Burned area
satellite only125ha
Perimeter published by EFFIS (Copernicus).
- Source
- EFFIS (Copernicus)
- Date
- perimeter revised on 22 February 2022
+− cross-check
No official record is matched to this page to compare it with.
ES · Spain · –
Encinedo fire, February 2022 Encinedo
Out · last detection 9 Feb 2022, 03:26 UTC
The fire started on 8 February 2022 in Encinedo, Spain, and satellites saw it burning for 2 days. Copernicus mapped a burnt perimeter of 125 hectares from satellite imagery, spread across a single municipality.
It is the 72th largest in León since 2016 (of 86 with a page). Number 155 in Spain in 2022, of 196.
Use this data
Compare with…
Use this data
Fire page data · version 2026-10-24matches the official recordwith caveatssatellite onlymodel
When copying, the sentence is
Tick the figures you want: they make up the lede and the CSV.
Duration by satellite
satellite only2days
8 Feb 2022 to 9 Feb 2022: first and last day with fire on the page.
- Source
- EFFIS (Copernicus) · NASA FIRMS · VIIRS
- Date
- last detection: 9 Feb 2022, 03:26 UTC
+− cross-check
Satellites pass a few times a day and cloud or smoke can hide the fire: a lack of detections is not an official extinction. Each country’s emergency service declares a fire contained or out.
Start
satellite only8 Feb 2022
First day with fire seen by the satellites or the perimeter.
- Source
- EFFIS (Copernicus) · NASA FIRMS · VIIRS
- Date
- 8 Feb 2022
+− cross-check
No official record is matched to this page, so the alert time and the cause are not known here.
Hotspots
satellite only8
VIIRS detections at 375 m. Most intense hotspot: 34 MW.
- Source
- NASA FIRMS · VIIRS (Suomi NPP)
- Date
- 8 Feb 2022 – 9 Feb 2022
+− cross-check
There is no official record to compare with. Each hotspot is a pixel detected in one satellite pass, not a separate fire.
The worst day
satellite only114MW
Total radiative power on 8 February 2022; hotspots that day: 5.
- Source
- NASA FIRMS · VIIRS (FRP)
- Date
- 8 Feb 2022
+− cross-check
Fire radiative power (FRP) measures the energy the fire gives off when the satellite passes. Added up by day, it compares intensity, not area.
Danger at the start
model3.2FWI · very low
Fire Weather Index (Canadian system) computed by WorldFires for the day the fire started. Consecutive days without rain before: 29.
- Source
- WorldFires calculation (Canadian FWI system)
- Date
- 8 Feb 2022, local noon
- Model
- ERA5 0,25° (ECMWF · Copernicus C3S) · Open-Meteo.com
+− cross-check
This is an index computed from weather model data, not a measurement of the fire nor an official warning. Danger warnings are issued by each country’s authority. Emergency number and official warnings
Weather during the fire
model11.7°C · 26% RH
High of 11.7 °C and minimum humidity of 26% on 8 February 2022; gusts of 33 km/h on 9 February 2022.
- Source
- weather model at the fire’s grid cell
- Date
- 8 Feb 2022 – 9 Feb 2022
- Model
- ERA5 0,25° (ECMWF · Copernicus C3S) · Open-Meteo.com
+− cross-check
These are model values for a cell of about 25 km, not from a weather station: they may differ from what was measured on the ground.
This page’s change log has been kept since 24 October 2026: every night what it publishes is compared and the difference is logged. Anything earlier is reconstructed from each source’s date and marked as reconstructed.
Show
-
· reconstructed weatherWeather and FWI computed from the ERA5 reanalysis
-
· reconstructed perimeterEFFIS (Copernicus) revises the perimeter
What was saved on 24 October 2026
Every night a snapshot of what the page shows is saved. If anything changes, it appears in the list as a log entry.
