Skip to content
worldfires
RU · Russia · –

Evenkiysky Rayon fire, 29 July 2026 Evenkiysky Rayon

Out · last detection 29 Aug 2026, 21:06 UTC

The fire started on 29 July 2026 in Evenkiysky Rayon, Russia, and satellites saw it burning for 33 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 24,695 hectares from heat detections, spread across a single municipality.

Number 42 in Russia in 2026, of 420.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
24,695ha
GWIS perimeter (Copernicus)
Duration
33days
29 Jul 2026 – 30 Aug 2026
Municipalities hit
1
districts
Started on
29 Jul
2026
Heat detections
3,610
in a single hotspot: 1,083 MW
Danger at start
46
Very high · FWI index
Average daily power
1.7GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 29 Jul30 Aug
29 Aug 2026

How it evolved, day by day

29 Jul 2026 · 30 MW · 4 30 Jul 2026 · 48 MW · 12 31 Jul 2026 · 159 MW · 44 1 Aug 2026 · 344 MW · 94 2 Aug 2026 · 30,525 MW · 721 3 Aug 2026 · 939 MW · 155 4 Aug 2026 · 1,170 MW · 225 5 Aug 2026 · 1,086 MW · 321 6 Aug 2026 · 8,367 MW · 321 7 Aug 2026 · 23 MW · 11 8 Aug 2026 · 663 MW · 90 9 Aug 2026 · 135 MW · 23 10 Aug 2026 · 16 MW · 9 11 Aug 2026 · 545 MW · 114 12 Aug 2026 · 4 MW · 1 16 Aug 2026 · 205 MW · 34 17 Aug 2026 · 462 MW · 123 18 Aug 2026 · 641 MW · 146 19 Aug 2026 · 269 MW · 99 20 Aug 2026 · 273 MW · 79 21 Aug 2026 · 117 MW · 65 22 Aug 2026 · 231 MW · 92 23 Aug 2026 · 398 MW · 150 24 Aug 2026 · 264 MW · 93 25 Aug 2026 · 198 MW · 85 26 Aug 2026 · 413 MW · 124 27 Aug 2026 · 292 MW · 158 28 Aug 2026 · 119 MW · 87 29 Aug 2026 · 336 MW · 130
2 Aug 10 Aug 19 Aug 25 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (107 passes) and with what wind. Watch the film

The weather it burned in

34°high
47km/h · peak gust
21%lowest humidity

It had gone 17 days without rain (1 mm or more) when it started. Rain came after the fire: 1.2 mm on 31 Aug.

This area had burned before

3% of the perimeter overlaps earlier fires recorded since 2016: 515 ha in 2018, 333 ha in 2021. Part of it burned more than once, so the yearly figures add up to more than the 782 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 16% of the area of London (247 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Evenkiysky Rayon where it started
    24,695 ha reached on 29 Jul
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
29 Jul 31.8 °C 21 % 34 km/h 0.0 mm Very high 46
30 Jul 33.0 °C 22 % 22 km/h 0.0 mm High 36
31 Jul 33.5 °C 22 % 16 km/h 0.0 mm High 33
1 Aug 31.8 °C 29 % 16 km/h 0.0 mm High 34
2 Aug 31.0 °C 26 % 40 km/h 0.4 mm Very high 48
3 Aug 21.2 °C 29 % 33 km/h 0.0 mm High 36
4 Aug 21.5 °C 27 % 22 km/h 0.0 mm High 31
5 Aug 24.6 °C 22 % 23 km/h 0.0 mm High 32
6 Aug 26.5 °C 22 % 47 km/h 0.0 mm Very high 48
7 Aug 24.8 °C 48 % 30 km/h 2.0 mm Moderate 13
8 Aug 25.7 °C 38 % 36 km/h 0.1 mm Moderate 19
9 Aug 20.2 °C 41 % 37 km/h 0.0 mm High 28
10 Aug 20.2 °C 41 % 28 km/h 0.4 mm High 24
11 Aug 20.8 °C 34 % 31 km/h 0.0 mm High 27
12 Aug 19.5 °C 35 % 24 km/h 0.4 mm High 25
13 Aug 19.2 °C 39 % 27 km/h 0.7 mm Moderate 19
14 Aug 18.3 °C 45 % 29 km/h 0.2 mm Moderate 19
15 Aug 18.0 °C 42 % 30 km/h 0.1 mm High 24
16 Aug 19.8 °C 41 % 30 km/h 0.0 mm High 25
17 Aug 23.1 °C 34 % 24 km/h 0.1 mm High 30
18 Aug 20.7 °C 49 % 28 km/h 0.4 mm High 24
19 Aug 20.5 °C 33 % 23 km/h 0.0 mm High 23
20 Aug 21.1 °C 28 % 20 km/h 0.0 mm High 28
21 Aug 22.2 °C 27 % 17 km/h 0.0 mm High 26
22 Aug 22.8 °C 28 % 21 km/h 0.0 mm High 30
23 Aug 20.8 °C 30 % 27 km/h 0.0 mm High 31
24 Aug 22.2 °C 31 % 22 km/h 0.0 mm High 27
25 Aug 23.0 °C 33 % 12 km/h 0.0 mm High 26
26 Aug 23.2 °C 31 % 22 km/h 0.0 mm High 29
27 Aug 22.2 °C 32 % 12 km/h 0.0 mm High 24
28 Aug 19.7 °C 33 % 26 km/h 0.0 mm High 32
29 Aug 20.7 °C 49 % 26 km/h 0.0 mm High 25
30 Aug 19.5 °C 58 % 32 km/h 3.9 mm High 26
31 Aug after 23.1 °C 49 % 34 km/h 1.2 mm Low 5

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 22 Jul 2026
After · 6 Sept 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 25 August 2026 the air beside the fire reached 2,213 µg/m³ of PM2.5. That day averaged 1,503: 100 times the WHO daily guideline (15).

PM2.5 peak2,213 µg/m³
Days over the guideline36 days
PM102,243 µg/m³
Optical depth4.83
27 Jul4 Aug12 Aug20 Aug28 Aug
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 3,610Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Russia

Frequently asked questions

How long did the Evenkiysky Rayon fire last?
GWIS (Copernicus) dates it between 29 July 2026 and 30 August 2026: 33 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 24,695 hectares (247.0 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Evenkiysky Rayon (24,695 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 33.5 °C, humidity dropped to 21 % and gusts hit 47 km/h. The fire danger index (FWI) reached 48, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Area: 25,495 → 24,695 ha.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 3,610 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.