Skip to content
worldfires
AU · Australia · –

East Pilbara fire, 6 September 2023 East Pilbara

Out · last detection 20 Sept 2023, 05:41 UTC

The fire started on 6 September 2023 in East Pilbara, Australia, and satellites saw it burning for 15 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 36,666 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Compare with…

Suggestions: East Pilbara · 2023East Pilbara · 2025

Burnt area
36,666ha
GWIS perimeter (Copernicus)
Duration
15days
6 Sept 2023 – 20 Sept 2023
Municipalities hit
1
local government areas
Started on
6 Sept
2023
Heat detections
1,730
in a single hotspot: 189 MW
Danger at start
46
Very high · FWI index
Average daily power
1.3GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 6 Sept20 Sept
20 Sept 2023

How it evolved, day by day

6 Sept 2023 · 2,998 MW · 200 7 Sept 2023 · 5,912 MW · 293 8 Sept 2023 · 472 MW · 87 9 Sept 2023 · 212 MW · 58 10 Sept 2023 · 238 MW · 66 11 Sept 2023 · 287 MW · 70 12 Sept 2023 · 369 MW · 127 13 Sept 2023 · 546 MW · 106 14 Sept 2023 · 329 MW · 97 15 Sept 2023 · 911 MW · 71 16 Sept 2023 · 317 MW · 81 17 Sept 2023 · 723 MW · 105 18 Sept 2023 · 4,707 MW · 318 19 Sept 2023 · 847 MW · 49 20 Sept 2023 · 20 MW · 2
7 Sept 12 Sept 15 Sept 18 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

36°high
56km/h · peak gust
10%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

18% of the perimeter overlaps earlier fires recorded since 2016: 6,560 ha in 2017, 172 ha in 2022.

How big is it?

10 km
It burned the equivalent of 23% of the area of London (367 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. East Pilbara where it started
    36,756 ha
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Very dry air: 28 % of the area in Australia 60 days without rain: 8.2 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
6 Sept 32.9 °C 13 % 29 km/h 0.0 mm Very high 46
7 Sept 31.5 °C 14 % 56 km/h 0.0 mm Very extreme 95
8 Sept 32.3 °C 12 % 48 km/h 0.0 mm Very extreme 88
9 Sept 34.4 °C 19 % 45 km/h 0.0 mm Very extreme 75
10 Sept 35.2 °C 15 % 46 km/h 0.0 mm Very extreme 83
11 Sept 35.1 °C 12 % 43 km/h 0.0 mm Very extreme 84
12 Sept 33.5 °C 11 % 48 km/h 0.0 mm Very extreme 86
13 Sept 32.6 °C 10 % 49 km/h 0.0 mm Very extreme 84
14 Sept 33.8 °C 11 % 34 km/h 0.0 mm Extreme 63
15 Sept 34.2 °C 10 % 44 km/h 0.0 mm Very extreme 85
16 Sept 34.2 °C 10 % 48 km/h 0.0 mm Very extreme 94
17 Sept 34.0 °C 13 % 38 km/h 0.0 mm Extreme 70
18 Sept 34.5 °C 13 % 38 km/h 0.0 mm Very extreme 73
19 Sept 35.4 °C 14 % 28 km/h 0.0 mm Very high 49
20 Sept 36.3 °C 13 % 24 km/h 0.0 mm Extreme 52
21 Sept after 37.7 °C 9 % 44 km/h 0.0 mm Very extreme 96
22 Sept after 37.6 °C 13 % 49 km/h 0.0 mm Very extreme 100
23 Sept after 38.0 °C 11 % 41 km/h 0.0 mm Very extreme 83
24 Sept after 38.4 °C 10 % 41 km/h 0.0 mm Very extreme 72
25 Sept after 37.7 °C 10 % 38 km/h 0.0 mm Very extreme 93
26 Sept after 37.5 °C 9 % 37 km/h 0.0 mm Very extreme 80
27 Sept after 38.2 °C 10 % 59 km/h 0.0 mm Very extreme 112
28 Sept after 37.5 °C 11 % 43 km/h 0.0 mm Very extreme 81
29 Sept after 36.9 °C 13 % 39 km/h 0.0 mm Very extreme 78
30 Sept after 38.3 °C 11 % 42 km/h 0.0 mm Very extreme 80

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 30 Aug 2023
After · 27 Sept 2023

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 13 September 2023 the air beside the fire reached 48 µg/m³ of PM2.5. That day averaged 26: 1.7 times the WHO daily guideline (15).

PM2.5 peak48 µg/m³
Days over the guideline2 days
PM1069 µg/m³
Optical depth0.82
4 Sept8 Sept12 Sept16 Sept20 Sept
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 1,730Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the East Pilbara fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 6 September 2023 to 20 September 2023 (15 days). The perimeter dates it from 6 September 2023 to 19 September 2023.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 36,666 hectares (366.7 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered East Pilbara (36,756 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 36.3 °C, humidity dropped to 10 % and gusts hit 56 km/h. The fire danger index (FWI) reached 95, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 19 September 2023 → 20 September 2023.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 6 September 2023 to 19 September 2023. 1,730 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.