Skip to content
worldfires
AU · Australia · –

East Pilbara fire, 24 May 2023 East Pilbara

Out · last detection

The fire started on in East Pilbara, Australia, and satellites saw it burning for 16 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 30,573 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
30,573ha
GWIS perimeter (Copernicus)
Duration
16days
24 May 2023 – 8 Jun 2023
Municipalities hit
1
local government areas
Started on
24 May
2023
Heat detections
1,223
in a single hotspot: 212 MW
Danger at start
58
Extreme · FWI index
Average daily power
936MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 24 May8 Jun
8 Jun 2023

How it evolved, day by day

24 May 2023 · 3,200 MW · 228 25 May 2023 · 7,474 MW · 353 26 May 2023 · 535 MW · 88 27 May 2023 · 215 MW · 83 28 May 2023 · 376 MW · 84 29 May 2023 · 220 MW · 47 30 May 2023 · 137 MW · 44 31 May 2023 · 132 MW · 49 1 Jun 2023 · 538 MW · 125 2 Jun 2023 · 560 MW · 60 3 Jun 2023 · 350 MW · 22 4 Jun 2023 · 99 MW · 19 5 Jun 2023 · 198 MW · 18 7 Jun 2023 · 1 MW · 2 8 Jun 2023 · 3 MW · 1
25 May 30 May 2 Jun 5 Jun

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

30°high
51km/h · peak gust
13%lowest humidity

It had gone 39 days without rain (1 mm or more) when it started.

This area had burned before

46% of the perimeter overlaps earlier fires recorded since 2016: 393 ha in 2017, 13,232 ha in 2018, 169 ha in 2021, 462 ha in 2022.

How big is it?

10 km
It burned the equivalent of 19% of the area of London (306 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. East Pilbara where it started
    30,404 ha
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 43 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
24 May 29.7 °C 19 % 34 km/h 0.0 mm Extreme 58
25 May 30.3 °C 13 % 36 km/h 0.0 mm Extreme 68
26 May 29.1 °C 20 % 51 km/h 0.0 mm Very extreme 78
27 May 29.1 °C 21 % 43 km/h 0.0 mm Extreme 70
28 May 26.5 °C 16 % 45 km/h 0.0 mm Very extreme 76
29 May 27.2 °C 15 % 48 km/h 0.0 mm Very extreme 82
30 May 27.9 °C 16 % 44 km/h 0.0 mm Very extreme 73
31 May 28.7 °C 16 % 34 km/h 0.0 mm Extreme 58
1 Jun 29.7 °C 17 % 27 km/h 0.0 mm Extreme 51
2 Jun 29.2 °C 21 % 19 km/h 0.0 mm Very high 42
3 Jun 29.3 °C 22 % 27 km/h 0.0 mm Very high 44
4 Jun 28.4 °C 22 % 36 km/h 0.0 mm Extreme 57
5 Jun 28.2 °C 25 % 34 km/h 0.0 mm Very high 47
6 Jun 27.5 °C 43 % 35 km/h 0.1 mm High 34
7 Jun 28.6 °C 25 % 33 km/h 0.0 mm Very high 47
8 Jun 28.7 °C 25 % 40 km/h 0.0 mm Extreme 56
9 Jun after 31.1 °C 21 % 34 km/h 0.0 mm Extreme 58
10 Jun after 32.1 °C 22 % 24 km/h 0.0 mm Very high 43
11 Jun after 31.0 °C 26 % 28 km/h 0.0 mm Very high 44
12 Jun after 30.4 °C 26 % 32 km/h 0.0 mm Extreme 50
13 Jun after 28.9 °C 19 % 43 km/h 0.0 mm Very extreme 72
14 Jun after 28.9 °C 16 % 36 km/h 0.0 mm Extreme 69
15 Jun after 28.1 °C 13 % 35 km/h 0.0 mm Extreme 66
16 Jun after 29.4 °C 13 % 30 km/h 0.0 mm Extreme 62
17 Jun after 29.4 °C 12 % 32 km/h 0.0 mm Extreme 68
18 Jun after 29.2 °C 17 % 32 km/h 0.0 mm Very extreme 73

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 17 May 2023
After · 15 Jun 2023

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 3 June 2023 the air beside the fire reached 58 µg/m³ of PM2.5. That day averaged 32: 2.1 times the WHO daily guideline (15).

PM2.5 peak58 µg/m³
Days over the guideline3 days
PM1084 µg/m³
Optical depth0.35
22 May26 May30 May3 Jun7 Jun
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 1,223Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the East Pilbara fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 24 May 2023 to 8 June 2023 (16 days). The perimeter dates it from 24 May 2023 to 5 June 2023.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 30,573 hectares (305.7 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered East Pilbara (30,404 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 30.3 °C, humidity dropped to 13 % and gusts hit 51 km/h. The fire danger index (FWI) reached 82, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 5 June 2023 → 8 June 2023.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 24 May 2023 to 5 June 2023. 1,223 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.