How long did the Fakfak fire last?

GWIS (Copernicus) dates it between 20 August 2026 and 28 August 2026: 9 days between the first and last heat detection of the perimeter.

How much area did it burn?

The perimeter GWIS (Copernicus) rebuilt from heat detections is 9,500 hectares (95.0 km²). It is an estimate: official national figures may differ.

Which municipalities burned?

The fire only entered Fakfak (9,561 ha, 0.9 %).

What was the weather like?

During the fire the temperature reached 33.0 °C, humidity dropped to 41 % and gusts hit 48 km/h. The fire danger index (FWI) reached 28, class High.

Where does this data come from?

From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Indonesia (geoBoundaries). It is not an official report.

ID · Indonesia · 2026-08-20 → 2026-08-28

Fakfak fire, 20 August 2026 Fakfak

Out · last detection 28 Aug 2026, 05:38 UTC

The fire started on 20 August 2026 in Fakfak, Indonesia, and satellites saw it burning for 9 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 9,500 hectares from heat detections, spread across a single municipality.

It is the 8th largest in West Papua since 2016 (of 47 with a page). Number 109 in Indonesia in 2026, of 1009.

Compare with…

Suggestions: Fakfak · 2026 Fakfak · 2026 Fakfak · 2026 Fakfak · 2026

Burnt area: 9,500ha; GWIS perimeter (Copernicus)
Duration: 9days; 20 Aug 2026 – 28 Aug 2026
Municipalities hit: 1; regencies
Started on: 20 Aug; 2026
Heat detections: 292; in a single hotspot: 106 MW
Danger at start: 23; High · FWI index
Average daily power: 413MW; detected power per day, on average

HOTSPOTS BY DAY 20 Aug28 Aug

Play back 28 Aug 2026

How it evolved, day by day

20 Aug 22 Aug 24 Aug 26 Aug 27 Aug 28 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

33°high

48km/h · peak gust

41%lowest humidity

It had gone 40 days without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

It burned the equivalent of 6% of the area of London (95 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

Fakfak where it started

9,561 ha reached on 20 Aug

0.9 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025

Built-up area0.22 ha

Residents≈ 50

Inside the perimeter there were about 0.22 hectares of built-up land and about 50 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day	High	Min. humidity	Peak gust	Rain	Danger (FWI)
20 Aug	31.6 °C	49 %	42 km/h	0.0 mm	High 23
21 Aug	31.8 °C	45 %	42 km/h	0.0 mm	High 25
22 Aug	32.0 °C	42 %	41 km/h	0.0 mm	High 26
23 Aug	31.2 °C	49 %	47 km/h	0.0 mm	High 28
24 Aug	32.7 °C	41 %	34 km/h	0.0 mm	High 25
25 Aug	32.8 °C	43 %	32 km/h	0.0 mm	High 25
26 Aug	32.5 °C	48 %	37 km/h	0.0 mm	High 27
27 Aug	32.1 °C	51 %	41 km/h	0.0 mm	High 28
28 Aug	32.7 °C	49 %	38 km/h	0.0 mm	High 27
29 Aug after	32.2 °C	53 %	40 km/h	0.0 mm	High 27
30 Aug after	30.6 °C	55 %	37 km/h	0.3 mm	High 25
31 Aug after	31.8 °C	50 %	48 km/h	0.0 mm	High 28
1 Sept after	33.0 °C	48 %	42 km/h	0.0 mm	High 27
2 Sept after	32.5 °C	50 %	35 km/h	0.0 mm	High 25
3 Sept after	32.7 °C	50 %	42 km/h	0.0 mm	High 27
4 Sept after	33.5 °C	48 %	34 km/h	0.0 mm	High 25
5 Sept after	32.2 °C	53 %	34 km/h	0.2 mm	High 25
6 Sept after	33.7 °C	44 %	32 km/h	0.0 mm	High 26
7 Sept after	32.9 °C	49 %	32 km/h	0.0 mm	High 26
8 Sept after	33.7 °C	43 %	33 km/h	0.0 mm	High 27
9 Sept after	33.3 °C	44 %	36 km/h	0.0 mm	High 28
10 Sept after	33.5 °C	44 %	43 km/h	0.0 mm	High 30
11 Sept after	33.0 °C	46 %	38 km/h	0.0 mm	High 29
12 Sept after	33.2 °C	42 %	39 km/h	0.0 mm	High 29
13 Sept after	32.7 °C	40 %	42 km/h	0.0 mm	High 31

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

↔

Before · 13 Aug 2026

After · 4 Sept 2026

Before After

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 24 August 2026 the air beside the fire reached 158 µg/m³ of PM2.5. That day averaged 72: 4.8 times the WHO daily guideline (15).

PM2.5 peak158 µg/m³

Days over the guideline10 days

PM10161 µg/m³

Optical depth1.50

WHO 15

1819202122232425262728293031

Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 292Every satellite heat detection, one by one, with time, satellite, power and coordinates.

⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.

Date and time	Satellite	FRP (MW)	Lat	Lon

Other fires nearby

All fires in Indonesia ›

Frequently asked questions

How long did the Fakfak fire last?: GWIS (Copernicus) dates it between 20 August 2026 and 28 August 2026: 9 days between the first and last heat detection of the perimeter.
How much area did it burn?: The perimeter GWIS (Copernicus) rebuilt from heat detections is 9,500 hectares (95.0 km²). It is an estimate: official national figures may differ.
Which municipalities burned?: The fire only entered Fakfak (9,561 ha, 0.9 %).
What was the weather like?: During the fire the temperature reached 33.0 °C, humidity dropped to 41 % and gusts hit 48 km/h. The fire danger index (FWI) reached 28, class High.
Where does this data come from?: From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Indonesia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings ›

Satellite cross-check

NASA FIRMS ↗
GWIS · Copernicus ↗

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

No changes since 24 October 2026.

RSS Changes to this page

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error

What do you think is wrong?

Dates or duration Place or towns Burned area Name It was not a wildfire Same fire as another page Something else

What really happened?

Your connection to the fire (optional) Email (optional)

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this

Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
Dates from the perimeter: the VIIRS detections inside it did not change them. 292 Suomi-NPP VIIRS detections on those dates.
We have not matched this page with any official record.
Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology ›

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.

Where it burned