- Area
- 125 ha
- Dates
- 8 Feb 2022 – 9 Feb 2022
- Name
- Encinedo
- Official record
- —
Versioned permanent link
https://worldfires.org/en/fire/encinedo-2022-02?v=2026-10-24A version keeps the area, dates, name and official record; the area as it was logged (changes under 2% are not logged). The map, hotspots and weather always show today’s data.
Citation
A lede of about 60 words figures only, no adjectives
CSV for this fire encinedo-2022-02.csv · daily, no individual hotspots
| fecha | focos_viirs | frp_mw | tmax_c | tmin_c | hr_min_pct | viento_max_kmh | racha_max_kmh | precip_mm | fwi | clase_fwi | dentro_del_incendio |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2022-02-08 | 5 | 114 | 11.7 | -3 | 26 | 9.8 | 26.6 | 0 | 3.2 | muy_bajo | 1 |
| 2022-02-09 | 3 | 12 | 11.6 | -0.6 | 39 | 9 | 33.1 | 0 | 2.9 | muy_bajo | 1 |
| 2022-02-10 | 0 | 0 | 11 | -0.6 | 41 | 11 | 43.9 | 2.5 | 3.2 | muy_bajo | 0 |
It is generated in your browser from this page’s data: one file per fire, aggregated by day and without individual hotspots.
Live widget for your story
It updates itself while the fire is still active and links to this page. Free, with the attribution shown at the bottom.
Sources for this page: EFFIS (Copernicus), NASA FIRMS (VIIRS), ERA5 (ECMWF/Copernicus C3S) · Open-Meteo.com (CC BY 4.0). Open-Meteo.com · How we build fire pages: methodology
- Burnt area
- 125ha
- Copernicus perimeter
- Duration
- 2days
- 8 Feb 2022 – 9 Feb 2022
- Municipalities hit
- 1
- municipalities
- Started on
- 8 Feb
- 2022
- Heat detections
- 8
- in a single hotspot: 34 MW
- Danger at start
- 3
- Very low · FWI index
- Average daily power
- 64MW
- detected power per day, on average
Where it burned
HOTSPOTS BY DAY
8 Feb9 Feb
9 Feb 2022
How it evolved, day by day
8 Feb
9 Feb
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
12°high
33km/h · peak gust
26%lowest humidity
It had gone 29 days without rain (1 mm or more) when it started. Rain came after the fire: 2.5 mm on 10 Feb.
This area had burned before
No earlier perimeters overlap this fire since 2016, when the satellite record begins.
What happened to each town
-
125 ha reached on 8 Feb0.6 %
Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
What burned
- Other natural land100 %
Natura 2000 protected area affected: 100 %
- ZEPA + LIC Sierra de la Cabrera ES4190110 · ES4130024
Natura 2000 sites (European Environment Agency, 2024 release) crossed by the perimeter.
Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 8 Feb | 11.7 °C | 26 % | 27 km/h | 0.0 mm | Very low 3 |
| 9 Feb | 11.6 °C | 39 % | 33 km/h | 0.0 mm | Very low 3 |
| 10 Feb after | 11.0 °C | 41 % | 44 km/h | 2.5 mm | Very low 3 |
Its twins: fires that started in the same weather
It started with an FWI of 3.2, a minimum humidity of 26% and 29 days without rain. Fires in the area that started in weather like this since 2016: 33.
FWI at the start
3.2
Minimum humidity
26 %
Days without rain
29
this fire
chosen twins
rest of the area
Almost identicalSimilar
Outlines of the closest twins
This fire · Encinedo fire, February 2022
125 ha
2 days
FWI 3.2
Min. humidity 26 %
Pías fire, January 2019
189 ha
1 day
FWI 2.1
Min. humidity 26 %
29 km away, in 2019
First rain (1 mm or more) after it ended: none in the following ten days.
Encinedo fire, January 2019
743 ha
5 days
FWI 1.6
Min. humidity 26 %
2 km away, in 2019
First rain (1 mm or more) after it ended: 13.9 mm on 19 Jan.
