Skip to content
worldfires
AU · Australia · –

East Arnhem fire, 27 July 2026 East Arnhem

Out · last detection 31 Aug 2026, 04:38 UTC

The fire started on 27 July 2026 in East Arnhem, Australia, and satellites saw it burning for 36 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 7,072 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Compare with…
Burnt area
7,072ha
GWIS perimeter (Copernicus)
Duration
36days
27 Jul 2026 – 31 Aug 2026
Municipalities hit
1
local government areas
Started on
27 Jul
2026
Heat detections
397
in a single hotspot: 161 MW
Danger at start
31
High · FWI index
Average daily power
167MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 27 Jul31 Aug
31 Aug 2026

How it evolved, day by day

27 Jul 2026 · 4 MW · 2 28 Jul 2026 · 20 MW · 4 29 Jul 2026 · 5 MW · 1 31 Jul 2026 · 16 MW · 2 1 Aug 2026 · 16 MW · 4 2 Aug 2026 · 23 MW · 7 3 Aug 2026 · 10 MW · 4 4 Aug 2026 · 1 MW · 1 5 Aug 2026 · 51 MW · 10 6 Aug 2026 · 35 MW · 5 7 Aug 2026 · 31 MW · 7 8 Aug 2026 · 130 MW · 23 9 Aug 2026 · 3,470 MW · 90 10 Aug 2026 · 317 MW · 30 11 Aug 2026 · 303 MW · 32 12 Aug 2026 · 82 MW · 18 13 Aug 2026 · 466 MW · 32 14 Aug 2026 · 111 MW · 23 15 Aug 2026 · 77 MW · 18 16 Aug 2026 · 45 MW · 8 17 Aug 2026 · 51 MW · 10 18 Aug 2026 · 94 MW · 9 19 Aug 2026 · 147 MW · 8 20 Aug 2026 · 26 MW · 4 21 Aug 2026 · 129 MW · 10 22 Aug 2026 · 50 MW · 7 23 Aug 2026 · 10 MW · 4 24 Aug 2026 · 16 MW · 3 25 Aug 2026 · 16 MW · 4 26 Aug 2026 · 54 MW · 3 27 Aug 2026 · 9 MW · 4 28 Aug 2026 · 30 MW · 5 29 Aug 2026 · 4 MW · 1 30 Aug 2026 · 2 MW · 2 31 Aug 2026 · 7 MW · 2
27 Jul 4 Aug 9 Aug 18 Aug 25 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (59 passes) and with what wind. Watch the film

The weather it burned in

28°high
56km/h · peak gust
50%lowest humidity

It had gone 18 days without rain (1 mm or more) when it started. Rain came after the fire: 1.0 mm on 1 Sept.

This area had burned before

80% of the perimeter overlaps earlier fires recorded since 2016: 4,839 ha in 2018, 3,539 ha in 2022, 1,681 ha in 2023, 962 ha in 2024. Part of it burned more than once, so the yearly figures add up to more than the 5,625 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 4.5% of the area of London (71 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. East Arnhem where it started
    6,808 ha
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
27 Jul 23.4 °C 57 % 45 km/h 0.0 mm High 31
28 Jul 24.5 °C 53 % 36 km/h 0.0 mm High 29
29 Jul 25.1 °C 66 % 40 km/h 0.9 mm High 29
30 Jul 25.6 °C 63 % 46 km/h 0.0 mm High 29
31 Jul 25.4 °C 63 % 46 km/h 0.3 mm High 29
1 Aug 26.5 °C 54 % 53 km/h 0.0 mm High 37
2 Aug 26.4 °C 56 % 39 km/h 0.3 mm High 30
3 Aug 26.1 °C 66 % 34 km/h 0.8 mm Moderate 19
4 Aug 25.8 °C 61 % 42 km/h 0.0 mm High 26
5 Aug 26.8 °C 53 % 43 km/h 0.0 mm High 32
6 Aug 26.5 °C 57 % 35 km/h 0.0 mm High 29
7 Aug 26.3 °C 57 % 32 km/h 0.0 mm High 25
8 Aug 27.1 °C 51 % 28 km/h 0.0 mm High 26
9 Aug 27.0 °C 63 % 22 km/h 0.0 mm High 22
10 Aug 27.8 °C 66 % 28 km/h 0.0 mm Moderate 19
11 Aug 27.0 °C 57 % 27 km/h 0.0 mm High 22
12 Aug 27.5 °C 50 % 20 km/h 0.0 mm Moderate 20
13 Aug 26.5 °C 59 % 46 km/h 0.0 mm High 36
14 Aug 26.9 °C 56 % 47 km/h 0.0 mm High 35
15 Aug 27.0 °C 61 % 35 km/h 0.0 mm High 28
16 Aug 26.6 °C 60 % 43 km/h 0.0 mm High 32
17 Aug 26.5 °C 61 % 40 km/h 0.0 mm High 31
18 Aug 26.2 °C 63 % 37 km/h 0.3 mm High 29
19 Aug 27.5 °C 51 % 48 km/h 0.0 mm High 34
20 Aug 26.4 °C 60 % 41 km/h 0.6 mm High 31
21 Aug 26.4 °C 62 % 38 km/h 0.0 mm High 29
22 Aug 27.3 °C 56 % 27 km/h 0.0 mm High 26
23 Aug 27.0 °C 57 % 31 km/h 0.2 mm High 28
24 Aug 27.5 °C 61 % 33 km/h 0.0 mm High 30
25 Aug 27.4 °C 58 % 33 km/h 0.0 mm High 30
26 Aug 27.2 °C 64 % 56 km/h 0.3 mm Very high 45
27 Aug 27.2 °C 54 % 52 km/h 0.0 mm Very high 44
28 Aug 27.6 °C 51 % 39 km/h 0.0 mm High 36
29 Aug 27.6 °C 57 % 32 km/h 0.0 mm High 30
30 Aug 27.0 °C 61 % 47 km/h 0.2 mm Very high 39
31 Aug 26.4 °C 63 % 45 km/h 1.2 mm High 23
1 Sept after 26.5 °C 62 % 42 km/h 1.0 mm High 24

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 20 Jul 2026
After · 7 Sept 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 10 August 2026 the air beside the fire reached 54 µg/m³ of PM2.5. That day averaged 28: 1.9 times the WHO daily guideline (15).

PM2.5 peak54 µg/m³
Days over the guideline3 days
PM1057 µg/m³
Optical depth0.82
25 Jul3 Aug12 Aug21 Aug30 Aug
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 397Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the East Arnhem fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 27 July 2026 to 31 August 2026 (36 days). The perimeter dates it from 27 July 2026 to 28 August 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 7,072 hectares (70.7 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered East Arnhem (6,808 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 27.8 °C, humidity dropped to 50 % and gusts hit 56 km/h. The fire danger index (FWI) reached 45, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 27 July 2026 to 28 August 2026. 397 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.