Skip to content
worldfires
RU · Russia · –

Evenkiysky Rayon fire, 6 August 2017 Evenkiysky Rayon

Out · last detection 22 Aug 2017, 06:29 UTC

The fire started on 6 August 2017 in Evenkiysky Rayon, Russia, and satellites saw it burning for 17 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 7,552 hectares from heat detections, spread across a single municipality.

It is the 231th largest in Krasnoyarsk Krai since 2016 (of 538 with a page). Number 101 in Russia in 2017, of 367.

Burnt area
7,552ha
GWIS perimeter (Copernicus)
Duration
17days
6 Aug 2017 – 22 Aug 2017
Municipalities hit
1
districts
Started on
6 Aug
2017
Heat detections
1,013
in a single hotspot: 197 MW
Danger at start
28
High · FWI index
Average daily power
430MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 6 Aug22 Aug
22 Aug 2017

How it evolved, day by day

6 Aug 2017 · 41 MW · 15 7 Aug 2017 · 140 MW · 51 8 Aug 2017 · 2,358 MW · 196 9 Aug 2017 · 1,179 MW · 213 10 Aug 2017 · 1,029 MW · 97 11 Aug 2017 · 4 MW · 2 13 Aug 2017 · 70 MW · 31 14 Aug 2017 · 55 MW · 9 15 Aug 2017 · 80 MW · 17 16 Aug 2017 · 306 MW · 103 17 Aug 2017 · 345 MW · 45 19 Aug 2017 · 385 MW · 152 20 Aug 2017 · 21 MW · 11 21 Aug 2017 · 60 MW · 19 22 Aug 2017 · 380 MW · 52
8 Aug 13 Aug 16 Aug 20 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

32°high
52km/h · peak gust
23%lowest humidity

It had gone 8 days without rain (1 mm or more) when it started. Rain came after the fire: 2.7 mm on 23 Aug.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 4.8% of the area of London (76 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Evenkiysky Rayon where it started
    7,042 ha reached on 6 Aug
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
6 Aug 31.7 °C 23 % 25 km/h 0.0 mm High 28
7 Aug 32.5 °C 23 % 26 km/h 0.0 mm High 28
8 Aug 31.0 °C 31 % 36 km/h 0.0 mm High 30
9 Aug 30.3 °C 35 % 26 km/h 2.1 mm Moderate 12
10 Aug 26.9 °C 37 % 40 km/h 0.0 mm Moderate 20
11 Aug 23.0 °C 43 % 32 km/h 0.4 mm Moderate 20
12 Aug 27.5 °C 40 % 37 km/h 0.1 mm Moderate 20
13 Aug 30.6 °C 29 % 35 km/h 0.0 mm High 27
14 Aug 29.8 °C 34 % 52 km/h 0.8 mm High 29
15 Aug 16.5 °C 54 % 33 km/h 0.0 mm Moderate 19
16 Aug 17.7 °C 38 % 27 km/h 0.0 mm Moderate 17
17 Aug 19.1 °C 40 % 20 km/h 0.0 mm Moderate 17
18 Aug 19.8 °C 41 % 25 km/h 0.0 mm Moderate 18
19 Aug 23.9 °C 28 % 30 km/h 0.0 mm High 23
20 Aug 23.4 °C 35 % 28 km/h 0.2 mm High 25
21 Aug 20.3 °C 39 % 38 km/h 0.5 mm High 26
22 Aug 17.1 °C 29 % 39 km/h 0.0 mm High 26
23 Aug after 13.0 °C 66 % 28 km/h 2.7 mm Very low 4

Its twins: fires that started in the same weather

It started with an FWI of 27.6, a minimum humidity of 23% and 8 days without rain. Fires in the area that started in weather like this since 2016: 32.

FWI at the start 27.6
Minimum humidity 23 %
Days without rain 8
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Evenkiysky Rayon fire, July 2016
6,253 ha 14 days FWI 26.1 Min. humidity 23 % 43 km away, in 2016

First rain (1 mm or more) after it ended: 3.5 mm on 15 Jul.

What happened to them

13 days
median duration
6,218 ha
median area
22 %
went past 10,000 ha
4.9 mm
rain at the end (median; 31 of 32 had it)

It burned an area similar to its twins (7,552 ha against a median of 6,218 ha) and lasted 17 days, against 13 days.

In 1 of 32, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.9 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

2.7 mmfirst rain
23 Augthe day after it ended
52km/h · max. gust

It was considered over on 22 Aug, and on 23 Aug 2.7 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 31 of 32, with a median of 4.9 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 30 Jul 2017
After · 29 Aug 2017

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 1,013Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Russia

Frequently asked questions

How long did the Evenkiysky Rayon fire last?
GWIS (Copernicus) dates it between 6 August 2017 and 22 August 2017: 17 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 7,552 hectares (75.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Evenkiysky Rayon (7,042 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 32.5 °C, humidity dropped to 23 % and gusts hit 52 km/h. The fire danger index (FWI) reached 30, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 32. Their median duration was 13 days and their median area 6,218 ha; 22 % went past 10,000 ha. In 1 of 32, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.9 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 1,013 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.