Skip to content
worldfires
BO · Bolivia · –

Exaltación fire, 13 October 2020 Exaltación

Out · last detection 26 Oct 2020, 18:30 UTC

The fire started on 13 October 2020 in Exaltación, Bolivia, and satellites saw it burning for 14 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 4,435 hectares from heat detections, spread across a single municipality.

It is the 499th largest in Beni since 2016 (of 858 with a page). Number 127 in Bolivia in 2020, of 210.

Burnt area
4,435ha
GWIS perimeter (Copernicus)
Duration
14days
13 Oct 2020 – 26 Oct 2020
Municipalities hit
1
municipalities
Started on
13 Oct
2020
Heat detections
216
in a single hotspot: 35 MW
Danger at start
13
Moderate · FWI index
Average daily power
234MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 13 Oct26 Oct
26 Oct 2020

How it evolved, day by day

13 Oct 2020 · 136 MW · 7 15 Oct 2020 · 18 MW · 9 18 Oct 2020 · 79 MW · 5 20 Oct 2020 · 135 MW · 13 21 Oct 2020 · 8 MW · 6 22 Oct 2020 · 570 MW · 55 23 Oct 2020 · 535 MW · 40 24 Oct 2020 · 355 MW · 28 25 Oct 2020 · 271 MW · 24 26 Oct 2020 · 230 MW · 29
13 Oct 18 Oct 22 Oct 25 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

37°high
47km/h · peak gust
45%lowest humidity

It had gone 6 days without rain (1 mm or more) when it started. Rain came after the fire: 12.3 mm on 27 Oct.

This area had burned before

96% of the perimeter overlaps earlier fires recorded since 2016: 423 ha in 2016, 4,468 ha in 2017, 3,202 ha in 2018, 1,786 ha in 2019. Part of it burned more than once, so the yearly figures add up to more than the 4,270 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 2.8% of the area of London (44 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Exaltación 8,012 inhabitants where it started
    4,463 ha
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
13 Oct 36.3 °C 45 % 19 km/h 0.4 mm Moderate 13
14 Oct 35.2 °C 47 % 24 km/h 0.6 mm Moderate 18
15 Oct 33.2 °C 57 % 26 km/h 0.2 mm Moderate 14
16 Oct 28.9 °C 71 % 29 km/h 7.4 mm Very low 0
17 Oct 34.2 °C 53 % 18 km/h 0.4 mm Very low 3
18 Oct 33.6 °C 55 % 23 km/h 1.1 mm Low 8
19 Oct 30.9 °C 64 % 37 km/h 0.3 mm Moderate 12
20 Oct 35.1 °C 48 % 28 km/h 0.9 mm Moderate 13
21 Oct 33.2 °C 52 % 26 km/h 1.4 mm Low 8
22 Oct 34.7 °C 51 % 22 km/h 1.0 mm Low 7
23 Oct 36.7 °C 45 % 28 km/h 0.0 mm Moderate 15
24 Oct 36.4 °C 45 % 39 km/h 0.1 mm Moderate 21
25 Oct 35.4 °C 52 % 47 km/h 0.3 mm High 27
26 Oct 35.2 °C 48 % 47 km/h 1.7 mm High 25
27 Oct after 28.2 °C 67 % 33 km/h 12.3 mm Very low 2

Its twins: fires that started in the same weather

It started with an FWI of 13.2, a minimum humidity of 45% and 6 days without rain. Fires in the area that started in weather like this since 2016: 42.

FWI at the start 13.2
Minimum humidity 45 %
Days without rain 6
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Exaltación fire, September 2019
5,151 ha 8 days FWI 12.7 Min. humidity 46 % 19 km away, in 2019

First rain (1 mm or more) after it ended: 1.7 mm on 11 Sept.

What happened to them

10 days
median duration
5,339 ha
median area
17 %
went past 10,000 ha
5.6 mm
rain at the end (median; 40 of 42 had it)

It burned an area similar to its twins (4,435 ha against a median of 5,339 ha) and lasted 14 days, against 10 days.

In 2 of 42, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 5.6 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

12.3 mmfirst rain
27 Octthe day after it ended
47km/h · max. gust

It was considered over on 26 Oct, and on 27 Oct 12.3 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 40 of 42, with a median of 5.6 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 6 Oct 2020
After · 2 Nov 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 216Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Bolivia

Frequently asked questions

How long did the Exaltación fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 13 October 2020 to 26 October 2020 (14 days). The perimeter dates it from 18 October 2020 to 26 October 2020.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 4,435 hectares (44.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Exaltación (4,463 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 36.7 °C, humidity dropped to 45 % and gusts hit 47 km/h. The fire danger index (FWI) reached 27, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Bolivia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 42. Their median duration was 10 days and their median area 5,339 ha; 17 % went past 10,000 ha. In 2 of 42, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 5.6 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 119 · 110 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 18 October 2020 → 13 October 2020.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 119 · 110.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 18 October 2020 to 26 October 2020. 216 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.