Skip to content
worldfires
AU · Australia · –

East Arnhem fire, 13 August 2026 East Arnhem

Out · last detection 19 Sept 2026, 16:30 UTC

The fire started on 13 August 2026 in East Arnhem, Australia, and satellites saw it burning for 38 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 10,046 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
10,046ha
GWIS perimeter (Copernicus)
Duration
38days
13 Aug 2026 – 19 Sept 2026
Municipalities hit
1
local government areas
Started on
13 Aug
2026
Heat detections
301
in a single hotspot: 42 MW
Danger at start
37
High · FWI index
Average daily power
80MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 13 Aug19 Sept
19 Sept 2026

How it evolved, day by day

13 Aug 2026 · 22 MW · 6 14 Aug 2026 · 9 MW · 1 15 Aug 2026 · 13 MW · 3 16 Aug 2026 · 8 MW · 1 17 Aug 2026 · 15 MW · 5 18 Aug 2026 · 33 MW · 12 19 Aug 2026 · 31 MW · 5 21 Aug 2026 · 70 MW · 14 22 Aug 2026 · 45 MW · 5 24 Aug 2026 · 5 MW · 2 25 Aug 2026 · 37 MW · 5 26 Aug 2026 · 315 MW · 16 27 Aug 2026 · 59 MW · 8 28 Aug 2026 · 257 MW · 19 29 Aug 2026 · 86 MW · 24 30 Aug 2026 · 135 MW · 21 31 Aug 2026 · 59 MW · 4 4 Sept 2026 · 19 MW · 3 5 Sept 2026 · 25 MW · 4 6 Sept 2026 · 25 MW · 5 7 Sept 2026 · 27 MW · 3 8 Sept 2026 · 38 MW · 8 9 Sept 2026 · 15 MW · 4 10 Sept 2026 · 74 MW · 13 12 Sept 2026 · 150 MW · 21 13 Sept 2026 · 188 MW · 23 14 Sept 2026 · 513 MW · 50 15 Sept 2026 · 90 MW · 12 16 Sept 2026 · 30 MW · 3 19 Sept 2026 · 3 MW · 1
13 Aug 19 Aug 27 Aug 5 Sept 14 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (51 passes) and with what wind. Watch the film

The weather it burned in

32°high
54km/h · peak gust
35%lowest humidity

It had gone 35 days without rain (1 mm or more) when it started. Rain came after the fire: 1.1 mm on 20 Sept.

This area had burned before

89% of the perimeter overlaps earlier fires recorded since 2016: 4,000 ha in 2016, 2,428 ha in 2017, 4,738 ha in 2018, 29 ha in 2019, 5,003 ha in 2020, 1,548 ha in 2021, 22 ha in 2022, 2,469 ha in 2023, 1,596 ha in 2024, 4 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 8,941 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 6.3% of the area of London (100 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. East Arnhem where it started
    10,021 ha reached on 13 Aug
    0.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
13 Aug 29.6 °C 55 % 45 km/h 0.0 mm High 37
14 Aug 29.9 °C 49 % 43 km/h 0.0 mm High 37
15 Aug 29.2 °C 52 % 38 km/h 0.0 mm High 34
16 Aug 29.1 °C 46 % 42 km/h 0.0 mm High 35
17 Aug 28.2 °C 53 % 46 km/h 0.8 mm High 29
18 Aug 28.5 °C 50 % 44 km/h 0.3 mm High 35
19 Aug 28.5 °C 50 % 46 km/h 0.0 mm High 36
20 Aug 27.2 °C 58 % 41 km/h 1.3 mm High 35
21 Aug 28.1 °C 52 % 38 km/h 0.0 mm High 27
22 Aug 28.6 °C 50 % 33 km/h 0.0 mm High 29
23 Aug 29.5 °C 47 % 35 km/h 0.0 mm High 34
24 Aug 29.7 °C 46 % 31 km/h 0.0 mm High 31
25 Aug 29.3 °C 48 % 35 km/h 0.0 mm High 33
26 Aug 29.5 °C 50 % 54 km/h 0.1 mm Very high 46
27 Aug 29.8 °C 44 % 50 km/h 0.0 mm Very high 46
28 Aug 30.3 °C 47 % 41 km/h 0.0 mm Very high 40
29 Aug 29.8 °C 51 % 40 km/h 0.0 mm High 38
30 Aug 29.9 °C 45 % 43 km/h 0.0 mm Very high 41
31 Aug 28.9 °C 50 % 42 km/h 0.0 mm Very high 41
1 Sept 27.5 °C 54 % 34 km/h 1.0 mm High 31
2 Sept 28.8 °C 50 % 31 km/h 0.4 mm High 26
3 Sept 28.8 °C 54 % 32 km/h 0.0 mm High 27
4 Sept 29.4 °C 54 % 31 km/h 0.0 mm High 27
5 Sept 29.9 °C 49 % 29 km/h 0.0 mm High 27
6 Sept 31.1 °C 39 % 26 km/h 0.0 mm High 31
7 Sept 31.4 °C 40 % 30 km/h 0.0 mm High 32
8 Sept 32.1 °C 35 % 32 km/h 0.0 mm High 32
9 Sept 30.5 °C 53 % 34 km/h 0.3 mm High 34
10 Sept 31.6 °C 43 % 39 km/h 0.0 mm High 36
11 Sept 29.4 °C 50 % 47 km/h 0.5 mm Very high 42
12 Sept 29.6 °C 49 % 50 km/h 0.1 mm Very high 47
13 Sept 29.3 °C 51 % 45 km/h 0.7 mm High 32
14 Sept 29.5 °C 45 % 44 km/h 0.0 mm Very high 39
15 Sept 29.8 °C 47 % 45 km/h 0.0 mm Very high 40
16 Sept 30.0 °C 45 % 42 km/h 0.0 mm Very high 40
17 Sept 31.1 °C 36 % 46 km/h 0.0 mm Very high 48
18 Sept 29.5 °C 46 % 52 km/h 0.0 mm Extreme 51
19 Sept 28.8 °C 51 % 49 km/h 0.0 mm Very high 47
20 Sept after 28.4 °C 59 % 39 km/h 1.1 mm High 24

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 6 Aug 2026
After · 26 Sept 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 19 September 2026 the air beside the fire reached 24 µg/m³ of PM2.5. That day averaged 15: 1.0 times the WHO daily guideline (15).

PM2.5 peak24 µg/m³
Days over the guideline1 day
PM1031 µg/m³
Optical depth0.37
11 Aug20 Aug29 Aug7 Sept16 Sept
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 301Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the East Arnhem fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 13 August 2026 to 19 September 2026 (38 days). The perimeter dates it from 13 August 2026 to 16 September 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 10,046 hectares (100.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered East Arnhem (10,021 ha, 0.3 %).
What was the weather like?
During the fire the temperature reached 32.1 °C, humidity dropped to 35 % and gusts hit 54 km/h. The fire danger index (FWI) reached 51, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 13 August 2026 to 16 September 2026. 301 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.