Skip to content
worldfires
AU · Australia · –

East Pilbara fire, May 2025 East Pilbara

Out · last detection 13 May 2025, 17:25 UTC

The fire started on 9 May 2025 in East Pilbara, Australia, and satellites saw it burning for 5 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 6,236 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
6,236ha
GWIS perimeter (Copernicus)
Duration
5days
9 May 2025 – 13 May 2025
Municipalities hit
1
local government areas
Started on
9 May
2025
Heat detections
243
in a single hotspot: 195 MW
Danger at start
77
Very extreme · FWI index
Average daily power
662MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 9 May13 May
13 May 2025

How it evolved, day by day

9 May 2025 · 173 MW · 33 10 May 2025 · 85 MW · 23 11 May 2025 · 1,739 MW · 106 12 May 2025 · 1,283 MW · 73 13 May 2025 · 32 MW · 8
9 May 10 May 11 May 12 May 13 May

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

31°high
44km/h · peak gust
17%lowest humidity

It had gone 49 days without rain (1 mm or more) when it started.

This area had burned before

12% of the perimeter overlaps earlier fires recorded since 2016: 429 ha in 2017, 356 ha in 2023.

How big is it?

10 km
It burned the equivalent of 3.9% of the area of London (62 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. East Pilbara where it started
    6,308 ha reached on 9 May
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 43 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
9 May 30.2 °C 21 % 44 km/h 0.0 mm Very extreme 77
10 May 30.8 °C 22 % 41 km/h 0.0 mm Very extreme 71
11 May 29.9 °C 17 % 37 km/h 0.0 mm Extreme 69
12 May 29.3 °C 18 % 38 km/h 0.0 mm Very extreme 75
13 May 29.6 °C 19 % 41 km/h 0.0 mm Very extreme 77
14 May after 29.6 °C 21 % 47 km/h 0.0 mm Very extreme 90
15 May after 27.0 °C 16 % 47 km/h 0.0 mm Very extreme 86
16 May after 25.8 °C 19 % 41 km/h 0.0 mm Very extreme 74
17 May after 25.5 °C 20 % 44 km/h 0.0 mm Very extreme 78
18 May after 24.8 °C 20 % 51 km/h 0.0 mm Very extreme 86
19 May after 24.3 °C 18 % 37 km/h 0.0 mm Extreme 66
20 May after 24.0 °C 14 % 46 km/h 0.0 mm Very extreme 81
21 May after 23.4 °C 12 % 49 km/h 0.0 mm Very extreme 92
22 May after 25.0 °C 17 % 40 km/h 0.0 mm Very extreme 75
23 May after 26.7 °C 20 % 26 km/h 0.0 mm Very high 48

Its twins: fires that started in the same weather

It started with an FWI of 77.3, a minimum humidity of 21% and 49 days without rain. Fires in the area that started in weather like this since 2017: 2.

FWI at the start 77.3
Minimum humidity 21 %
Days without rain 49
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Wiluna fire, October 2018
17,950 ha 8 days FWI 76.7 Min. humidity 20 % 163 km away, in 2018

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

Fires in the area that started in similar weather: 2. With fewer than 15 we give no figures: they would be more noise than signal.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
44km/h · max. gust

It was considered over on 13 May, and not even 1 mm fell in the following ten days: it went out without rain.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2017.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 2 May 2025
After · 20 May 2025

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 12 May 2025 the air beside the fire reached 7 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak7 µg/m³
Days over the guideline0 days
PM107 µg/m³
Optical depth0.09
7 May9 May11 May13 May15 May
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 243Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the East Pilbara fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 9 May 2025 to 13 May 2025 (5 days). The perimeter dates it from 9 May 2025 to 12 May 2025.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 6,236 hectares (62.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered East Pilbara (6,308 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 30.8 °C, humidity dropped to 17 % and gusts hit 44 km/h. The fire danger index (FWI) reached 77, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 12 May 2025 → 13 May 2025.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 9 May 2025 to 12 May 2025. 243 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.