How long did the Etheridge fire last?

GWIS (Copernicus) dates it between 28 October 2025 and 14 November 2025: 18 days between the first and last heat detection of the perimeter.

How much area did it burn?

The perimeter GWIS (Copernicus) rebuilt from heat detections is 19,177 hectares (191.8 km²). It is an estimate: official national figures may differ.

Which municipalities burned?

The fire only entered Etheridge (19,319 ha, 0.5 %).

What was the weather like?

During the fire the temperature reached 38.7 °C, humidity dropped to 11 % and gusts hit 41 km/h. The fire danger index (FWI) reached 59, class Extreme.

Where does this data come from?

From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

AU · Australia · 2025-10-28 → 2025-11-14

Etheridge fire, 28 October 2025 Etheridge

Out · last detection 11 Nov 2025, 04:22 UTC

The fire started on 28 October 2025 in Etheridge, Australia, and satellites saw it burning for 18 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 19,177 hectares from heat detections, spread across a single municipality.

It is the 328th largest in Queensland since 2016 (of 1737 with a page). Number 213 in Australia in 2025, of 1124.

Burnt area: 19,177ha; GWIS perimeter (Copernicus)
Duration: 18days; 28 Oct 2025 – 14 Nov 2025
Municipalities hit: 1; local government areas
Started on: 28 Oct; 2025
Heat detections: 481; in a single hotspot: 100 MW
Danger at start: 25; High · FWI index
Energy released: 3.4GW; sum of detected power

Play back 11 Nov 2025

HOTSPOTS BY DAY 28 Oct14 Nov

How it evolved, day by day

2930311234567891011

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

39°high

41km/h · peak gust

11%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 2.1 mm on 25 Nov.

This area had burned before

73% of the perimeter overlaps earlier fires recorded since 2016: 315 ha in 2017, 4,166 ha in 2018, 701 ha in 2019, 5,595 ha in 2020, 175 ha in 2021, 4,526 ha in 2022, 6,562 ha in 2023. Part of it burned more than once, so the yearly figures add up to more than the 13,955 ha that had burned before.

What happened to each town

Etheridge where it started

19,319 ha reached on 29 Oct

0.5 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance is from the town centre to the nearest fire: staying a kilometre away does not mean it reached the houses.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day	High	Min. humidity	Peak gust	Rain	Danger (FWI)
28 Oct	32.9 °C	38 %	32 km/h	1.0 mm	High 25
29 Oct	36.0 °C	29 %	33 km/h	0.1 mm	High 33
30 Oct	38.2 °C	16 %	29 km/h	0.0 mm	Very high 42
31 Oct	38.1 °C	23 %	35 km/h	0.0 mm	Very high 48
1 Nov	38.3 °C	22 %	33 km/h	0.0 mm	Very high 46
2 Nov	38.4 °C	18 %	27 km/h	0.0 mm	Very high 46
3 Nov	33.3 °C	37 %	41 km/h	0.6 mm	Very high 38
4 Nov	35.1 °C	29 %	31 km/h	0.0 mm	High 34
5 Nov	37.0 °C	18 %	34 km/h	0.0 mm	Very high 46
6 Nov	37.2 °C	23 %	31 km/h	0.0 mm	Very high 44
7 Nov	36.9 °C	21 %	32 km/h	0.0 mm	Very high 46
8 Nov	35.2 °C	29 %	39 km/h	0.0 mm	Very high 49
9 Nov	34.2 °C	31 %	37 km/h	0.1 mm	Very high 41
10 Nov	38.0 °C	13 %	40 km/h	0.0 mm	Extreme 57
11 Nov	38.4 °C	11 %	36 km/h	0.0 mm	Extreme 59
12 Nov	38.7 °C	12 %	34 km/h	0.0 mm	Extreme 51
13 Nov	34.2 °C	35 %	40 km/h	1.0 mm	High 33
14 Nov	33.3 °C	38 %	35 km/h	3.5 mm	Moderate 14
15 Nov after	34.9 °C	37 %	28 km/h	0.0 mm	High 26
16 Nov after	32.4 °C	49 %	36 km/h	6.2 mm	Low 6
17 Nov after	31.9 °C	34 %	36 km/h	12.0 mm	Very low 4
18 Nov after	36.3 °C	12 %	25 km/h	0.0 mm	High 26
19 Nov after	37.7 °C	13 %	35 km/h	0.0 mm	High 37
20 Nov after	37.7 °C	16 %	31 km/h	0.0 mm	High 32
21 Nov after	38.2 °C	18 %	26 km/h	0.0 mm	High 36
22 Nov after	39.5 °C	19 %	35 km/h	0.0 mm	Very high 41
23 Nov after	39.1 °C	20 %	29 km/h	0.0 mm	Very high 41
24 Nov after	38.7 °C	28 %	32 km/h	0.0 mm	Very high 38
25 Nov after	37.5 °C	33 %	37 km/h	2.1 mm	High 22

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

↔

Before · 21 Oct 2025

After · 21 Nov 2025

Before After

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 12 November 2025 the air beside the fire reached 121 µg/m³ of PM2.5. That day averaged 46: 3.1 times the WHO daily guideline (15).

PM2.5 peak121 µg/m³

Days over the guideline10 days

PM10125 µg/m³

Optical depth1.64

WHO 15

2627282930311234567891011121314151617

Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 481Every satellite heat detection, one by one, with time, satellite, power and coordinates.

⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.

Date and time	Satellite	FRP (MW)	Lat	Lon

Other fires nearby

All fires in Australia ›

Frequently asked questions

How long did the Etheridge fire last?: GWIS (Copernicus) dates it between 28 October 2025 and 14 November 2025: 18 days between the first and last heat detection of the perimeter.
How much area did it burn?: The perimeter GWIS (Copernicus) rebuilt from heat detections is 19,177 hectares (191.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?: The fire only entered Etheridge (19,319 ha, 0.5 %).
What was the weather like?: During the fire the temperature reached 38.7 °C, humidity dropped to 11 % and gusts hit 41 km/h. The fire danger index (FWI) reached 59, class Extreme.
Where does this data come from?: From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000

Satellite cross-check

NASA FIRMS ↗
GWIS · Copernicus ↗

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error

What do you think is wrong?

Dates or duration Place or towns Burned area Name It was not a wildfire Same fire as another page Something else

What really happened?

Your connection to the fire (optional) Email (optional)

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.

Where it burned