Skip to content
worldfires
AU · Australia · –

East Pilbara fire, 6 November 2017 Ashburton, East Pilbara

Out · last detection 12 Nov 2017, 05:28 UTC

The fire started on 6 November 2017 in East Pilbara, Australia, and satellites saw it burning for 7 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 11,015 hectares from heat detections, spread across 2 municipalities.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Compare with…
Burnt area
11,015ha
GWIS perimeter (Copernicus)
Duration
7days
6 Nov 2017 – 12 Nov 2017
Municipalities hit
2
local government areas
Started on
6 Nov
2017
Heat detections
412
in a single hotspot: 258 MW
Danger at start
55
Extreme · FWI index
Average daily power
922MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 6 Nov12 Nov
12 Nov 2017

How it evolved, day by day

6 Nov 2017 · 223 MW · 51 7 Nov 2017 · 271 MW · 20 8 Nov 2017 · 698 MW · 119 9 Nov 2017 · 4,550 MW · 163 10 Nov 2017 · 572 MW · 22 11 Nov 2017 · 108 MW · 32 12 Nov 2017 · 32 MW · 5
6 Nov 9 Nov 12 Nov

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

36°high
53km/h · peak gust
6%lowest humidity

It had gone 59 days without rain (1 mm or more) when it started.

This area had burned before

2% of the perimeter overlaps earlier fires recorded since 2016: 196 ha in 2016.

How big is it?

10 km
It burned the equivalent of 7% of the area of London (110 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. 9,631 ha
    0.1 %
  2. East Pilbara where it started
    1,475 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area2.8 ha
Residents≈ 100

Inside the perimeter there were about 2.8 hectares of built-up land and about 100 residents (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 43 % of the area in Australia Strong wind: 39 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
6 Nov 33.0 °C 18 % 53 km/h 1.9 mm Extreme 55
7 Nov 34.3 °C 18 % 40 km/h 0.0 mm Extreme 58
8 Nov 34.4 °C 14 % 45 km/h 0.0 mm Extreme 68
9 Nov 35.6 °C 10 % 47 km/h 0.0 mm Very extreme 76
10 Nov 35.6 °C 10 % 37 km/h 0.0 mm Extreme 56
11 Nov 35.5 °C 6 % 43 km/h 0.0 mm Very extreme 82
12 Nov 35.3 °C 8 % 42 km/h 0.0 mm Very extreme 78
13 Nov after 36.5 °C 8 % 46 km/h 0.0 mm Extreme 65
14 Nov after 36.8 °C 15 % 41 km/h 0.0 mm Very extreme 77
15 Nov after 35.3 °C 10 % 40 km/h 0.0 mm Very extreme 87
16 Nov after 36.0 °C 11 % 51 km/h 0.0 mm Very extreme 99
17 Nov after 36.1 °C 18 % 65 km/h 0.0 mm Very extreme 111
18 Nov after 37.0 °C 17 % 59 km/h 0.0 mm Very extreme 86
19 Nov after 38.4 °C 13 % 37 km/h 0.0 mm Extreme 66
20 Nov after 39.6 °C 10 % 32 km/h 0.0 mm Extreme 63
21 Nov after 39.5 °C 11 % 43 km/h 0.0 mm Extreme 66
22 Nov after 38.8 °C 13 % 53 km/h 0.0 mm Very extreme 90

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 30 Oct 2017
After · 19 Nov 2017

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 412Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the East Pilbara fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 6 November 2017 to 12 November 2017 (7 days). The perimeter dates it from 6 November 2017 to 10 November 2017.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 11,015 hectares (110.2 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Ashburton (9,631 ha, 0.1 %); East Pilbara (1,475 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 35.6 °C, humidity dropped to 6 % and gusts hit 53 km/h. The fire danger index (FWI) reached 82, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 10 November 2017 → 12 November 2017.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 6 November 2017 to 10 November 2017. 412 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.