Skip to content
worldfires
UK · United Kingdom ·

Dumfries and Galloway fire, 1 April 2025 Dumfries and Galloway, South Lanarkshire

Out · last measured on 1 Apr 2025

The fire started on 1 April 2025 in Dumfries and Galloway, United Kingdom, and satellites saw it burning for 1 day. Copernicus mapped a burnt perimeter of 133 hectares from satellite imagery, spread across 2 municipalities.

This entry is probably a heather, gorse or hill-grazing burn, not a wildfire. In the UK and Ireland moors and hillsides are burnt every winter and spring to renew grazing or heather. This is our assumption, based on the time of year, ground with almost no woodland and the lack of news about this fire; it is not confirmed. That is why it is left out of the wildfire rankings.

We have the Copernicus perimeter for this fire, but not yet its hotspots: NASA publishes the yearly hotspot archive only once the year closes. The page picks it up automatically when it is available.

Burnt area
133ha
Copernicus perimeter
Duration
1day
1 Apr 2025 – 1 Apr 2025
Municipalities hit
2
districts
Started on
1 Apr
2025
Danger at start
2
Very low · FWI index
Protected area
100%
of the perimeter is protected land

Where it burned

The weather it burned in

15°high
42km/h · peak gust
30%lowest humidity

It had gone 2 days without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

What happened to each town

  1. Dumfries and Galloway where it started
    104 ha
    0.0 %
  2. 30 ha
    0.0 %

Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

  • Other natural land100 %

Protected area affected (EFFIS layer): 100 %

Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
1 Apr 15.4 °C 30 % 42 km/h 0.0 mm Very low 2
2 Apr after 14.6 °C 45 % 37 km/h 0.0 mm Very low 4
3 Apr after 14.8 °C 46 % 50 km/h 0.0 mm Low 6
4 Apr after 13.0 °C 54 % 49 km/h 0.0 mm Low 7
5 Apr after 11.1 °C 53 % 46 km/h 0.0 mm Low 7
6 Apr after 13.9 °C 43 % 29 km/h 0.0 mm Very low 5
7 Apr after 14.6 °C 49 % 17 km/h 0.0 mm Very low 3
8 Apr after 15.3 °C 45 % 21 km/h 0.0 mm Very low 5
9 Apr after 11.9 °C 59 % 29 km/h 0.0 mm Low 5
10 Apr after 15.0 °C 53 % 35 km/h 0.0 mm Low 6
11 Apr after 15.4 °C 41 % 31 km/h 0.0 mm Low 7

Its twins: fires that started in the same weather

It started with an FWI of 2.1, a minimum humidity of 30% and 2 days without rain. Fires in the area that started in weather like this since 2016: 7.

FWI at the start 2.1
Minimum humidity 30 %
Days without rain 2
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Highland fire, April 2023
3,446 ha 4 days FWI 4.6 Min. humidity 36 % 190 km away, in 2023

First rain (1 mm or more) after it ended: 11.7 mm on 27 Apr.

What happened to them

Fires in the area that started in similar weather: 7. With fewer than 15 we give no figures: they would be more noise than signal.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
42km/h · max. gust

It was considered over on 1 Apr, and not even 1 mm fell in the following ten days: it went out without rain.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 25 Mar 2025
After · 8 Apr 2025

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 1 April 2025 the air beside the fire reached 18 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak18 µg/m³
Days over the guideline0 days
PM1022 µg/m³
Optical depth0.20
30 Mar1 Apr3 Apr
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Other fires nearby

All fires in United Kingdom

Frequently asked questions

How long did the Dumfries and Galloway fire last?
Copernicus dates it between 1 April 2025 and 1 April 2025: 1 day between the first and last image with fire.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 133 hectares (1.3 km²). Official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Dumfries and Galloway (104 ha, 0.0 %); South Lanarkshire (30 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 15.4 °C, humidity dropped to 30 % and gusts hit 42 km/h. The fire danger index (FWI) reached 2, class Very low.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of United Kingdom (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 999 · 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 999 · 112.

How we know this
  • Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. No Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Open Government Licence v3.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.