Skip to content
worldfires
AU · Australia · –

East Pilbara fire, 10 March 2023 East Pilbara

Out · last detection

The fire started on in East Pilbara, Australia, and satellites saw it burning for 6 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 5,893 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
5,893ha
GWIS perimeter (Copernicus)
Duration
6days
10 Mar 2023 – 15 Mar 2023
Municipalities hit
1
local government areas
Started on
10 Mar
2023
Heat detections
145
in a single hotspot: 153 MW
Danger at start
56
Extreme · FWI index
Average daily power
636MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 10 Mar15 Mar
15 Mar 2023

How it evolved, day by day

11 Mar 2023 · 2,824 MW · 88 12 Mar 2023 · 78 MW · 22 13 Mar 2023 · 53 MW · 20 14 Mar 2023 · 168 MW · 9 15 Mar 2023 · 58 MW · 6
11 Mar 12 Mar 13 Mar 14 Mar 15 Mar

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

40°high
28km/h · peak gust
11%lowest humidity

It had gone 11 days without rain (1 mm or more) when it started.

This area had burned before

22% of the perimeter overlaps earlier fires recorded since 2016: 1,308 ha in 2017.

How big is it?

10 km
It burned the equivalent of 3.7% of the area of London (59 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. East Pilbara where it started
    5,873 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 43 % of the area in Australia Very dry air: 28 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
10 Mar 38.1 °C 11 % 28 km/h 0.0 mm Extreme 56
11 Mar 39.1 °C 13 % 28 km/h 0.0 mm Extreme 56
12 Mar 39.0 °C 18 % 26 km/h 0.0 mm Very high 44
13 Mar 39.1 °C 21 % 20 km/h 0.0 mm Very high 47
14 Mar 40.0 °C 18 % 26 km/h 0.0 mm Extreme 53
15 Mar 39.9 °C 17 % 25 km/h 0.0 mm Very high 49
16 Mar after 39.7 °C 17 % 32 km/h 0.0 mm Extreme 55
17 Mar after 40.4 °C 21 % 32 km/h 0.0 mm Extreme 55
18 Mar after 40.5 °C 21 % 37 km/h 0.0 mm Extreme 64
19 Mar after 39.6 °C 20 % 27 km/h 0.3 mm Extreme 54
20 Mar after 38.8 °C 25 % 36 km/h 0.0 mm Extreme 61
21 Mar after 37.7 °C 25 % 44 km/h 0.1 mm Very extreme 76
22 Mar after 38.4 °C 21 % 39 km/h 0.0 mm Extreme 62
23 Mar after 37.2 °C 30 % 34 km/h 0.0 mm Very high 50
24 Mar after 38.2 °C 28 % 32 km/h 0.2 mm Extreme 60
25 Mar after 37.8 °C 23 % 39 km/h 0.0 mm Extreme 60

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 3 Mar 2023
After · 22 Mar 2023

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 11 March 2023 the air beside the fire reached 153 µg/m³ of PM2.5. That day averaged 79: 5.3 times the WHO daily guideline (15).

PM2.5 peak153 µg/m³
Days over the guideline8 days
PM10219 µg/m³
Optical depth0.96
9 Mar11 Mar13 Mar15 Mar17 Mar
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 145Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the East Pilbara fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 10 March 2023 to 15 March 2023 (6 days). The perimeter dates it from 11 March 2023 to 15 March 2023.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 5,893 hectares (58.9 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered East Pilbara (5,873 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 40.0 °C, humidity dropped to 11 % and gusts hit 28 km/h. The fire danger index (FWI) reached 56, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 11 March 2023 → 10 March 2023.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 11 March 2023 to 15 March 2023. 145 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.