Skip to content
worldfires
RU · Russia · –

Evenkiysky Rayon fire, 8 July 2018 Severo-Yeniseysky Rayon, Evenkiysky Rayon

Out · last detection 24 Jul 2018, 20:17 UTC

The fire started on 8 July 2018 in Evenkiysky Rayon, Russia, and satellites saw it burning for 17 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 10,759 hectares from heat detections, spread across 2 municipalities.

It is the 148th largest in Krasnoyarsk Krai since 2016 (of 538 with a page). Number 122 in Russia in 2018, of 540.

Burnt area
10,759ha
GWIS perimeter (Copernicus)
Duration
17days
8 Jul 2018 – 24 Jul 2018
Municipalities hit
2
districts
Started on
8 Jul
2018
Heat detections
2,041
in a single hotspot: 222 MW
Danger at start
17
Moderate · FWI index
Average daily power
464MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 8 Jul24 Jul
24 Jul 2018

How it evolved, day by day

8 Jul 2018 · 3 MW · 3 9 Jul 2018 · 403 MW · 53 10 Jul 2018 · 236 MW · 85 11 Jul 2018 · 24 MW · 17 12 Jul 2018 · 2,138 MW · 99 13 Jul 2018 · 58 MW · 12 14 Jul 2018 · 30 MW · 27 15 Jul 2018 · 45 MW · 35 16 Jul 2018 · 254 MW · 88 17 Jul 2018 · 708 MW · 228 18 Jul 2018 · 411 MW · 200 19 Jul 2018 · 125 MW · 23 20 Jul 2018 · 545 MW · 200 21 Jul 2018 · 1,319 MW · 303 22 Jul 2018 · 486 MW · 218 23 Jul 2018 · 975 MW · 349 24 Jul 2018 · 124 MW · 101
8 Jul 12 Jul 16 Jul 20 Jul 24 Jul

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

27°high
39km/h · peak gust
26%lowest humidity

It had gone 3 days without rain (1 mm or more) when it started. Rain came after the fire: 1.4 mm on 25 Jul.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 6.8% of the area of London (108 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. 7,484 ha reached on 9 Jul
    0.2 %
  2. Evenkiysky Rayon where it started
    2,941 ha reached on 8 Jul
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
8 Jul 21.2 °C 38 % 26 km/h 0.1 mm Moderate 17
9 Jul 24.3 °C 28 % 30 km/h 0.0 mm High 26
10 Jul 27.0 °C 30 % 21 km/h 0.0 mm High 23
11 Jul 24.8 °C 47 % 27 km/h 0.6 mm Moderate 16
12 Jul 27.0 °C 33 % 23 km/h 0.0 mm High 22
13 Jul 26.4 °C 39 % 19 km/h 0.0 mm Moderate 20
14 Jul 23.0 °C 43 % 31 km/h 1.1 mm Moderate 14
15 Jul 22.8 °C 26 % 39 km/h 0.0 mm High 28
16 Jul 24.0 °C 26 % 32 km/h 0.0 mm High 30
17 Jul 22.2 °C 40 % 34 km/h 0.0 mm High 32
18 Jul 23.5 °C 36 % 32 km/h 0.0 mm High 30
19 Jul 24.0 °C 41 % 20 km/h 0.0 mm High 22
20 Jul 21.7 °C 32 % 37 km/h 0.0 mm High 27
21 Jul 16.9 °C 31 % 36 km/h 0.0 mm High 30
22 Jul 16.9 °C 30 % 28 km/h 0.0 mm High 28
23 Jul 22.4 °C 37 % 28 km/h 0.0 mm High 27
24 Jul 19.2 °C 46 % 34 km/h 1.4 mm Moderate 21
25 Jul after 14.2 °C 65 % 32 km/h 1.4 mm Low 8

Its twins: fires that started in the same weather

It started with an FWI of 16.8, a minimum humidity of 38% and 3 days without rain. Fires in the area that started in weather like this since 2016: 23.

FWI at the start 16.8
Minimum humidity 38 %
Days without rain 3
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Boguchansky Rayon fire, August 2019
5,501 ha 5 days FWI 16.8 Min. humidity 37 % 193 km away, in 2019

First rain (1 mm or more) after it ended: 23.4 mm on 12 Aug.

What happened to them

12 days
median duration
6,623 ha
median area
30 %
went past 10,000 ha
10.4 mm
rain at the end (median; 22 of 23 had it)

It was 1.6 times larger than the median of its twins and lasted 17 days, against 12 days.

Only 7 of its 23 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 1 of 23, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 10.4 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.4 mmfirst rain
25 Julthe day after it ended
39km/h · max. gust

It was considered over on 24 Jul, and on 25 Jul 1.4 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 22 of 23, with a median of 10.4 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 1 Jul 2018
After · 31 Jul 2018

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 2,041Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Russia

Frequently asked questions

How long did the Evenkiysky Rayon fire last?
GWIS (Copernicus) dates it between 8 July 2018 and 24 July 2018: 17 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 10,759 hectares (107.6 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Severo-Yeniseysky Rayon (7,484 ha, 0.2 %); Evenkiysky Rayon (2,941 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 27.0 °C, humidity dropped to 26 % and gusts hit 39 km/h. The fire danger index (FWI) reached 32, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 23. Their median duration was 12 days and their median area 6,623 ha; 30 % went past 10,000 ha. Only 7 of its 23 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 1 of 23, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 10.4 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 2,041 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.