Skip to content
worldfires
BO · Bolivia · –

Exaltación fire, 19 September 2024 Exaltación

Out · last detection 17 Oct 2024, 18:04 UTC

The fire started on 19 September 2024 in Exaltación, Bolivia, and satellites saw it burning for 29 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 38,330 hectares from heat detections, spread across a single municipality.

It is the 15th largest in Beni since 2016 (of 858 with a page). Number 13 in Bolivia in 2024, of 295.

Burnt area
38,330ha
GWIS perimeter (Copernicus)
Duration
29days
19 Sept 2024 – 17 Oct 2024
Municipalities hit
1
municipalities
Started on
19 Sept
2024
Heat detections
2,481
in a single hotspot: 907 MW
Danger at start
38
Very high · FWI index
Average daily power
1.5GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 19 Sept17 Oct
17 Oct 2024

How it evolved, day by day

19 Sept 2024 · 2 MW · 1 20 Sept 2024 · 23 MW · 6 21 Sept 2024 · 30 MW · 2 22 Sept 2024 · 223 MW · 18 23 Sept 2024 · 126 MW · 24 24 Sept 2024 · 1,426 MW · 57 25 Sept 2024 · 2,199 MW · 202 26 Sept 2024 · 1,653 MW · 219 27 Sept 2024 · 236 MW · 51 28 Sept 2024 · 832 MW · 91 29 Sept 2024 · 582 MW · 86 30 Sept 2024 · 1,226 MW · 149 1 Oct 2024 · 801 MW · 72 2 Oct 2024 · 2,296 MW · 144 3 Oct 2024 · 3,675 MW · 207 4 Oct 2024 · 90 MW · 10 5 Oct 2024 · 16,196 MW · 309 6 Oct 2024 · 2,958 MW · 326 7 Oct 2024 · 2,166 MW · 125 8 Oct 2024 · 1,310 MW · 73 9 Oct 2024 · 153 MW · 70 10 Oct 2024 · 233 MW · 38 11 Oct 2024 · 241 MW · 75 12 Oct 2024 · 29 MW · 4 13 Oct 2024 · 237 MW · 11 15 Oct 2024 · 249 MW · 30 16 Oct 2024 · 3,314 MW · 78 17 Oct 2024 · 14 MW · 3
19 Sept 25 Sept 5 Oct 13 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

40°high
50km/h · peak gust
26%lowest humidity

It had gone 3 days without rain (1 mm or more) when it started. Rain came after the fire: 5.6 mm on 18 Oct.

This area had burned before

52% of the perimeter overlaps earlier fires recorded since 2016: 3,674 ha in 2016, 931 ha in 2017, 1,394 ha in 2018, 4,790 ha in 2019, 15,999 ha in 2020, 8,652 ha in 2021, 480 ha in 2022, 8,486 ha in 2023. Part of it burned more than once, so the yearly figures add up to more than the 19,901 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 24% of the area of London (383 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Exaltación 8,012 inhabitants where it started
    38,632 ha
    1.5 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area0.86 ha
Residents≈ 60

