Skip to content
worldfires
CF · Central African Republic · –

Djema fire, 10 December 2020 Djema

Out · last detection 8 Jan 2021, 12:02 UTC

The fire started on 10 December 2020 in Djema, Central African Republic, and satellites saw it burning for 30 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 72,593 hectares from heat detections, spread across a single municipality.

It is the 9th largest in Haut-Mbomou since 2016 (of 270 with a page). Number 8 in Central African Republic in 2020, of 101.

Compare with…
Burnt area
72,593ha
GWIS perimeter (Copernicus)
Duration
30days
10 Dec 2020 – 8 Jan 2021
Municipalities hit
1
sub-prefectures
Started on
10 Dec
2020
Heat detections
3,559
in a single hotspot: 156 MW
Danger at start
51
Extreme · FWI index
Average daily power
996MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 10 Dec8 Jan
8 Jan 2021

How it evolved, day by day

10 Dec 2020 · 105 MW · 14 11 Dec 2020 · 642 MW · 40 12 Dec 2020 · 495 MW · 43 13 Dec 2020 · 169 MW · 15 14 Dec 2020 · 446 MW · 42 15 Dec 2020 · 413 MW · 53 16 Dec 2020 · 1,098 MW · 183 17 Dec 2020 · 2,955 MW · 320 18 Dec 2020 · 3,337 MW · 207 19 Dec 2020 · 4,433 MW · 393 20 Dec 2020 · 1,800 MW · 406 21 Dec 2020 · 1,672 MW · 177 22 Dec 2020 · 532 MW · 105 23 Dec 2020 · 1,562 MW · 215 24 Dec 2020 · 1,326 MW · 219 25 Dec 2020 · 117 MW · 46 26 Dec 2020 · 1,472 MW · 306 27 Dec 2020 · 242 MW · 36 28 Dec 2020 · 70 MW · 7 29 Dec 2020 · 2,133 MW · 183 30 Dec 2020 · 3,179 MW · 256 31 Dec 2020 · 609 MW · 116 1 Jan 2021 · 62 MW · 23 2 Jan 2021 · 235 MW · 20 3 Jan 2021 · 195 MW · 25 4 Jan 2021 · 360 MW · 43 5 Jan 2021 · 144 MW · 47 6 Jan 2021 · 50 MW · 14 7 Jan 2021 · 23 MW · 4 8 Jan 2021 · 2 MW · 1
10 Dec 19 Dec 28 Dec 3 Jan

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

35°high
45km/h · peak gust
9%lowest humidity

It had gone 36 days without rain (1 mm or more) when it started.

This area had burned before

77% of the perimeter overlaps earlier fires recorded since 2016: 32,661 ha in 2016, 28,772 ha in 2017, 11,304 ha in 2018, 22,056 ha in 2019. Part of it burned more than once, so the yearly figures add up to more than the 55,911 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 46% of the area of London (726 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Djema where it started
    63,606 ha reached on 10 Dec
    1.7 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Very dry air: 42 % of the area in Central African Republic

