Skip to content
worldfires
AU · Australia · –

East Pilbara fire, 1 January 2024 East Pilbara

Out · last detection 8 Jan 2024, 06:18 UTC

The fire started on 1 January 2024 in East Pilbara, Australia, and satellites saw it burning for 8 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 5,427 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
5,427ha
GWIS perimeter (Copernicus)
Duration
8days
1 Jan 2024 – 8 Jan 2024
Municipalities hit
1
local government areas
Started on
1 Jan
2024
Heat detections
220
in a single hotspot: 87 MW
Danger at start
82
Very extreme · FWI index
Average daily power
428MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 1 Jan8 Jan
8 Jan 2024

How it evolved, day by day

1 Jan 2024 · 297 MW · 20 2 Jan 2024 · 928 MW · 29 3 Jan 2024 · 110 MW · 18 4 Jan 2024 · 652 MW · 37 5 Jan 2024 · 220 MW · 38 6 Jan 2024 · 541 MW · 37 7 Jan 2024 · 311 MW · 23 8 Jan 2024 · 366 MW · 18
2 Jan 5 Jan 7 Jan

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

45°high
51km/h · peak gust
12%lowest humidity

It had gone 9 days without rain (1 mm or more) when it started.

This area had burned before

9% of the perimeter overlaps earlier fires recorded since 2016: 171 ha in 2018, 311 ha in 2022.

How big is it?

10 km
It burned the equivalent of 3.4% of the area of London (54 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. East Pilbara where it started
    5,433 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 43 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
1 Jan 42.3 °C 20 % 45 km/h 0.0 mm Very extreme 82
2 Jan 42.8 °C 22 % 43 km/h 0.9 mm Extreme 56
3 Jan 41.4 °C 19 % 51 km/h 0.0 mm Extreme 66
4 Jan 39.8 °C 18 % 37 km/h 0.0 mm Extreme 52
5 Jan 41.1 °C 18 % 38 km/h 0.0 mm Extreme 61
6 Jan 43.2 °C 14 % 42 km/h 0.0 mm Very high 47
7 Jan 44.8 °C 12 % 36 km/h 0.0 mm Extreme 59
8 Jan 42.7 °C 19 % 37 km/h 0.0 mm Very extreme 80
9 Jan after 43.9 °C 13 % 29 km/h 0.0 mm Extreme 51
10 Jan after 44.1 °C 17 % 51 km/h 0.0 mm Extreme 60
11 Jan after 41.5 °C 22 % 32 km/h 0.0 mm Extreme 59
12 Jan after 42.0 °C 21 % 42 km/h 0.0 mm Extreme 51
13 Jan after 45.6 °C 13 % 42 km/h 0.0 mm Extreme 63
14 Jan after 40.5 °C 31 % 35 km/h 0.5 mm Extreme 54
15 Jan after 42.7 °C 22 % 43 km/h 0.5 mm Very high 48
16 Jan after 41.3 °C 28 % 38 km/h 0.1 mm Very high 41
17 Jan after 39.6 °C 32 % 36 km/h 0.1 mm Extreme 58
18 Jan after 41.8 °C 26 % 42 km/h 0.7 mm Very high 43

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 25 Dec 2023
After · 15 Jan 2024

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 31 December 2023 the air beside the fire reached 31 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak31 µg/m³
Days over the guideline0 days
PM1045 µg/m³
Optical depth0.76
30 Dec2 Jan5 Jan8 Jan11 Jan
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 220Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the East Pilbara fire last?
GWIS (Copernicus) dates it between 1 January 2024 and 8 January 2024: 8 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 5,427 hectares (54.3 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered East Pilbara (5,433 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 44.8 °C, humidity dropped to 12 % and gusts hit 51 km/h. The fire danger index (FWI) reached 82, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 220 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.