Inside the perimeter there were about 0.86 hectares of built-up land and about 60 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
19 Sept 38.3 °C 33 % 37 km/h 0.0 mm Very high 38
20 Sept 38.9 °C 30 % 37 km/h 0.0 mm High 38
21 Sept 38.6 °C 35 % 32 km/h 0.3 mm High 34
22 Sept 39.7 °C 31 % 34 km/h 0.0 mm Very high 38
23 Sept 38.8 °C 34 % 41 km/h 0.0 mm Very high 43
24 Sept 39.4 °C 37 % 33 km/h 0.0 mm High 38
25 Sept 39.1 °C 36 % 39 km/h 0.2 mm Very high 44
26 Sept 37.6 °C 40 % 31 km/h 9.9 mm High 35
27 Sept 28.4 °C 52 % 39 km/h 6.9 mm Very low 5
28 Sept 34.5 °C 38 % 24 km/h 0.0 mm Moderate 16
29 Sept 37.8 °C 34 % 20 km/h 0.1 mm Moderate 20
30 Sept 35.6 °C 44 % 38 km/h 0.1 mm High 35
1 Oct 37.4 °C 38 % 41 km/h 0.1 mm High 36
2 Oct 38.8 °C 35 % 35 km/h 0.0 mm High 35
3 Oct 34.7 °C 41 % 32 km/h 1.5 mm High 37
4 Oct 34.0 °C 36 % 34 km/h 0.0 mm High 24
5 Oct 37.9 °C 31 % 19 km/h 0.0 mm High 23
6 Oct 39.4 °C 30 % 26 km/h 0.0 mm High 31
7 Oct 38.8 °C 38 % 34 km/h 0.0 mm High 36
8 Oct 38.4 °C 38 % 41 km/h 0.3 mm High 38
9 Oct 35.6 °C 46 % 42 km/h 3.3 mm High 36
10 Oct 37.5 °C 37 % 50 km/h 0.7 mm Moderate 16
11 Oct 36.7 °C 42 % 47 km/h 1.7 mm High 35
12 Oct 38.4 °C 26 % 41 km/h 0.0 mm High 30
13 Oct 39.7 °C 31 % 35 km/h 0.6 mm High 32
14 Oct 36.2 °C 42 % 20 km/h 1.0 mm Moderate 13
15 Oct 38.2 °C 35 % 34 km/h 0.3 mm High 32
16 Oct 38.1 °C 36 % 33 km/h 1.6 mm High 34
17 Oct 35.8 °C 41 % 37 km/h 2.2 mm Moderate 18
18 Oct after 35.4 °C 45 % 33 km/h 5.6 mm Moderate 16

Its twins: fires that started in the same weather

It started with an FWI of 38.1, a minimum humidity of 33% and 3 days without rain. Fires in the area that started in weather like this since 2016: 15.

FWI at the start 38.1
Minimum humidity 33 %
Days without rain 3
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Santa Ana fire, October 2023
3,088 ha 10 days FWI 37.5 Min. humidity 34 % 167 km away, in 2023

First rain (1 mm or more) after it ended: 9.1 mm on 26 Oct.

What happened to them

8 days
median duration
3,505 ha
median area
13 %
went past 10,000 ha
2.1 mm
rain at the end (median; 15 of 15 had it)

It was 10.9 times larger than the median of its twins and lasted 29 days, against 8 days.

None of its 15 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. All of them had rain in the ten days after the end: the first rainy day brought a median of 2.1 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

5.6 mmfirst rain
18 Octthe day after it ended
50km/h · max. gust

It was considered over on 17 Oct, and on 18 Oct 5.6 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 15 of 15, with a median of 2.1 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 12 Sept 2024
After · 24 Oct 2024

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 6 October 2024 the air beside the fire reached 568 µg/m³ of PM2.5. That day averaged 386: 26 times the WHO daily guideline (15).

PM2.5 peak568 µg/m³
Days over the guideline28 days
PM10814 µg/m³
Optical depth6.09
17 Sept23 Sept29 Sept5 Oct11 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 2,481Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Bolivia

Frequently asked questions

How long did the Exaltación fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 19 September 2024 to 17 October 2024 (29 days). The perimeter dates it from 19 September 2024 to 13 October 2024.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 38,330 hectares (383.3 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Exaltación (38,632 ha, 1.5 %).
What was the weather like?
During the fire the temperature reached 39.7 °C, humidity dropped to 26 % and gusts hit 50 km/h. The fire danger index (FWI) reached 44, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Bolivia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 15. Their median duration was 8 days and their median area 3,505 ha; 13 % went past 10,000 ha. None of its 15 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. All of them had rain in the ten days after the end: the first rainy day brought a median of 2.1 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 119 · 110 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 13 October 2024 → 17 October 2024.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 119 · 110.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 19 September 2024 to 13 October 2024. 2,481 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.