Skip to content
worldfires
RU · Russia · –

Evenkiysky Rayon fire, 14 August 2020 Evenkiysky Rayon

Out · last detection 31 Aug 2020, 19:58 UTC

The fire started on 14 August 2020 in Evenkiysky Rayon, Russia, and satellites saw it burning for 18 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 22,847 hectares from heat detections, spread across a single municipality.

It is the 41th largest in Krasnoyarsk Krai since 2016 (of 538 with a page). Number 49 in Russia in 2020, of 592.

Burnt area
22,847ha
GWIS perimeter (Copernicus)
Duration
18days
14 Aug 2020 – 31 Aug 2020
Municipalities hit
1
districts
Started on
14 Aug
2020
Heat detections
4,077
in a single hotspot: 319 MW
Danger at start
28
High · FWI index
Average daily power
1.8GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 14 Aug31 Aug
31 Aug 2020

How it evolved, day by day

14 Aug 2020 · 6 MW · 4 15 Aug 2020 · 18 MW · 9 16 Aug 2020 · 171 MW · 29 17 Aug 2020 · 223 MW · 57 18 Aug 2020 · 2,260 MW · 158 19 Aug 2020 · 4,523 MW · 340 20 Aug 2020 · 98 MW · 52 21 Aug 2020 · 92 MW · 52 22 Aug 2020 · 634 MW · 172 23 Aug 2020 · 954 MW · 214 24 Aug 2020 · 1,455 MW · 273 25 Aug 2020 · 1,526 MW · 314 26 Aug 2020 · 4,374 MW · 612 27 Aug 2020 · 3,601 MW · 609 28 Aug 2020 · 1,016 MW · 250 29 Aug 2020 · 5,288 MW · 473 30 Aug 2020 · 4,957 MW · 329 31 Aug 2020 · 970 MW · 130
14 Aug 18 Aug 22 Aug 26 Aug 29 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

26°high
43km/h · peak gust
21%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 7.5 mm on 1 Sept.

This area had burned before

1% of the perimeter overlaps earlier fires recorded since 2016: 337 ha in 2017.

How big is it?

10 km
It burned the equivalent of 14% of the area of London (228 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Evenkiysky Rayon where it started
    19,898 ha reached on 14 Aug
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
14 Aug 20.3 °C 25 % 43 km/h 0.0 mm High 28
15 Aug 16.5 °C 36 % 40 km/h 0.0 mm High 27
16 Aug 18.3 °C 34 % 34 km/h 0.0 mm High 27
17 Aug 21.9 °C 26 % 30 km/h 0.0 mm High 29
18 Aug 24.1 °C 21 % 33 km/h 0.0 mm High 36
19 Aug 26.1 °C 26 % 31 km/h 0.0 mm High 37
20 Aug 22.6 °C 53 % 33 km/h 4.2 mm High 26
21 Aug 23.3 °C 37 % 33 km/h 0.0 mm Low 7
22 Aug 23.4 °C 38 % 27 km/h 0.0 mm Moderate 19
23 Aug 22.6 °C 34 % 34 km/h 0.0 mm High 28
24 Aug 22.1 °C 32 % 29 km/h 0.0 mm High 27
25 Aug 22.2 °C 34 % 31 km/h 0.0 mm High 30
26 Aug 21.7 °C 27 % 38 km/h 0.0 mm High 34
27 Aug 21.9 °C 29 % 31 km/h 0.0 mm High 33
28 Aug 20.1 °C 41 % 22 km/h 0.0 mm High 22
29 Aug 20.6 °C 48 % 32 km/h 0.0 mm High 26
30 Aug 20.3 °C 48 % 30 km/h 0.1 mm High 26
31 Aug 18.3 °C 49 % 33 km/h 0.1 mm High 26
1 Sept after 15.4 °C 71 % 37 km/h 7.5 mm Very low 1

Its twins: fires that started in the same weather

It started with an FWI of 28.0, a minimum humidity of 25% and rain the day before. Fires in the area that started in weather like this since 2016: 31.

FWI at the start 28.0
Minimum humidity 25 %
Days without rain 0
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Evenkiysky Rayon fire, June 2017
8,257 ha 12 days FWI 29.1 Min. humidity 25 % 57 km away, in 2017

First rain (1 mm or more) after it ended: 28.9 mm on 24 Jun.

What happened to them

18 days
median duration
7,579 ha
median area
35 %
went past 10,000 ha
4.5 mm
rain at the end (median; 31 of 31 had it)

It was 3.0 times larger than the median of its twins and lasted 18 days, against 18 days.

Only 5 of its 31 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. All of them had rain in the ten days after the end: the first rainy day brought a median of 4.5 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

7.5 mmfirst rain
1 Septthe day after it ended
43km/h · max. gust

It was considered over on 31 Aug, and on 1 Sept 7.5 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 31 of 31, with a median of 4.5 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 7 Aug 2020
After · 7 Sept 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 4,077Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Russia

Frequently asked questions

How long did the Evenkiysky Rayon fire last?
GWIS (Copernicus) dates it between 14 August 2020 and 31 August 2020: 18 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 22,847 hectares (228.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Evenkiysky Rayon (19,898 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 26.1 °C, humidity dropped to 21 % and gusts hit 43 km/h. The fire danger index (FWI) reached 37, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 31. Their median duration was 18 days and their median area 7,579 ha; 35 % went past 10,000 ha. Only 5 of its 31 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. All of them had rain in the ten days after the end: the first rainy day brought a median of 4.5 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 4,077 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.