Skip to content
worldfires
AU · Australia · –

East Arnhem fire, 6 September 2026 East Arnhem

Out · last detection

The fire started on in East Arnhem, Australia, and satellites saw it burning for 29 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 8,762 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

The power measured by the satellite is low (26.9 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
8,762ha
GWIS perimeter (Copernicus)
Duration
29days
6 Sept 2026 – 4 Oct 2026
Municipalities hit
1
local government areas
Started on
6 Sept
2026
Heat detections
183
in a single hotspot: 27 MW
Danger at start
28
High · FWI index
Average daily power
59MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 6 Sept4 Oct
4 Oct 2026

How it evolved, day by day

7 Sept 2026 · 66 MW · 3 8 Sept 2026 · 2 MW · 1 9 Sept 2026 · 28 MW · 3 10 Sept 2026 · 22 MW · 4 12 Sept 2026 · 2 MW · 1 14 Sept 2026 · 29 MW · 8 15 Sept 2026 · 14 MW · 2 16 Sept 2026 · 98 MW · 9 17 Sept 2026 · 1 MW · 1 18 Sept 2026 · 280 MW · 51 19 Sept 2026 · 122 MW · 21 20 Sept 2026 · 171 MW · 19 21 Sept 2026 · 8 MW · 2 22 Sept 2026 · 116 MW · 13 23 Sept 2026 · 136 MW · 17 25 Sept 2026 · 2 MW · 3 26 Sept 2026 · 1 MW · 1 27 Sept 2026 · 1 MW · 1 30 Sept 2026 · 2 MW · 2 1 Oct 2026 · 36 MW · 6 2 Oct 2026 · 111 MW · 15 4 Oct 2026 · 0 MW · 0
7 Sept 14 Sept 18 Sept 25 Sept 2 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (32 passes) and with what wind. Watch the film

The weather it burned in

31°high
56km/h · peak gust
38%lowest humidity

It had gone 3 days without rain (1 mm or more) when it started.

This area had burned before

94% of the perimeter overlaps earlier fires recorded since 2016: 3,060 ha in 2016, 1,089 ha in 2017, 5,404 ha in 2018, 3,950 ha in 2019, 7,344 ha in 2020, 2,830 ha in 2021, 4,822 ha in 2022, 1,543 ha in 2023, 6,116 ha in 2024, 2,303 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 8,229 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 5.5% of the area of London (88 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. East Arnhem where it started
    8,690 ha reached on 7 Sept
    0.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
6 Sept 30.1 °C 43 % 30 km/h 0.0 mm High 28
7 Sept 30.5 °C 42 % 31 km/h 0.0 mm High 28
8 Sept 31.2 °C 38 % 33 km/h 0.0 mm High 27
9 Sept 30.0 °C 54 % 36 km/h 0.5 mm High 31
10 Sept 30.5 °C 47 % 43 km/h 0.1 mm High 33
11 Sept 29.0 °C 50 % 52 km/h 0.4 mm Very high 40
12 Sept 29.4 °C 49 % 53 km/h 0.1 mm Very high 42
13 Sept 29.0 °C 52 % 50 km/h 0.7 mm High 31
14 Sept 29.2 °C 47 % 47 km/h 0.1 mm High 35
15 Sept 29.5 °C 49 % 49 km/h 0.1 mm High 38
16 Sept 29.7 °C 47 % 44 km/h 0.1 mm High 36
17 Sept 30.4 °C 40 % 47 km/h 0.0 mm Very high 41
18 Sept 29.1 °C 44 % 56 km/h 0.0 mm Very high 46
19 Sept 28.3 °C 51 % 53 km/h 0.2 mm Very high 44
20 Sept 27.7 °C 62 % 42 km/h 0.6 mm High 28
21 Sept 29.3 °C 47 % 32 km/h 0.2 mm High 29
22 Sept 29.1 °C 49 % 35 km/h 0.0 mm High 30
23 Sept 29.3 °C 49 % 36 km/h 0.7 mm High 32
24 Sept 28.8 °C 55 % 40 km/h 1.7 mm High 26
25 Sept 27.8 °C 60 % 40 km/h 1.4 mm Moderate 12
26 Sept 29.7 °C 56 % 46 km/h 0.8 mm High 22
27 Sept 29.7 °C 51 % 52 km/h 0.8 mm High 24
28 Sept 29.1 °C 52 % 48 km/h 0.3 mm High 27
29 Sept 28.9 °C 60 % 48 km/h 1.6 mm High 24
30 Sept 28.9 °C 61 % 46 km/h 2.0 mm Moderate 21
1 Oct 29.5 °C 61 % 41 km/h 1.5 mm Low 10
2 Oct 28.6 °C 58 % 50 km/h 1.3 mm Moderate 18
3 Oct 27.8 °C 58 % 41 km/h 1.3 mm High 24
4 Oct 28.1 °C 67 % 36 km/h 1.9 mm Moderate 15
5 Oct after 29.3 °C 55 % 33 km/h 0.5 mm Moderate 12
6 Oct after 30.4 °C 51 % 32 km/h 0.0 mm High 23
7 Oct after 31.7 °C 42 % 32 km/h 0.0 mm High 28
8 Oct after 31.8 °C 47 % 31 km/h 0.0 mm High 28
9 Oct after 30.8 °C 53 % 32 km/h 0.0 mm High 29
10 Oct after 30.7 °C 51 % 39 km/h 0.0 mm High 33
11 Oct after 31.5 °C 54 % 45 km/h 0.0 mm High 34
12 Oct after 31.8 °C 49 % 42 km/h 0.0 mm High 35
13 Oct after 32.2 °C 47 % 34 km/h 0.0 mm High 32
14 Oct after 32.1 °C 46 % 38 km/h 0.0 mm High 34

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 30 Aug 2026
After · 11 Oct 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 7 September 2026 the air beside the fire reached 35 µg/m³ of PM2.5. That day averaged 21: 1.4 times the WHO daily guideline (15).

PM2.5 peak35 µg/m³
Days over the guideline2 days
PM1037 µg/m³
Optical depth0.60
4 Sept11 Sept18 Sept25 Sept2 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 183Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the East Arnhem fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 6 September 2026 to 4 October 2026 (29 days). The perimeter dates it from 12 September 2026 to 27 September 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 8,762 hectares (87.6 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered East Arnhem (8,690 ha, 0.3 %).
What was the weather like?
During the fire the temperature reached 31.2 °C, humidity dropped to 38 % and gusts hit 56 km/h. The fire danger index (FWI) reached 46, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 12 September 2026 to 27 September 2026. 183 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.