Skip to content
worldfires
UG · Uganda · –

East Moyo fire, 11 December 2017 East Moyo

Out · last detection 21 Dec 2017, 11:49 UTC

The fire started on 11 December 2017 in East Moyo, Uganda, and satellites saw it burning for 11 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 1,239 hectares from heat detections, spread across a single municipality.

It is the 617th largest in Northern Region since 2016 (of 1003 with a page). Number 161 in Uganda in 2017, of 244.

The power measured by the satellite is low (16.4 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
1,239ha
GWIS perimeter (Copernicus)
Duration
11days
11 Dec 2017 – 21 Dec 2017
Municipalities hit
1
counties
Started on
11 Dec
2017
Heat detections
42
in a single hotspot: 16 MW
Danger at start
33
High · FWI index
Average daily power
38MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 11 Dec21 Dec
21 Dec 2017

How it evolved, day by day

11 Dec 2017 · 71 MW · 9 12 Dec 2017 · 62 MW · 11 13 Dec 2017 · 20 MW · 4 14 Dec 2017 · 46 MW · 9 19 Dec 2017 · 26 MW · 3 20 Dec 2017 · 31 MW · 4 21 Dec 2017 · 10 MW · 2
11 Dec 13 Dec 19 Dec 21 Dec

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

34°high
41km/h · peak gust
20%lowest humidity

It had gone 11 days without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 0.8% of the area of London (12 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. East Moyo where it started
    1,247 ha reached on 11 Dec
    0.4 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area3.4 ha
Residents≈ 350

Inside the perimeter there were about 3.4 hectares of built-up land and about 350 residents (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
11 Dec 32.8 °C 27 % 27 km/h 0.0 mm High 33
12 Dec 33.4 °C 25 % 25 km/h 0.0 mm High 34
13 Dec 33.5 °C 20 % 26 km/h 0.0 mm Very high 39
14 Dec 33.1 °C 26 % 26 km/h 0.0 mm Very high 39
15 Dec 33.2 °C 22 % 17 km/h 0.0 mm High 30
16 Dec 33.2 °C 26 % 24 km/h 0.0 mm High 33
17 Dec 32.1 °C 29 % 29 km/h 0.0 mm High 32
18 Dec 33.5 °C 29 % 35 km/h 0.0 mm Very high 38
19 Dec 32.7 °C 32 % 37 km/h 0.0 mm Very high 40
20 Dec 33.3 °C 25 % 41 km/h 0.0 mm Very high 45
21 Dec 34.2 °C 23 % 36 km/h 0.0 mm Very high 46
22 Dec after 33.5 °C 22 % 34 km/h 0.0 mm Very high 45
23 Dec after 32.2 °C 28 % 24 km/h 0.0 mm Very high 38
24 Dec after 33.0 °C 27 % 23 km/h 0.0 mm Very high 38
25 Dec after 33.4 °C 21 % 20 km/h 0.0 mm High 31
26 Dec after 32.2 °C 31 % 19 km/h 0.0 mm High 30
27 Dec after 32.6 °C 24 % 34 km/h 0.0 mm Very high 44
28 Dec after 32.6 °C 30 % 30 km/h 0.0 mm Very high 41
29 Dec after 32.9 °C 26 % 17 km/h 0.0 mm High 32
30 Dec after 33.8 °C 21 % 18 km/h 0.0 mm High 29
31 Dec after 32.6 °C 30 % 21 km/h 0.0 mm High 28

Its twins: fires that started in the same weather

It started with an FWI of 32.6, a minimum humidity of 27% and 11 days without rain. Fires in the area that started in weather like this since 2016: 16.

FWI at the start 32.6
Minimum humidity 27 %
Days without rain 11
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

East Moyo fire, January 2016
3,010 ha 11 days FWI 33.3 Min. humidity 27 % 31 km away, in 2016

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

11 days
median duration
1,870 ha
median area
100 %
went past 1,000 ha
4.4 mm
rain at the end (median; 3 of 16 had it)

It stayed below its twins: 1,239 ha against a median of 1,870 ha. It lasted 11 days, against 11 days.

In 13 of 16, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.4 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
41km/h · max. gust

It was considered over on 21 Dec, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 3 of 16, with a median of 4.4 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 4 Dec 2017
After · 28 Dec 2017

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 42Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Uganda

Frequently asked questions

How long did the East Moyo fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 11 December 2017 to 21 December 2017 (11 days). The perimeter dates it from 11 December 2017 to 14 December 2017.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 1,239 hectares (12.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered East Moyo (1,247 ha, 0.4 %).
What was the weather like?
During the fire the temperature reached 34.2 °C, humidity dropped to 20 % and gusts hit 41 km/h. The fire danger index (FWI) reached 46, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Uganda (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 16. Their median duration was 11 days and their median area 1,870 ha; 100 % went past 1,000 ha. In 13 of 16, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.4 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 999 · 112 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 14 December 2017 → 21 December 2017.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 999 · 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 11 December 2017 to 14 December 2017. 42 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.