Skip to content
worldfires
AU · Australia · –

East Arnhem fire, 7 October 2026 East Arnhem

Out · last detection 29 Oct 2026, 04:51 UTC

The fire started on 7 October 2026 in East Arnhem, Australia, and satellites saw it burning for 23 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 6,501 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
6,501ha
GWIS perimeter (Copernicus)
Duration
23days
7 Oct 2026 – 29 Oct 2026
Municipalities hit
1
local government areas
Started on
7 Oct
2026
Heat detections
106
in a single hotspot: 68 MW
Danger at start
44
Very high · FWI index
Average daily power
74MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 7 Oct29 Oct
29 Oct 2026

How it evolved, day by day

10 Oct 2026 · 0 MW · 0 11 Oct 2026 · 14 MW · 2 12 Oct 2026 · 259 MW · 16 13 Oct 2026 · 0 MW · 0 14 Oct 2026 · 247 MW · 11 15 Oct 2026 · 31 MW · 4 16 Oct 2026 · 42 MW · 5 17 Oct 2026 · 11 MW · 3 18 Oct 2026 · 2 MW · 1 19 Oct 2026 · 273 MW · 22 20 Oct 2026 · 39 MW · 6 21 Oct 2026 · 87 MW · 14 22 Oct 2026 · 29 MW · 4 23 Oct 2026 · 0 MW · 0 24 Oct 2026 · 73 MW · 3 25 Oct 2026 · 115 MW · 7 26 Oct 2026 · 1 MW · 2 27 Oct 2026 · 15 MW · 2 28 Oct 2026 · 11 MW · 2 29 Oct 2026 · 17 MW · 2
10 Oct 14 Oct 19 Oct 22 Oct 26 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

38°high
46km/h · peak gust
22%lowest humidity

It had gone 6 days without rain (1 mm or more) when it started.

This area had burned before

75% of the perimeter overlaps earlier fires recorded since 2016: 2,550 ha in 2016, 270 ha in 2018, 781 ha in 2019, 1,777 ha in 2020, 803 ha in 2021, 1,904 ha in 2022, 515 ha in 2023, 2,876 ha in 2024, 1,162 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 4,871 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 4.1% of the area of London (65 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. East Arnhem where it started
    6,549 ha reached on 10 Oct
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
7 Oct 35.8 °C 22 % 39 km/h 0.0 mm Very high 44
8 Oct 36.0 °C 27 % 32 km/h 0.0 mm Very high 41
9 Oct 36.6 °C 28 % 28 km/h 0.1 mm Very high 40
10 Oct 36.2 °C 27 % 37 km/h 0.0 mm Very high 44
11 Oct 35.3 °C 36 % 40 km/h 0.0 mm Extreme 51
12 Oct 37.1 °C 29 % 43 km/h 0.0 mm Very high 46
13 Oct 36.9 °C 29 % 41 km/h 0.0 mm Very high 43
14 Oct 36.4 °C 28 % 41 km/h 0.0 mm Very high 46
15 Oct 35.8 °C 34 % 41 km/h 0.1 mm Extreme 53
16 Oct 36.5 °C 30 % 41 km/h 0.0 mm Very high 48
17 Oct 36.0 °C 32 % 36 km/h 0.0 mm Very high 44
18 Oct 36.8 °C 32 % 36 km/h 0.1 mm Very high 43
19 Oct 36.4 °C 28 % 46 km/h 0.0 mm Very high 50
20 Oct 36.9 °C 27 % 44 km/h 0.0 mm Extreme 55
21 Oct 35.2 °C 41 % 40 km/h 0.6 mm Very high 43
22 Oct 37.2 °C 28 % 31 km/h 0.1 mm Very high 40
23 Oct 36.7 °C 29 % 32 km/h 0.0 mm High 36
24 Oct 36.5 °C 33 % 31 km/h 0.0 mm Very high 41
25 Oct 37.4 °C 28 % 35 km/h 0.0 mm Very high 43
26 Oct 36.9 °C 32 % 35 km/h 0.0 mm High 38
27 Oct 38.2 °C 30 % 31 km/h 0.1 mm Very high 39
28 Oct 37.0 °C 37 % 38 km/h 1.0 mm Very high 41
29 Oct 36.7 °C 34 % 36 km/h 0.1 mm High 34
30 Oct after 35.8 °C 35 % 38 km/h 0.3 mm Very high 43
31 Oct after 37.9 °C 28 % 37 km/h 0.0 mm Very high 42
1 Nov after 37.4 °C 31 % 32 km/h 0.0 mm Very high 45
2 Nov after 38.2 °C 31 % 35 km/h 0.2 mm Very high 42
3 Nov after 39.2 °C 26 % 31 km/h 0.0 mm Very high 43
4 Nov after 38.3 °C 29 % 30 km/h 0.0 mm Very high 41
5 Nov after 37.9 °C 32 % 32 km/h 0.4 mm High 36
6 Nov after 38.5 °C 29 % 31 km/h 0.0 mm Very high 45
7 Nov after 38.4 °C 32 % 37 km/h 0.1 mm Very high 48
8 Nov after 38.2 °C 29 % 38 km/h 0.0 mm Very high 48

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 30 Sept 2026
After · 5 Nov 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 13 October 2026 the air beside the fire reached 24 µg/m³ of PM2.5. That day averaged 16: 1.1 times the WHO daily guideline (15).

PM2.5 peak24 µg/m³
Days over the guideline1 day
PM1025 µg/m³
Optical depth0.35
8 Oct11 Oct14 Oct17 Oct20 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 106Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the East Arnhem fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 7 October 2026 to 29 October 2026 (23 days). The perimeter dates it from 10 October 2026 to 29 October 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 6,501 hectares (65.0 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered East Arnhem (6,549 ha, 0.2 %).
Is the East Arnhem fire still active?
No fire detections since 29 Oct 2026, 04:51 UTC. A lack of detections is not an official extinction.
What was the weather like?
During the fire the temperature reached 38.2 °C, humidity dropped to 22 % and gusts hit 46 km/h. The fire danger index (FWI) reached 55, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 4 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 24 October 2026 → 29 October 2026.
  2. Area: 6,198 → 6,416 ha.
  3. Area: 5,900 → 6,198 ha.
  4. Area: 5,760 → 5,900 ha.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 10 October 2026 to 29 October 2026. 106 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.