Day High Min. humidity Peak gust Rain Danger (FWI)
10 Dec 34.5 °C 11 % 36 km/h 0.0 mm Extreme 51
11 Dec 35.0 °C 14 % 35 km/h 0.0 mm Extreme 51
12 Dec 35.0 °C 16 % 38 km/h 0.0 mm Extreme 52
13 Dec 35.3 °C 14 % 36 km/h 0.0 mm Extreme 52
14 Dec 35.4 °C 13 % 32 km/h 0.0 mm Very high 49
15 Dec 35.3 °C 12 % 34 km/h 0.0 mm Extreme 51
16 Dec 33.9 °C 9 % 45 km/h 0.0 mm Extreme 58
17 Dec 32.9 °C 12 % 42 km/h 0.0 mm Extreme 58
18 Dec 32.6 °C 13 % 40 km/h 0.0 mm Extreme 55
19 Dec 32.6 °C 14 % 38 km/h 0.0 mm Extreme 54
20 Dec 33.1 °C 15 % 33 km/h 0.0 mm Extreme 50
21 Dec 33.4 °C 14 % 39 km/h 0.0 mm Extreme 54
22 Dec 34.0 °C 17 % 40 km/h 0.0 mm Extreme 53
23 Dec 34.7 °C 17 % 32 km/h 0.0 mm Very high 49
24 Dec 34.6 °C 16 % 40 km/h 0.0 mm Extreme 54
25 Dec 34.5 °C 18 % 35 km/h 0.0 mm Extreme 50
26 Dec 33.5 °C 17 % 39 km/h 0.0 mm Extreme 53
27 Dec 34.0 °C 17 % 36 km/h 0.0 mm Extreme 52
28 Dec 33.7 °C 17 % 37 km/h 0.0 mm Extreme 52
29 Dec 34.4 °C 13 % 38 km/h 0.0 mm Extreme 52
30 Dec 34.9 °C 15 % 40 km/h 0.0 mm Extreme 54
31 Dec 34.6 °C 14 % 38 km/h 0.0 mm Extreme 53
1 Jan 34.6 °C 13 % 37 km/h 0.0 mm Extreme 52
2 Jan 34.1 °C 15 % 35 km/h 0.0 mm Extreme 51
3 Jan 34.7 °C 12 % 33 km/h 0.0 mm Extreme 51
4 Jan 34.6 °C 16 % 41 km/h 0.0 mm Extreme 56
5 Jan 34.2 °C 14 % 41 km/h 0.0 mm Extreme 56
6 Jan 34.5 °C 13 % 43 km/h 0.0 mm Extreme 58
7 Jan 34.0 °C 11 % 41 km/h 0.0 mm Extreme 57
8 Jan 33.1 °C 13 % 40 km/h 0.0 mm Extreme 56
9 Jan after 32.7 °C 14 % 33 km/h 0.0 mm Extreme 53
10 Jan after 32.6 °C 11 % 38 km/h 0.0 mm Extreme 55
11 Jan after 32.8 °C 10 % 38 km/h 0.0 mm Extreme 55
12 Jan after 33.8 °C 11 % 36 km/h 0.0 mm Extreme 54
13 Jan after 34.6 °C 11 % 37 km/h 0.0 mm Extreme 55
14 Jan after 34.4 °C 11 % 38 km/h 0.0 mm Extreme 55
15 Jan after 33.9 °C 11 % 37 km/h 0.0 mm Extreme 55
16 Jan after 33.8 °C 12 % 37 km/h 0.0 mm Extreme 56
17 Jan after 34.7 °C 10 % 36 km/h 0.0 mm Extreme 55
18 Jan after 34.0 °C 9 % 44 km/h 0.0 mm Extreme 61

Its twins: fires that started in the same weather

It started with an FWI of 51.4, a minimum humidity of 11% and 36 days without rain. Fires in the area that started in weather like this since 2016: 43.

FWI at the start 51.4
Minimum humidity 11 %
Days without rain 36
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Yalinga fire, January 2016
8,321 ha 21 days FWI 51.0 Min. humidity 11 % 174 km away, in 2016

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

13 days
median duration
6,409 ha
median area
16 %
went past 10,000 ha
—
rain at the end (median; 0 of 43 had it)

It was 11.3 times larger than the median of its twins and lasted 30 days, against 13 days.

None of its 43 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In none of them did 1 mm fall in the ten days after the end: they all went out without rain.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
45km/h · max. gust

It was considered over on 8 Jan, and not even 1 mm fell in the following ten days: it went out without rain. None of its 43 twins had rain when they ended.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 3 Dec 2020
After · 15 Jan 2021

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 3,559Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Central African Republic

Frequently asked questions

How long did the Djema fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 10 December 2020 to 8 January 2021 (30 days). The perimeter dates it from 15 December 2020 to 1 January 2021.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 72,593 hectares (725.9 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Djema (63,606 ha, 1.7 %).
What was the weather like?
During the fire the temperature reached 35.4 °C, humidity dropped to 9 % and gusts hit 45 km/h. The fire danger index (FWI) reached 58, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Central African Republic (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 43. Their median duration was 13 days and their median area 6,409 ha; 16 % went past 10,000 ha. None of its 43 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In none of them did 1 mm fall in the ten days after the end: they all went out without rain.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 11 December 2020 → 10 December 2020.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 5 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 15 December 2020 to 1 January 2021. 3,559 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.