Skip to content
worldfires
BO · Bolivia · –

Exaltación fire, 5 September 2022 Exaltación

Out · last detection 7 Sept 2022, 17:22 UTC

The fire started on 5 September 2022 in Exaltación, Bolivia, and satellites saw it burning for 3 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,412 hectares from heat detections, spread across a single municipality.

It is the 708th largest in Beni since 2016 (of 858 with a page). Number 183 in Bolivia in 2022, of 222.

Burnt area
3,412ha
GWIS perimeter (Copernicus)
Duration
3days
5 Sept 2022 – 7 Sept 2022
Municipalities hit
1
municipalities
Started on
5 Sept
2022
Heat detections
89
in a single hotspot: 34 MW
Danger at start
29
High · FWI index
Average daily power
225MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 5 Sept7 Sept
7 Sept 2022

How it evolved, day by day

5 Sept 2022 · 283 MW · 37 6 Sept 2022 · 354 MW · 46 7 Sept 2022 · 38 MW · 6
5 Sept 6 Sept 7 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

34°high
34km/h · peak gust
29%lowest humidity

It had gone 16 days without rain (1 mm or more) when it started.

This area had burned before

71% of the perimeter overlaps earlier fires recorded since 2016: 173 ha in 2016, 1,275 ha in 2017, 194 ha in 2018, 493 ha in 2019, 714 ha in 2020, 688 ha in 2021. Part of it burned more than once, so the yearly figures add up to more than the 2,426 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 2.2% of the area of London (34 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Exaltación 8,012 inhabitants where it started
    3,435 ha
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
5 Sept 31.4 °C 34 % 34 km/h 0.0 mm High 29
6 Sept 31.1 °C 29 % 29 km/h 0.0 mm High 27
7 Sept 34.1 °C 36 % 28 km/h 0.0 mm High 28
8 Sept after 34.2 °C 41 % 37 km/h 0.0 mm High 34
9 Sept after 34.6 °C 47 % 32 km/h 0.2 mm High 30
10 Sept after 28.9 °C 61 % 35 km/h 0.6 mm Moderate 18
11 Sept after 30.0 °C 49 % 22 km/h 0.0 mm Moderate 14
12 Sept after 32.9 °C 53 % 24 km/h 0.0 mm Moderate 17
13 Sept after 33.0 °C 48 % 30 km/h 0.1 mm High 22
14 Sept after 30.0 °C 46 % 42 km/h 0.5 mm Moderate 20
15 Sept after 24.3 °C 47 % 58 km/h 0.8 mm High 22
16 Sept after 30.7 °C 36 % 30 km/h 0.0 mm Moderate 19
17 Sept after 34.0 °C 39 % 19 km/h 0.0 mm Moderate 20

Its twins: fires that started in the same weather

It started with an FWI of 29.1, a minimum humidity of 34% and 16 days without rain. Fires in the area that started in weather like this since 2016: 22.

FWI at the start 29.1
Minimum humidity 34 %
Days without rain 16
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Santa Rosa fire, September 2024
3,001 ha 7 days FWI 31.7 Min. humidity 34 % 107 km away, in 2024

First rain (1 mm or more) after it ended: 5.1 mm on 27 Sept.

What happened to them

8 days
median duration
4,938 ha
median area
23 %
went past 10,000 ha
3.3 mm
rain at the end (median; 17 of 22 had it)

It burned an area similar to its twins (3,412 ha against a median of 4,938 ha) and lasted 3 days, against 8 days.

In 5 of 22, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.3 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
34km/h · max. gust

It was considered over on 7 Sept, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 17 of 22, with a median of 3.3 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 29 Aug 2022
After · 14 Sept 2022

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 7 September 2022 the air beside the fire reached 341 µg/m³ of PM2.5. That day averaged 218: 15 times the WHO daily guideline (15).

PM2.5 peak341 µg/m³
Days over the guideline8 days
PM10486 µg/m³
Optical depth2.32
3 Sept5 Sept7 Sept9 Sept
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 89Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Bolivia

Frequently asked questions

How long did the Exaltación fire last?
GWIS (Copernicus) dates it between 5 September 2022 and 7 September 2022: 3 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,412 hectares (34.1 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Exaltación (3,435 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 34.1 °C, humidity dropped to 29 % and gusts hit 34 km/h. The fire danger index (FWI) reached 29, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Bolivia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 22. Their median duration was 8 days and their median area 4,938 ha; 23 % went past 10,000 ha. In 5 of 22, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.3 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 119 · 110 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 119 · 110.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 89 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.