Tourém fire, January 2022
189 ha
3 days
FWI 3.5
Min. humidity 24 %
107 km away, in 2022
First rain (1 mm or more) after it ended: none in the following ten days.
Pías fire, March 2021
135 ha
2 days
FWI 5.6
Min. humidity 25 %
23 km away, in 2021
First rain (1 mm or more) after it ended: 1.7 mm on 30 Mar.
A Mezquita fire, January 2019
108 ha
1 day
FWI 2.1
Min. humidity 28 %
34 km away, in 2019
First rain (1 mm or more) after it ended: none in the following ten days.
What happened to them
- 2 days
- median duration
- 172 ha
- median area
- 6 %
- went past 1,000 ha
- 3.5 mm
- rain at the end (median; 24 of 33 had it)
It burned an area similar to its twins (125 ha against a median of 172 ha) and lasted 2 days, against 2 days.
In 9 of 33, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.5 mm.
This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it
How it ended
2.5 mmfirst rain
10 Febthe day after it ended
33km/h · max. gust
It was considered over on 9 Feb, and on 10 Feb 2.5 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 24 of 33, with a median of 3.5 mm.
Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
How a twin is chosen
- Same area: fires that have already ended, less than 250 km from this one, since 2016.
- Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
- Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
- Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
- They are sorted by similarity, and the outlines of the first five are drawn.
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
↔
Before · 1 Feb 2022
After · 16 Feb 2022
Sentinel-2 did not pass over on that day. Try another date, or use false colour, which is daily.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · CopernicusOn 10 February 2022 the air beside the fire reached 19 µg/m³ of PM2.5. That day averaged 16: 1.0 times the WHO daily guideline (15).
PM2.5 peak19 µg/m³
Days over the guideline2 days
PM1050 µg/m³
WHO 15
6 Feb8 Feb10 Feb12 Feb
Good
Fair
Moderate
Poor
Very poor
Extremely poor
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table · 8Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV
Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
- 25,953 haPorto de Sanabria PortoAugust 2025 · 17 days · 4 km away
- 10,927 haEncinedoAugust 2017 · 6 days · 13 km away
- 4,416 haPuente de Domingo FlórezAugust 2025 · 9 days · 24 km away
- 12,735 haCarballeda de ValdeorrasJuly 2022 · 8 days · 25 km away
- 26,241 haLlamas de Cabrera PonferradaAugust 2025 · 14 days · 26 km away
- 37,831 haLarouco Vilamartín de ValdeorrasAugust 2025 · 15 days · 36 km away
Frequently asked questions
- How long did the Encinedo fire last?
- Copernicus dates it between 8 February 2022 and 9 February 2022: 2 days between the first and last image with fire.
- How much area did it burn?
- The perimeter Copernicus measured from satellite imagery is 125 hectares (1.2 km²). Official national figures may differ.
- Which municipalities burned?
- The fire only entered Encinedo (125 ha, 0.6 %).
- Did the fire reach a town?
- The fire started in Encinedo and came within 11.0 km of its centre. That is the distance from the perimeter, or the nearest hotspot, to the point marking the centre; it does not mean it entered the houses.
- What was the weather like?
- During the fire the temperature reached 11.7 °C, humidity dropped to 26 % and gusts hit 33 km/h. The fire danger index (FWI) reached 3, class Very low.
- Where does this data come from?
- From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Spain (geoBoundaries). It is not an official report.
- How did the fires that started in similar weather in this area end?
- Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 33. Their median duration was 2 days and their median area 172 ha; 6 % went past 1,000 ha. In 9 of 33, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.5 mm.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 112 · Emergency number and official warnings
Satellite cross-check
History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
No changes since 24 October 2026.
RSS Changes to this page With cross-checks and a citable version
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
- Dates from the perimeter: the VIIRS detections inside it did not change them. 8 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
Where this data comes from
The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.