Skip to content
worldfires
AU · Australia · –

East Pilbara fire, 10 October 2018 East Pilbara

Out · last detection 18 Oct 2018, 05:53 UTC

The fire started on 10 October 2018 in East Pilbara, Australia, and satellites saw it burning for 9 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 19,487 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
19,487ha
GWIS perimeter (Copernicus)
Duration
9days
10 Oct 2018 – 18 Oct 2018
Municipalities hit
1
local government areas
Started on
10 Oct
2018
Heat detections
625
in a single hotspot: 464 MW
Danger at start
63
Extreme · FWI index
Average daily power
2.5GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 10 Oct18 Oct
18 Oct 2018

How it evolved, day by day

10 Oct 2018 · 1,602 MW · 100 11 Oct 2018 · 1,302 MW · 80 12 Oct 2018 · 16,455 MW · 220 13 Oct 2018 · 1,226 MW · 87 14 Oct 2018 · 770 MW · 93 15 Oct 2018 · 351 MW · 30 16 Oct 2018 · 14 MW · 2 17 Oct 2018 · 348 MW · 8 18 Oct 2018 · 71 MW · 5
10 Oct 12 Oct 14 Oct 16 Oct 18 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

38°high
54km/h · peak gust
7%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 12% of the area of London (195 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. East Pilbara where it started
    19,666 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 43 % of the area in Australia 60 days without rain: 8.2 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
10 Oct 35.0 °C 15 % 36 km/h 0.5 mm Extreme 63
11 Oct 36.4 °C 17 % 45 km/h 0.0 mm Very extreme 90
12 Oct 37.5 °C 10 % 44 km/h 0.0 mm Very extreme 76
13 Oct 37.7 °C 12 % 49 km/h 0.0 mm Very extreme 102
14 Oct 36.2 °C 10 % 54 km/h 0.0 mm Very extreme 101
15 Oct 31.4 °C 14 % 48 km/h 0.0 mm Very extreme 80
16 Oct 33.2 °C 9 % 49 km/h 0.0 mm Very extreme 93
17 Oct 35.3 °C 7 % 42 km/h 0.0 mm Very extreme 78
18 Oct 38.2 °C 9 % 51 km/h 0.0 mm Very extreme 96
19 Oct after 32.8 °C 19 % 51 km/h 0.0 mm Very extreme 75
20 Oct after 35.0 °C 11 % 41 km/h 0.0 mm Extreme 65
21 Oct after 39.4 °C 9 % 39 km/h 0.0 mm Extreme 68
22 Oct after 38.2 °C 7 % 50 km/h 0.0 mm Very extreme 79
23 Oct after 38.7 °C 7 % 35 km/h 0.0 mm Extreme 63
24 Oct after 39.9 °C 7 % 62 km/h 0.0 mm Very extreme 139
25 Oct after 34.5 °C 12 % 60 km/h 0.5 mm Very extreme 122
26 Oct after 33.0 °C 14 % 43 km/h 0.0 mm Very extreme 78
27 Oct after 34.2 °C 17 % 30 km/h 0.0 mm Extreme 54
28 Oct after 35.7 °C 17 % 42 km/h 0.0 mm Very extreme 74

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 3 Oct 2018
After · 25 Oct 2018

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 625Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the East Pilbara fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 10 October 2018 to 18 October 2018 (9 days). The perimeter dates it from 10 October 2018 to 15 October 2018.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 19,487 hectares (194.9 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered East Pilbara (19,666 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 38.2 °C, humidity dropped to 7 % and gusts hit 54 km/h. The fire danger index (FWI) reached 102, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 15 October 2018 → 18 October 2018.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 10 October 2018 to 15 October 2018. 625 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.