322
- in a single hotspot: 62 MW
- Danger at start
- 27
- High · FWI index
- Average daily power
- 119MW
- detected power per day, on average
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone more than two months without rain (1 mm or more) when it started. Rain came after the fire: 3.0 mm on 22 Aug.
This area had burned before
49% of the perimeter overlaps earlier fires recorded since 2016: 4,232 ha in 2017, 79 ha in 2018. Part of it burned more than once, so the yearly figures add up to more than the 3,891 ha that had burned before.
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
Berlin boundary: geoBoundaries · Federal Agency for Cartography and Geodesy (dl-de/by-2-0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
Feshi where it started3,825 ha reached on 30 Jul0.2 %
-
3,338 ha reached on 29 Jul0.2 %
-
839 ha reached on 29 Jul0.1 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 5 Aug | 29.9 °C | 47 % | 30 km/h | 0.0 mm | High 27 |
| 6 Aug | 32.2 °C | 40 % | 24 km/h | 0.0 mm | High 26 |
| 7 Aug | 31.5 °C | 43 % | 23 km/h | 0.0 mm | High 26 |
| 8 Aug | 30.8 °C | 43 % | 24 km/h | 0.0 mm | High 27 |
| 9 Aug | 34.1 °C | 34 % | 25 km/h | 0.0 mm | High 31 |
| 10 Aug | 31.5 °C | 42 % | 27 km/h | 0.3 mm | High 30 |
| 11 Aug | 32.0 °C | 44 % | 25 km/h | 0.0 mm | High 29 |
| 12 Aug | 31.7 °C | 45 % | 20 km/h | 0.2 mm | High 27 |
| 13 Aug | 32.4 °C | 40 % | 24 km/h | 0.0 mm | High 28 |
| 14 Aug | 32.0 °C | 38 % | 21 km/h | 0.0 mm | High 28 |
| 15 Aug | 31.7 °C | 48 % | 24 km/h | 0.0 mm | High 26 |
| 16 Aug | 33.2 °C | 42 % | 22 km/h | 0.0 mm | High 25 |
| 17 Aug | 33.1 °C | 46 % | 26 km/h | 0.2 mm | High 27 |
| 18 Aug | 33.5 °C | 43 % | 20 km/h | 0.0 mm | High 26 |
| 19 Aug | 31.9 °C | 50 % | 23 km/h | 0.8 mm | Moderate 20 |
| 20 Aug | 31.2 °C | 56 % | 28 km/h | 0.5 mm | Moderate 18 |
| 21 Aug | 34.9 °C | 39 % | 32 km/h | 0.8 mm | High 24 |
| 22 Aug | 30.6 °C | 53 % | 34 km/h | 3.0 mm | Low 7 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
Detections table · 322Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
- 7,726 haMasi-Manimba31 May 2022 · 15 days · 12 km away
- 18,207 haMasi-Manimba22 May 2026 · 21 days · 21 km away
- 11,401 haMasi-Manimba25 May 2026 · 18 days · 32 km away
- 21,824 haKengeMay 2016 · 21 days · 35 km away
- 7,236 haFeshi30 May 2026 · 17 days · 36 km away
- 8,611 haMasi-Manimba17 August 2026 · 11 days · 39 km away
Frequently asked questions
- How long did the Feshi fire last?
- According to the heat detections seen by satellite inside the perimeter, it burned from 29 July 2020 to 26 August 2020 (29 days). The perimeter dates it from 5 August 2020 to 19 August 2020.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 7,949 hectares (79.5 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire entered 3 municipalities: Feshi (3,825 ha, 0.2 %); Kenge (3,338 ha, 0.2 %); Masi-Manimba (839 ha, 0.1 %).
- What was the weather like?
- During the fire the temperature reached 34.1 °C, humidity dropped to 34 % and gusts hit 30 km/h. The fire danger index (FWI) reached 31, class High.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Democratic Republic of the Congo (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Satellite cross-check
History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
No changes since 24 October 2026.
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
- Dates adjusted with the VIIRS detections inside the perimeter, which said 5 August 2020 to 19 August 2020. 322 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.