Skip to content
worldfires
AU · Australia · –

East Arnhem fire, 22 July 2026 East Arnhem

Out · last detection 4 Aug 2026, 05:04 UTC

The fire started on 22 July 2026 in East Arnhem, Australia, and satellites saw it burning for 14 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 22,443 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
22,443ha
GWIS perimeter (Copernicus)
Duration
14days
22 Jul 2026 – 4 Aug 2026
Municipalities hit
1
local government areas
Started on
22 Jul
2026
Heat detections
567
in a single hotspot: 122 MW
Danger at start
21
Moderate · FWI index
Average daily power
769MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 22 Jul4 Aug
4 Aug 2026

How it evolved, day by day

22 Jul 2026 · 4,753 MW · 290 23 Jul 2026 · 7 MW · 4 24 Jul 2026 · 249 MW · 17 25 Jul 2026 · 1,471 MW · 154 26 Jul 2026 · 30 MW · 11 27 Jul 2026 · 916 MW · 52 28 Jul 2026 · 105 MW · 28 29 Jul 2026 · 110 MW · 6 1 Aug 2026 · 22 MW · 2 4 Aug 2026 · 25 MW · 3
22 Jul 24 Jul 26 Jul 28 Jul 1 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (19 passes) and with what wind. Watch the film

The weather it burned in

26°high
52km/h · peak gust
56%lowest humidity

It had gone 8 days without rain (1 mm or more) when it started.

This area had burned before

96% of the perimeter overlaps earlier fires recorded since 2016: 135 ha in 2016, 628 ha in 2017, 12,386 ha in 2018, 2,132 ha in 2019, 6,019 ha in 2020, 4,587 ha in 2021, 10,843 ha in 2022, 1,876 ha in 2023, 7,896 ha in 2024, 2,187 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 21,557 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 14% of the area of London (224 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. East Arnhem where it started
    22,562 ha
    0.7 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
22 Jul 25.1 °C 59 % 30 km/h 0.1 mm Moderate 21
23 Jul 25.3 °C 70 % 42 km/h 1.2 mm Moderate 17
24 Jul 25.7 °C 56 % 52 km/h 1.3 mm Moderate 16
25 Jul 24.7 °C 59 % 46 km/h 0.0 mm High 25
26 Jul 25.0 °C 56 % 47 km/h 0.4 mm High 27
27 Jul 24.2 °C 58 % 40 km/h 0.0 mm High 24
28 Jul 24.4 °C 59 % 36 km/h 0.0 mm High 24
29 Jul 25.0 °C 70 % 36 km/h 2.0 mm Moderate 20
30 Jul 24.3 °C 75 % 36 km/h 3.0 mm Very low 5
31 Jul 25.1 °C 73 % 39 km/h 1.7 mm Low 8
1 Aug 26.0 °C 61 % 47 km/h 0.0 mm Moderate 17
2 Aug 25.8 °C 63 % 36 km/h 0.2 mm Moderate 19
3 Aug 25.6 °C 69 % 38 km/h 0.8 mm Moderate 12
4 Aug 25.3 °C 65 % 42 km/h 0.0 mm Moderate 18
5 Aug after 25.7 °C 62 % 41 km/h 0.1 mm Moderate 21
6 Aug after 25.9 °C 62 % 35 km/h 0.0 mm Moderate 20
7 Aug after 25.9 °C 62 % 35 km/h 0.0 mm Moderate 19
8 Aug after 26.4 °C 56 % 29 km/h 0.0 mm Moderate 20
9 Aug after 27.3 °C 62 % 33 km/h 0.0 mm Moderate 14
10 Aug after 28.8 °C 54 % 33 km/h 0.0 mm Moderate 15
11 Aug after 26.8 °C 61 % 26 km/h 0.0 mm Moderate 18
12 Aug after 26.9 °C 59 % 26 km/h 0.0 mm Moderate 18
13 Aug after 26.4 °C 68 % 41 km/h 0.6 mm High 22
14 Aug after 26.7 °C 62 % 41 km/h 0.0 mm High 24

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 15 Jul 2026
After · 11 Aug 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 28 July 2026 the air beside the fire reached 41 µg/m³ of PM2.5. That day averaged 19: 1.3 times the WHO daily guideline (15).

PM2.5 peak41 µg/m³
Days over the guideline1 day
PM1045 µg/m³
Optical depth0.38
15 Jul20 Jul25 Jul30 Jul4 Aug
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 567Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the East Arnhem fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 22 July 2026 to 4 August 2026 (14 days). The perimeter dates it from 22 July 2026 to 1 August 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 22,443 hectares (224.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered East Arnhem (22,562 ha, 0.7 %).
What was the weather like?
During the fire the temperature reached 26.0 °C, humidity dropped to 56 % and gusts hit 52 km/h. The fire danger index (FWI) reached 27, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 1 August 2026 → 4 August 2026.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 22 July 2026 to 1 August 2026. 567 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.