Skip to content
worldfires
AU · Australia · –

East Pilbara fire, 5 November 2026 East Pilbara, Broome

Out · last detection

The fire started on in East Pilbara, Australia, and satellites saw it burning for 4 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 25,039 hectares from heat detections, spread across 2 municipalities.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
25,039ha
GWIS perimeter (Copernicus)
Duration
4days
5 Nov 2026 – 8 Nov 2026
Municipalities hit
2
local government areas
Started on
5 Nov
2026
Heat detections
502
in a single hotspot: 1,150 MW
Danger at start
114
Very extreme · FWI index
Average daily power
9.4GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 5 Nov8 Nov
8 Nov 2026

How it evolved, day by day

7 Nov 2026 · 17,911 MW · 465 8 Nov 2026 · 979 MW · 37
7 Nov 8 Nov

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (10 passes) and with what wind. Watch the film

The weather it burned in

43°high
56km/h · peak gust
13%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started. Rain came after the fire: 5.3 mm on 11 Nov.

This area had burned before

52% of the perimeter overlaps earlier fires recorded since 2016: 582 ha in 2017, 7,198 ha in 2018, 7,210 ha in 2023, 191 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 12,947 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 16% of the area of London (250 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. East Pilbara where it started
    24,579 ha reached on 7 Nov
    0.1 %
  2. 312 ha reached on 7 Nov
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · forecast models, provisional until the ERA5 reanalysis arrives

Started with Extreme FWI: 43 % of the area in Australia Strong wind: 39 % of the area in Australia Very dry air: 28 % of the area in Australia 60 days without rain: 8.2 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
5 Nov 43.1 °C 14 % 53 km/h 0.1 mm Very extreme 114
6 Nov 41.3 °C 16 % 28 km/h 0.0 mm Extreme 62
7 Nov 41.3 °C 17 % 41 km/h 0.3 mm Extreme 57
8 Nov 41.9 °C 13 % 56 km/h 0.7 mm Very extreme 118
9 Nov after 37.5 °C 26 % 44 km/h 0.3 mm Extreme 50
10 Nov after 36.3 °C 30 % 45 km/h 0.1 mm Extreme 68
11 Nov after 29.5 °C 57 % 55 km/h 5.3 mm High 22

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 29 Oct 2026
After · 15 Nov 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 8 November 2026 the air beside the fire reached 122 µg/m³ of PM2.5. That day averaged 48: 3.2 times the WHO daily guideline (15).

PM2.5 peak122 µg/m³
Days over the guideline2 days
PM10127 µg/m³
Optical depth1.37
3 Nov5 Nov7 Nov
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 502Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the East Pilbara fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 5 November 2026 to 8 November 2026 (4 days). The perimeter dates it from 7 November 2026 to 8 November 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 25,039 hectares (250.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: East Pilbara (24,579 ha, 0.1 %); Broome (312 ha, 0.0 %).
Is the East Pilbara fire still active?
No fire detections since 8 Nov 2026, 17:56 UTC. A lack of detections is not an official extinction.
What was the weather like?
During the fire the temperature reached 43.1 °C, humidity dropped to 13 % and gusts hit 56 km/h. The fire danger index (FWI) reached 118, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 8 November 2026.
  1. Area: 20,659 → 25,039 ha.
  2. Page published (20,659 ha).

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 7 November 2026 to 8 November 2026. 502 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: ECMWF IFS model, provisional until the ERA5 reanalysis arrives.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.