Skip to content
worldfires
AU · Australia · –

East Pilbara fire, 20 September 2018 East Pilbara

Out · last detection 1 Oct 2018, 17:23 UTC

The fire started on 20 September 2018 in East Pilbara, Australia, and satellites saw it burning for 12 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 12,032 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
12,032ha
GWIS perimeter (Copernicus)
Duration
12days
20 Sept 2018 – 1 Oct 2018
Municipalities hit
1
local government areas
Started on
20 Sept
2018
Heat detections
373
in a single hotspot: 164 MW
Danger at start
90
Very extreme · FWI index
Average daily power
401MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 20 Sept1 Oct
1 Oct 2018

How it evolved, day by day

21 Sept 2018 · 191 MW · 39 22 Sept 2018 · 136 MW · 17 23 Sept 2018 · 1,210 MW · 49 24 Sept 2018 · 504 MW · 61 25 Sept 2018 · 264 MW · 58 26 Sept 2018 · 857 MW · 94 27 Sept 2018 · 191 MW · 20 28 Sept 2018 · 217 MW · 24 29 Sept 2018 · 403 MW · 6 1 Oct 2018 · 39 MW · 5
21 Sept 23 Sept 25 Sept 27 Sept 29 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

38°high
56km/h · peak gust
6%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started. Rain came after the fire: 4.9 mm on 10 Oct.

This area had burned before

7% of the perimeter overlaps earlier fires recorded since 2016: 285 ha in 2016, 544 ha in 2017.

How big is it?

10 km
It burned the equivalent of 7.6% of the area of London (120 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. East Pilbara where it started
    11,960 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 43 % of the area in Australia Strong wind: 39 % of the area in Australia 60 days without rain: 8.2 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
20 Sept 27.7 °C 19 % 56 km/h 1.6 mm Very extreme 90
21 Sept 32.2 °C 15 % 45 km/h 0.0 mm Extreme 69
22 Sept 34.3 °C 10 % 50 km/h 0.0 mm Very extreme 89
23 Sept 35.2 °C 9 % 39 km/h 0.0 mm Very extreme 82
24 Sept 36.5 °C 9 % 40 km/h 0.0 mm Very extreme 84
25 Sept 37.0 °C 8 % 42 km/h 0.0 mm Very extreme 87
26 Sept 36.9 °C 6 % 38 km/h 0.0 mm Very extreme 86
27 Sept 37.1 °C 9 % 44 km/h 0.0 mm Very extreme 95
28 Sept 36.5 °C 11 % 26 km/h 0.0 mm Extreme 67
29 Sept 38.2 °C 13 % 37 km/h 0.0 mm Very extreme 88
30 Sept 37.1 °C 15 % 37 km/h 0.0 mm Extreme 67
1 Oct 37.4 °C 14 % 40 km/h 0.0 mm Extreme 66
2 Oct after 38.9 °C 12 % 34 km/h 0.0 mm Extreme 64
3 Oct after 39.8 °C 13 % 39 km/h 0.0 mm Very extreme 78
4 Oct after 39.0 °C 16 % 36 km/h 0.0 mm Extreme 62
5 Oct after 39.6 °C 16 % 38 km/h 0.0 mm Very extreme 70
6 Oct after 40.2 °C 13 % 41 km/h 0.0 mm Extreme 67
7 Oct after 41.4 °C 11 % 48 km/h 0.0 mm Very extreme 78
8 Oct after 41.1 °C 11 % 48 km/h 0.0 mm Very extreme 104
9 Oct after 40.7 °C 12 % 40 km/h 0.0 mm Very extreme 80
10 Oct after 38.5 °C 18 % 35 km/h 4.9 mm Extreme 67

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 13 Sept 2018
After · 8 Oct 2018

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 373Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the East Pilbara fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 20 September 2018 to 1 October 2018 (12 days). The perimeter dates it from 20 September 2018 to 30 September 2018.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 12,032 hectares (120.3 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered East Pilbara (11,960 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 38.2 °C, humidity dropped to 6 % and gusts hit 56 km/h. The fire danger index (FWI) reached 95, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 30 September 2018 → 1 October 2018.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 20 September 2018 to 30 September 2018. 373 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.